Re: QEMU for aarch64 with plugins seems to fail basic consistency checks

["Alex Bennée" <alex.bennee@linaro.org>]

Robert Henry <robhenry@microsoft.com> writes:

> I wrote a QEMU plugin for aarch64 where the insn and mem callbacks
> print out the specifics of the guest instructions as they are
> "executed".  I expect this trace stream to be well behaved but it is
> not.

Can you post your plugin? It's hard to diagnose what might be wrong
without the actual code.

> By well-behaved, I expect memory insns print out some memory details,
> non-memory insns don't print anything, and the pc only changes after a
> control flow instruction.

Exactly how are you tracking the PC? You should have the correct PC as
you instrument each instruction. Are you saying qemu_plugin_insn_vaddr()
doesn't report a different PC for each instrumented instruction in a block?

> I don't see that gross correctness about 2%
> of the time.


>
>
>   1.  I'm using qemu at tag v4.2.0 (or master head; it doesn't matter), running on a x86_64 host.
>   2.  I build qemu using   ./configure --disable-sdl --enable-gtk --enable-plugins --enable-debug --target-list=aarch64-softmmu aarch64-linux-user
>   3.  I execute qemu from its build area build/aarch64-linux-user/qemu-aarch64, with flags --cpu cortex-a72 and the appropriate args to --plugin ... -d plugin -D .....
>   4.  I'm emulating a simple C program in linux emulation mode.
>   5.  The resulting qemu execution is valgrind clean (eg, I run qemu under valgrind) for my little program save for memory leaks I reported a few days ago.
>
> Below is an example of my trace output (the first int printed is the cpu_index, checked to be always 0). Note that the ldr instruction at 0x41a608 sometimes reports a memop, but most of the time it doesn't.  Note that 0x41a608 is seen, by trace, running back to back. Note that (bottom of trace) that the movz instruction reports a memop.  (The executed code comes from glibc _dl_aux_init, executed before main() is called.)
>
> How should this problem be tackled? I can't figure out how to make each tcg block be exactly 1 guest (aarch64) insn, which is where I'd first start out.
>
> 0 0x000000000041a784 0x000000000041a784 0xf1000c3f cmp x1, #3
> 0 0x000000000041a788 0x000000000041a788 0x54fff401 b.ne #0xfffffffffffffe80
> 0 0x000000000041a78c 0x000000000041a78c 0x52800033 movz w19, #0x1
> 0 0x000000000041a790 0x000000000041a790 0xf9400416 ldr x22, [x0, #8] 0 mem  {3 0 0 0} 0x0000004000800618
> 0 0x000000000041a794 0x000000000041a794 0x17ffff9d b #0xfffffffffffffe74
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!  0 mem  {3 0 0 0} 0x0000004000800620
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!  0 mem  {3 0 0 0} 0x0000004000800630
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a608 0x000000000041a608 0xf8410c01 ldr x1, [x0, #0x10]!
> 0 0x000000000041a60c 0x000000000041a60c 0xb4000221 cbz x1, #0x44
> 0 0x000000000041a7d8 0x000000000041a7d8 0x52800035 movz w21, #0x1
> 0 0x000000000041a7dc 0x000000000041a7dc 0xf9400418 ldr x24, [x0, #8] 0 mem  {3 0 0 0} 0x0000004000800638
> 0 0x000000000041a7e0 0x000000000041a7e0 0x17ffff8a b #0xfffffffffffffe28
> 0 0x000000000041a7d8 0x000000000041a7d8 0x52800035 movz w21, #0x1 0 mem  {3 0 0 0} 0x0000004000800640

I'd like to see the -d in_asm,op,op_opt for that unexpected memop operation.

-- 
Alex Bennée