All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 07/10] drm/i915/crt: s/pipe_config/crtc_state/
Date: Fri, 08 Nov 2024 15:14:13 +0200	[thread overview]
Message-ID: <87ed3leul6.fsf@intel.com> (raw)
In-Reply-To: <20241107161123.16269-8-ville.syrjala@linux.intel.com>

On Thu, 07 Nov 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Call the crtc state 'crtc_state' rather than 'pipe_config',
> as is the modern style.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_crt.c | 62 ++++++++++++------------
>  1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
> index 4784a858b4a2..0962a239288b 100644
> --- a/drivers/gpu/drm/i915/display/intel_crt.c
> +++ b/drivers/gpu/drm/i915/display/intel_crt.c
> @@ -150,27 +150,27 @@ static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
>  }
>  
>  static void intel_crt_get_config(struct intel_encoder *encoder,
> -				 struct intel_crtc_state *pipe_config)
> +				 struct intel_crtc_state *crtc_state)
>  {
> -	pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
> +	crtc_state->output_types |= BIT(INTEL_OUTPUT_ANALOG);
>  
> -	pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
> +	crtc_state->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
>  
> -	pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
> +	crtc_state->hw.adjusted_mode.crtc_clock = crtc_state->port_clock;
>  }
>  
>  static void hsw_crt_get_config(struct intel_encoder *encoder,
> -			       struct intel_crtc_state *pipe_config)
> +			       struct intel_crtc_state *crtc_state)
>  {
> -	lpt_pch_get_config(pipe_config);
> +	lpt_pch_get_config(crtc_state);
>  
> -	hsw_ddi_get_config(encoder, pipe_config);
> +	hsw_ddi_get_config(encoder, crtc_state);
>  
> -	pipe_config->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
> -					      DRM_MODE_FLAG_NHSYNC |
> -					      DRM_MODE_FLAG_PVSYNC |
> -					      DRM_MODE_FLAG_NVSYNC);
> -	pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
> +	crtc_state->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
> +						DRM_MODE_FLAG_NHSYNC |
> +						DRM_MODE_FLAG_PVSYNC |
> +						DRM_MODE_FLAG_NVSYNC);
> +	crtc_state->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
>  }
>  
>  /* Note: The caller is required to filter out dpms modes not supported by the
> @@ -408,48 +408,48 @@ intel_crt_mode_valid(struct drm_connector *connector,
>  }
>  
>  static int intel_crt_compute_config(struct intel_encoder *encoder,
> -				    struct intel_crtc_state *pipe_config,
> +				    struct intel_crtc_state *crtc_state,
>  				    struct drm_connector_state *conn_state)
>  {
>  	struct drm_display_mode *adjusted_mode =
> -		&pipe_config->hw.adjusted_mode;
> +		&crtc_state->hw.adjusted_mode;
>  
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> -	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
> -	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> +	crtc_state->sink_format = INTEL_OUTPUT_FORMAT_RGB;
> +	crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	return 0;
>  }
>  
>  static int pch_crt_compute_config(struct intel_encoder *encoder,
> -				  struct intel_crtc_state *pipe_config,
> +				  struct intel_crtc_state *crtc_state,
>  				  struct drm_connector_state *conn_state)
>  {
>  	struct drm_display_mode *adjusted_mode =
> -		&pipe_config->hw.adjusted_mode;
> +		&crtc_state->hw.adjusted_mode;
>  
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> -	pipe_config->has_pch_encoder = true;
> -	if (!intel_fdi_compute_pipe_bpp(pipe_config))
> +	crtc_state->has_pch_encoder = true;
> +	if (!intel_fdi_compute_pipe_bpp(crtc_state))
>  		return -EINVAL;
>  
> -	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> +	crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	return 0;
>  }
>  
>  static int hsw_crt_compute_config(struct intel_encoder *encoder,
> -				  struct intel_crtc_state *pipe_config,
> +				  struct intel_crtc_state *crtc_state,
>  				  struct drm_connector_state *conn_state)
>  {
>  	struct intel_display *display = to_intel_display(encoder);
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct drm_display_mode *adjusted_mode =
> -		&pipe_config->hw.adjusted_mode;
> +		&crtc_state->hw.adjusted_mode;
>  
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
> @@ -459,30 +459,30 @@ static int hsw_crt_compute_config(struct intel_encoder *encoder,
>  	    adjusted_mode->crtc_hblank_start > 4096)
>  		return -EINVAL;
>  
> -	pipe_config->has_pch_encoder = true;
> -	if (!intel_fdi_compute_pipe_bpp(pipe_config))
> +	crtc_state->has_pch_encoder = true;
> +	if (!intel_fdi_compute_pipe_bpp(crtc_state))
>  		return -EINVAL;
>  
> -	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> +	crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	/* LPT FDI RX only supports 8bpc. */
>  	if (HAS_PCH_LPT(dev_priv)) {
>  		/* TODO: Check crtc_state->max_link_bpp_x16 instead of bw_constrained */
> -		if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
> +		if (crtc_state->bw_constrained && crtc_state->pipe_bpp < 24) {
>  			drm_dbg_kms(display->drm,
>  				    "LPT only supports 24bpp\n");
>  			return -EINVAL;
>  		}
>  
> -		pipe_config->pipe_bpp = 24;
> +		crtc_state->pipe_bpp = 24;
>  	}
>  
>  	/* FDI must always be 2.7 GHz */
> -	pipe_config->port_clock = 135000 * 2;
> +	crtc_state->port_clock = 135000 * 2;
>  
> -	pipe_config->enhanced_framing = true;
> +	crtc_state->enhanced_framing = true;
>  
> -	adjusted_mode->crtc_clock = lpt_iclkip(pipe_config);
> +	adjusted_mode->crtc_clock = lpt_iclkip(crtc_state);
>  
>  	return 0;
>  }

-- 
Jani Nikula, Intel

  reply	other threads:[~2024-11-08 13:14 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-07 16:11 [PATCH 00/10] drm/i915: Potential boot oops fix and some cleanups Ville Syrjala
2024-11-07 16:11 ` [PATCH 01/10] drm/i915: Grab intel_display from the encoder to avoid potential oopsies Ville Syrjala
2024-11-08 13:00   ` Jani Nikula
2024-11-11 22:03     ` Ville Syrjälä
2024-11-07 16:11 ` [PATCH 02/10] drm/i915/crt: Split long line Ville Syrjala
2024-11-08 13:01   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 03/10] drm/i915/crt: Drop the unused ADPA_DPMS bit definitions Ville Syrjala
2024-11-08 13:02   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 04/10] drm/i915/crt: Use REG_BIT() & co Ville Syrjala
2024-11-08 13:08   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 05/10] drm/i915/crt: Clean up ADPA_HOTPLUG_BITS definitions Ville Syrjala
2024-11-08 13:12   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 06/10] drm/i915/crt: Extract intel_crt_regs.h Ville Syrjala
2024-11-08 13:13   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 07/10] drm/i915/crt: s/pipe_config/crtc_state/ Ville Syrjala
2024-11-08 13:14   ` Jani Nikula [this message]
2024-11-07 16:11 ` [PATCH 08/10] drm/i915/crt: Drop pointless drm_device variables Ville Syrjala
2024-11-08 13:15   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 09/10] drm/i915/crt: Rename some variables Ville Syrjala
2024-11-08 13:16   ` Jani Nikula
2024-11-07 16:11 ` [PATCH 10/10] drm/i915/crt: Nuke unused crt->connector Ville Syrjala
2024-11-08 13:16   ` Jani Nikula
2024-11-08  4:56 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Potential boot oops fix and some cleanups (rev2) Patchwork
2024-11-08  4:56 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-11-08  5:10 ` ✗ Fi.CI.BAT: failure " Patchwork
2024-11-08 17:08 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Potential boot oops fix and some cleanups (rev3) Patchwork
2024-11-08 17:08 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-11-08 17:24 ` ✓ Fi.CI.BAT: success " Patchwork
2024-11-08 18:22 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ed3leul6.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.