From: Chris Brannon <cmb@prgmr.com>
To: George Dunlap <dunlapg@umich.edu>
Cc: Xen-devel <xen-devel@lists.xen.org>
Subject: Re: xen 4.10.0: stubdomain for HVM guest fails to start unless qdisk backend is used?
Date: Mon, 12 Mar 2018 11:33:00 -0700 [thread overview]
Message-ID: <87efkpp2jn.fsf@prgmr.com> (raw)
In-Reply-To: <CAFLBxZbQR+zrrbdnmNWfjs=XrdU=pB8KkJbV9z1p=k_R34M=5A@mail.gmail.com> (George Dunlap's message of "Mon, 12 Mar 2018 14:28:50 +0000")
[-- Attachment #1: Type: text/plain, Size: 582 bytes --]
George Dunlap <dunlapg@umich.edu> writes:
> Can you attach the following?
>
> * the output of `xl dmesg`
> * the output of `dmesg`
> * the config file for the guest
Attached.
> I just tested stubdoms with staging-4.10 and everything works
> correctly *as long as dom0 is assigned all memory*. If I limit the
> amount of dom0 memory to 1GiB, then stubdomains *doesn't* work with
> qdisk; only works with the defautl ("phy") backend.
Oh now that is interesting.
For what it's worth, I have seen this on both xen-4.10.0 and
stable-4.10. I have not tried staging-4.10.
-- Chris
[-- Attachment #2: xldmesg-out.txt --]
[-- Type: text/plain, Size: 8747 bytes --]
Xen 4.10.0-1_prgmr.el6
(XEN) Xen version 4.10.0-1_prgmr.el6 (cmb@centos.org) (gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18)) debug=n Wed Mar 7 17:18:35 PST 2018
(XEN) Latest ChangeSet: Wed Sep 13 17:16:31 2017 +0100 git:62bd6f0-dirty
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: cpuinfo loglvl=all guest_loglvl=error dom0_mem=2560M,max:2560M com1=115200,8n1 console=com1 dom0_max_vcpus=2 dom0_vcpus_pin=true dom0_nodes=0 pv-linear-pt=true
(XEN) Xen image load base address: 0
(XEN) Video information:
(XEN) No VGA detected
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f0000000 (usable)
(XEN) 00000000fc000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000210000000 (usable)
(XEN) New Xen image base address: 0xefa00000
(XEN) ACPI: RSDP 000EA020, 0024 (r2 Xen)
(XEN) ACPI: XSDT FC00C750, 0054 (r1 Xen HVM 0 HVML 0)
(XEN) ACPI: FACP FC00C440, 00F4 (r4 Xen HVM 0 HVML 0)
(XEN) ACPI: DSDT FC003940, 8A7E (r2 Xen HVM 0 INTL 20090123)
(XEN) ACPI: FACS FC003900, 0040
(XEN) ACPI: APIC FC00C540, 00A0 (r2 Xen HVM 0 HVML 0)
(XEN) ACPI: HPET FC00C660, 0038 (r1 Xen HVM 0 HVML 0)
(XEN) ACPI: WAET FC00C6A0, 0028 (r1 Xen HVM 0 HVML 0)
(XEN) ACPI: SSDT FC00C6D0, 0031 (r2 Xen HVM 0 INTL 20090123)
(XEN) ACPI: SSDT FC00C710, 0031 (r2 Xen HVM 0 INTL 20090123)
(XEN) System RAM: 8191MB (8388216kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000210000000
(XEN) Domain heap initialised
(XEN) CPU Vendor: Intel, Family 6 (0x6), Model 62 (0x3e), Stepping 4 (raw 000306e4)
(XEN) found SMP MP-table at 000fb710
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0xb008 (32 bits)
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:b004,1:0], pm1x_evt[1:b000,1:0]
(XEN) ACPI: wakeup_vec[fc00390c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] enabled)
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ5 used by override.
(XEN) ACPI: IRQ10 used by override.
(XEN) ACPI: IRQ11 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 1504 MSI/MSI-X
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) Levelling caps: 0x1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) CPU0: Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Platform timer is 62.500MHz HPET
(XEN) Detected 2200.058 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d080410558 -> ffff82d080411c8c
(XEN) I/O virtualisation disabled
(XEN) CPU0: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) nr_sockets: 1
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) TSC deadline timer enabled
(XEN) Allocated console ring of 64 KiB.
(XEN) mwait-idle: does not run on family 6 model 62
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Booting processor 1/2 eip 8e000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 2/4 eip 8e000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) CPU2: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 3/6 eip 8e000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) CPU3: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 4/8 eip 8e000
(XEN) Initializing CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 4
(XEN) CPU4: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 5/10 eip 8e000
(XEN) Initializing CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 5
(XEN) CPU5: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 6/12 eip 8e000
(XEN) Initializing CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 6
(XEN) CPU6: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Booting processor 7/14 eip 8e000
(XEN) Initializing CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 25600K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 7
(XEN) CPU7: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz stepping 04
(XEN) Brought up 8 CPUs
(XEN) build-id: ec7cace1e9215d3ed63fa87ff8c7804d9712e15b
(XEN) HPET: 0 timers usable for broadcast (3 total)
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) xenoprof: Initialization failed. Intel processor family 6 model 62 is not supported
(XEN) Dom0 has maximum 432 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2497000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000200000000->0000000204000000 (634381 pages to be allocated)
(XEN) Init. ramdisk: 000000020ee0d000->0000000210000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff82497000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008000500000
(XEN) Start info: ffffffff82497000->ffffffff824974b4
(XEN) Page tables: ffffffff82498000->ffffffff824af000
(XEN) Boot stack: ffffffff824af000->ffffffff824b0000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff81fa4180
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Scrubbing Free RAM on 1 nodes using 8 CPUs
(XEN) .........done.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Errors
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 444kB init memory
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:01.1
(XEN) PCI add device 0000:00:01.3
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:04.0
(XEN) PCI add device 0000:00:05.0
[-- Attachment #3: dmesg-out.txt --]
[-- Type: text/plain, Size: 38667 bytes --]
[ 0.000000] Linux version 4.9.58 (poisonivy@gotham-earth2) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #6 SMP Wed Feb 7 19:06:24 UTC 2018
[ 0.000000] Command line: ro root=UUID=0cef071f-495f-445b-8bc2-aba8c13fe1b1 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun64 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM edd=off max_loop=768 swiotlb=32768 console=hvc0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000a0061fff] usable
[ 0.000000] Xen: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Xen HVM domU, BIOS 4.8.2-1_prgmr.el6 10/02/2017
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xa0062 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x0246b000, 0x0246bfff] PGTABLE
[ 0.000000] BRK [0x0246c000, 0x0246cfff] PGTABLE
[ 0.000000] BRK [0x0246d000, 0x0246dfff] PGTABLE
[ 0.000000] BRK [0x0246e000, 0x0246efff] PGTABLE
[ 0.000000] BRK [0x0246f000, 0x0246ffff] PGTABLE
[ 0.000000] BRK [0x02470000, 0x02470fff] PGTABLE
[ 0.000000] BRK [0x02471000, 0x02471fff] PGTABLE
[ 0.000000] BRK [0x02472000, 0x02472fff] PGTABLE
[ 0.000000] BRK [0x02473000, 0x02473fff] PGTABLE
[ 0.000000] BRK [0x02474000, 0x02474fff] PGTABLE
[ 0.000000] BRK [0x02475000, 0x02475fff] PGTABLE
[ 0.000000] BRK [0x02476000, 0x02476fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x04000000-0x051f2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
[ 0.000000] ACPI: XSDT 0x00000000FC00C750 000054 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 0x00000000FC00C440 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 0x00000000FC003940 008A7E (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: FACS 0x00000000FC003900 000040
[ 0.000000] ACPI: FACS 0x00000000FC003900 000040
[ 0.000000] ACPI: APIC 0x00000000FC00C540 0000A0 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: HPET 0x00000000FC00C660 000038 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: WAET 0x00000000FC00C6A0 000028 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: SSDT 0x00000000FC00C6D0 000031 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: SSDT 0x00000000FC00C710 000031 (v02 Xen HVM 00000000 INTL 20090123)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000a0061fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x9fafb000-0x9fb1cfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000a0061fff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a0061fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000a0061fff]
[ 0.000000] On node 0 totalpages: 655359
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10178 pages used for memmap
[ 0.000000] DMA32 zone: 651362 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 600000
[ 0.000000] Remapped 98 page(s)
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xa0062000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.10.0-1_prgmr.el6 (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff88009c600000 s109528 r8192 d29736 u262144
[ 0.000000] pcpu-alloc: s109528 r8192 d29736 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 645096
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: ro root=UUID=0cef071f-495f-445b-8bc2-aba8c13fe1b1 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun64 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM edd=off max_loop=768 swiotlb=32768 console=hvc0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x98600000-0x9c600000] (64MB) mapped at [ffff880098600000-ffff88009c5fffff]
[ 0.000000] Memory: 2461336K/2621436K available (8659K kernel code, 1565K rwdata, 4060K rodata, 2420K init, 2544K bss, 160100K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:524544 nr_irqs:512 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [hvc0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2199.983 MHz processor
[ 0.003000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.11 BogoMIPS (lpj=2200058)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.005069] ACPI: Core revision 20160831
[ 0.018542] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.020385] Security Framework initialized
[ 0.021015] Yama: becoming mindful.
[ 0.022034] SELinux: Initializing.
[ 0.023101] SELinux: Starting in permissive mode
[ 0.023758] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.025376] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.026587] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027032] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.028936] CPU: Physical Processor ID: 0
[ 0.029011] CPU: Processor Core ID: 0
[ 0.030019] mce: CPU supports 2 MCE banks
[ 0.031038] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.032013] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
[ 0.035013] Freeing SMP alternatives memory: 32K
[ 0.040806] ftrace: allocating 34088 entries in 134 pages
[ 0.050199] smpboot: Max logical packages: 1
[ 0.051022] VPMU disabled by hypervisor.
[ 0.052053] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only.
[ 0.056526] installing Xen timer for CPU 1
[ 0.057559] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.058016] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.059102] x86: Booted up 1 node, 2 CPUs
[ 0.060437] devtmpfs: initialized
[ 0.066575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.075028] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.076220] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.077015] pinctrl core: initialized pinctrl subsystem
[ 0.078819] NET: Registered protocol family 16
[ 0.079053] xen:grant_table: Grant tables using version 1 layout
[ 0.080042] Grant table initialized
[ 0.083584] ACPI: bus type PCI registered
[ 0.084017] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086121] PCI: Using configuration type 1 for base access
[ 0.100261] ACPI: Added _OSI(Module Device)
[ 0.104029] ACPI: Added _OSI(Processor Device)
[ 0.106008] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109009] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.112308] xen: registering gsi 9 triggering 0 polarity 1
[ 0.119740] ACPI: Interpreter enabled
[ 0.122027] ACPI: (supports S0 S3 S5)
[ 0.124007] ACPI: Using IOAPIC for interrupt routing
[ 0.128092] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144014] random: fast init done
[ 0.196521] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.197027] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.198032] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.199047] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.202418] acpiphp: Slot [0] registered
[ 0.203760] acpiphp: Slot [3] registered
[ 0.204305] acpiphp: Slot [4] registered
[ 0.205309] acpiphp: Slot [5] registered
[ 0.206321] acpiphp: Slot [6] registered
[ 0.207300] acpiphp: Slot [7] registered
[ 0.208285] acpiphp: Slot [8] registered
[ 0.209291] acpiphp: Slot [9] registered
[ 0.210284] acpiphp: Slot [10] registered
[ 0.211313] acpiphp: Slot [11] registered
[ 0.212303] acpiphp: Slot [12] registered
[ 0.213311] acpiphp: Slot [13] registered
[ 0.214304] acpiphp: Slot [14] registered
[ 0.215312] acpiphp: Slot [15] registered
[ 0.216282] acpiphp: Slot [16] registered
[ 0.217288] acpiphp: Slot [17] registered
[ 0.218300] acpiphp: Slot [18] registered
[ 0.219278] acpiphp: Slot [19] registered
[ 0.220311] acpiphp: Slot [20] registered
[ 0.221315] acpiphp: Slot [21] registered
[ 0.222308] acpiphp: Slot [22] registered
[ 0.223317] acpiphp: Slot [23] registered
[ 0.224289] acpiphp: Slot [24] registered
[ 0.225291] acpiphp: Slot [25] registered
[ 0.226294] acpiphp: Slot [26] registered
[ 0.227295] acpiphp: Slot [27] registered
[ 0.228306] acpiphp: Slot [28] registered
[ 0.229302] acpiphp: Slot [29] registered
[ 0.230319] acpiphp: Slot [30] registered
[ 0.231285] acpiphp: Slot [31] registered
[ 0.232267] PCI host bridge to bus 0000:00
[ 0.233016] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.234016] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.235016] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.236009] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
[ 0.237016] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.238141] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.240158] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.243136] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.243991] pci 0000:00:01.1: reg 0x20: [io 0xc400-0xc40f]
[ 0.244366] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.245015] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.246013] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.247014] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.249171] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.249196] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.249196] * this clock source is slow. Consider trying other clock sources
[ 0.250976] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.252244] pci 0000:00:02.0: [5853:0001] type 00 class 0xff8000
[ 0.252525] pci 0000:00:02.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.252692] pci 0000:00:02.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
[ 0.255154] pci 0000:00:03.0: [10ec:8139] type 00 class 0x020000
[ 0.255397] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc1ff]
[ 0.255566] pci 0000:00:03.0: reg 0x14: [mem 0xf1000000-0xf10000ff]
[ 0.258135] pci 0000:00:04.0: [10ec:8139] type 00 class 0x020000
[ 0.258376] pci 0000:00:04.0: reg 0x10: [io 0xc200-0xc2ff]
[ 0.258535] pci 0000:00:04.0: reg 0x14: [mem 0xf1000100-0xf10001ff]
[ 0.261153] pci 0000:00:05.0: [10ec:8139] type 00 class 0x020000
[ 0.261392] pci 0000:00:05.0: reg 0x10: [io 0xc300-0xc3ff]
[ 0.261561] pci 0000:00:05.0: reg 0x14: [mem 0xf1000200-0xf10002ff]
[ 0.265148] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.267212] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.269106] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.271295] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.283096] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 2/0x4 ignored.
[ 0.284012] ACPI: Unable to map lapic to logical cpu number
[ 0.285144] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 3/0x6 ignored.
[ 0.286012] ACPI: Unable to map lapic to logical cpu number
[ 0.287136] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 4/0x8 ignored.
[ 0.288006] ACPI: Unable to map lapic to logical cpu number
[ 0.289130] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 5/0xa ignored.
[ 0.290006] ACPI: Unable to map lapic to logical cpu number
[ 0.291123] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 6/0xc ignored.
[ 0.292006] ACPI: Unable to map lapic to logical cpu number
[ 0.293122] APIC: NR_CPUS/possible_cpus limit of 2 reached. Processor 7/0xe ignored.
[ 0.294012] ACPI: Unable to map lapic to logical cpu number
[ 0.295429] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.296266] xen:balloon: Initialising balloon driver
[ 0.297156] xen_balloon: Initialising balloon driver
[ 0.298510] vgaarb: loaded
[ 0.300030] SCSI subsystem initialized
[ 0.301097] libata version 3.00 loaded.
[ 0.301225] ACPI: bus type USB registered
[ 0.302127] usbcore: registered new interface driver usbfs
[ 0.303083] usbcore: registered new interface driver hub
[ 0.304072] usbcore: registered new device driver usb
[ 0.305214] PCI: Using ACPI for IRQ routing
[ 0.306017] PCI: pci_cache_line_size set to 64 bytes
[ 0.306389] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.306392] e820: reserve RAM buffer [mem 0xa0062000-0xa3ffffff]
[ 0.306876] NetLabel: Initializing
[ 0.307015] NetLabel: domain hash size = 128
[ 0.308012] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.309083] NetLabel: unlabeled traffic allowed by default
[ 0.310138] clocksource: Switched to clocksource xen
[ 0.342718] VFS: Disk quotas dquot_6.6.0
[ 0.346478] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.353038] hugetlbfs: disabling because there are no supported hugepage sizes
[ 0.358418] pnp: PnP ACPI init
[ 0.360917] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.367491] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.367692] system 00:01: [io 0x08a0-0x08a3] has been reserved
[ 0.371943] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
[ 0.376091] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.379396] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379420] xen: registering gsi 8 triggering 1 polarity 0
[ 0.379529] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.379570] xen: registering gsi 12 triggering 1 polarity 0
[ 0.379676] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.379700] xen: registering gsi 1 triggering 1 polarity 0
[ 0.379795] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.379818] xen: registering gsi 6 triggering 1 polarity 0
[ 0.379838] pnp 00:05: [dma 2]
[ 0.379922] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.379956] xen: registering gsi 4 triggering 1 polarity 0
[ 0.379957] Already setup the GSI :4
[ 0.381876] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.381938] xen: registering gsi 7 triggering 1 polarity 0
[ 0.382069] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.382203] system 00:08: [io 0x10c0-0x1141] has been reserved
[ 0.385923] system 00:08: [io 0xb044-0xb047] has been reserved
[ 0.389831] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397994] pnp: PnP ACPI: found 9 devices
[ 0.431760] PM-Timer failed consistency check (0xffffff) - aborting.
[ 0.436438] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.436441] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.436443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.436445] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
[ 0.436833] NET: Registered protocol family 2
[ 0.440573] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.445969] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.451306] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.455633] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.459106] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.462992] NET: Registered protocol family 1
[ 0.465630] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.469965] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.473905] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.477437] PCI: CLS 0 bytes, default 64
[ 0.477876] Trying to unpack rootfs image as initramfs...
[ 0.555092] Freeing initrd memory: 18380K
[ 0.563868] audit: initializing netlink subsys (disabled)
[ 0.570317] audit: type=2000 audit(1520871023.914:1): initialized
[ 0.578154] Initialise system trusted keyrings
[ 0.584121] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.589705] zbud: loaded
[ 0.592635] SELinux: Registering netfilter hooks
[ 1.013522] NET: Registered protocol family 38
[ 1.016102] Key type asymmetric registered
[ 1.019584] Asymmetric key parser 'x509' registered
[ 1.022554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.026943] io scheduler noop registered
[ 1.029170] io scheduler deadline registered
[ 1.031632] io scheduler cfq registered (default)
[ 1.035582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.039660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.044518] intel_idle: does not run on family 6 model 62
[ 1.044851] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.050219] ACPI: Power Button [PWRF]
[ 1.052899] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.056972] ACPI: Sleep Button [SLPF]
[ 1.059441] Warning: Processor Platform Limit not supported.
[ 1.059677] GHES: HEST is not enabled!
[ 1.063726] xen: registering gsi 24 triggering 0 polarity 1
[ 1.063786] xen: --> pirq=24 -> irq=24 (gsi=24)
[ 1.063952] xen-platform-pci 0000:00:02.0: Unable to set the evtchn callback err=-22
[ 1.069741] xen-platform-pci: probe of 0000:00:02.0 failed with error -22
[ 1.075236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.081720] hpet_acpi_add: no address or irqs in _CRS
[ 1.085960] Non-volatile memory driver v1.3
[ 1.089000] Linux agpgart interface v0.103
[ 1.092680] [drm] Initialized
[ 1.106974] brd: module loaded
[ 1.567054] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb669c0eb1, max_idle_ns: 440795279361 ns
[ 1.757322] loop: module loaded
[ 1.760711] ata_piix 0000:00:01.1: version 2.13
[ 1.764167] scsi host0: ata_piix
[ 1.767300] scsi host1: ata_piix
[ 1.770906] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc400 irq 14
[ 1.778642] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc408 irq 15
[ 1.784817] libphy: Fixed MDIO Bus: probed
[ 1.787732] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.791657] ehci-pci: EHCI PCI platform driver
[ 1.794892] ehci-platform: EHCI generic platform driver
[ 1.799101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.803011] ohci-pci: OHCI PCI platform driver
[ 1.806520] ohci-platform: OHCI generic platform driver
[ 1.809639] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.813517] usbcore: registered new interface driver usbserial
[ 1.817723] usbcore: registered new interface driver usbserial_generic
[ 1.821578] usbserial: USB Serial support registered for generic
[ 1.825280] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.831698] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.834581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.838635] mousedev: PS/2 mouse device common for all mice
[ 1.842920] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.846826] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram
[ 1.851185] device-mapper: uevent: version 1.0.3
[ 1.855060] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.855746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.867553] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.871957] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.876244] usbcore: registered new interface driver usbhid
[ 1.879810] usbhid: USB HID core driver
[ 1.882491] drop_monitor: Initializing network drop monitor service
[ 1.886398] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.889858] Initializing XFRM netlink socket
[ 1.892745] NET: Registered protocol family 10
[ 1.896235] mip6: Mobile IPv6
[ 1.898674] NET: Registered protocol family 17
[ 1.901677] mce: Unable to init device /dev/mcelog (rc: -16)
[ 1.905369] microcode: sig=0x306e4, pf=0x1, revision=0x428
[ 1.909594] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.916271] AVX version of gcm_enc/dec engaged.
[ 1.919850] AES CTR mode by8 optimization enabled
[ 1.948019] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.954466] ata1.00: 73400320 sectors, multi 16: LBA48
[ 1.959218] ata1.01: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.964419] ata1.01: 2097152 sectors, multi 16: LBA48
[ 1.971611] ata1.00: configured for MWDMA2
[ 1.980014] ata1.01: configured for MWDMA2
[ 1.983283] registered taskstats version 1
[ 1.986749] Loading compiled-in X.509 certificates
[ 1.988278] ata2.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.988279] ata2.00: 104857600 sectors, multi 16: LBA48
[ 1.988283] ata2.01: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 1.988284] ata2.01: 8388608 sectors, multi 16: LBA48
[ 1.990546] ata2.00: configured for MWDMA2
[ 1.995848] ata2.01: configured for MWDMA2
[ 2.009291] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK .2 PQ: 0 ANSI: 5
[ 2.030842] zswap: loaded using pool lzo/zbud
[ 2.054634] sd 0:0:0:0: [sda] 73400320 512-byte logical blocks: (37.6 GB/35.0 GiB)
[ 2.061370] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.062716] sd 0:0:0:0: [sda] Write Protect is off
[ 2.062718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.062760] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.065601] sda: sda1 sda2
[ 2.066671] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.087726] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK .2 PQ: 0 ANSI: 5
[ 2.116390] Key type big_key registered
[ 2.142816] Key type encrypted registered
[ 2.147006] ima: No TPM chip found, activating TPM-bypass!
[ 2.152816] rtc_cmos 00:02: setting system clock to 2018-03-12 16:10:25 UTC (1520871025)
[ 2.165000] sd 0:0:1:0: [sdb] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 2.172421] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.172810] scsi 1:0:0:0: Direct-Access ATA QEMU HARDDISK .2 PQ: 0 ANSI: 5
[ 2.186443] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.190452] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.190508] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.199006] sdb:
[ 2.201146] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.215089] sd 1:0:0:0: [sdc] 104857600 512-byte logical blocks: (53.7 GB/50.0 GiB)
[ 2.223120] sd 1:0:0:0: [sdc] Write Protect is off
[ 2.223273] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.223651] scsi 1:0:1:0: Direct-Access ATA QEMU HARDDISK .2 PQ: 0 ANSI: 5
[ 2.244435] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.244500] sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.262733] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 2.268948] sdc: sdc1
[ 2.268979] sd 1:0:1:0: [sdd] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB)
[ 2.269174] sd 1:0:1:0: [sdd] Write Protect is off
[ 2.269179] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.269232] sd 1:0:1:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.300786] sdd: sdd1
[ 2.303168] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 2.303869] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 2.313328] Freeing unused kernel memory: 2420K
[ 2.318093] Write protecting the kernel read-only data: 14336k
[ 2.329258] Freeing unused kernel memory: 1564K
[ 2.334208] Freeing unused kernel memory: 36K
[ 2.348068] random: crng init done
[ 2.407671] dracut: dracut-004-409.el6_8.2
[ 2.443259] dracut: rd_NO_LUKS: removing cryptoluks activation
[ 2.457148] dracut: rd_NO_LVM: removing LVM activation
[ 2.498823] udev: starting version 147
[ 2.504256] udevd (961): /proc/961/oom_adj is deprecated, please use /proc/961/oom_score_adj instead.
[ 2.575252] clocksource: Switched to clocksource tsc
[ 2.930285] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 3.056193] dracut: Starting plymouth daemon
[ 3.100942] dracut: rd_NO_DM: removing DM RAID activation
[ 3.123991] dracut: rd_NO_MD: removing MD RAID activation
[ 7.627294] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 7.667595] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.755374] dracut: Mounted root filesystem /dev/sda1
[ 7.928902] dracut: Loading SELinux policy
[ 8.159548] audit: type=1404 audit(1520871031.505:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 9.533697] SELinux: 65536 avtab hash slots, 309308 rules.
[ 9.658741] SELinux: 65536 avtab hash slots, 309308 rules.
[ 9.858193] SELinux: 9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
[ 9.858198] SELinux: 81 classes, 309308 rules
[ 9.869109] SELinux: Permission validate_trans in class security not defined in policy.
[ 9.876379] SELinux: Permission module_load in class system not defined in policy.
[ 9.883243] SELinux: Permission execmod in class dir not defined in policy.
[ 9.889512] SELinux: Permission execmod in class lnk_file not defined in policy.
[ 9.895747] SELinux: Permission execmod in class blk_file not defined in policy.
[ 9.902265] SELinux: Permission execmod in class sock_file not defined in policy.
[ 9.908678] SELinux: Permission execmod in class fifo_file not defined in policy.
[ 9.915007] SELinux: Class netlink_iscsi_socket not defined in policy.
[ 9.920431] SELinux: Class netlink_fib_lookup_socket not defined in policy.
[ 9.926317] SELinux: Class netlink_connector_socket not defined in policy.
[ 9.932058] SELinux: Class netlink_netfilter_socket not defined in policy.
[ 9.937821] SELinux: Class netlink_generic_socket not defined in policy.
[ 9.943445] SELinux: Class netlink_scsitransport_socket not defined in policy.
[ 9.949462] SELinux: Class netlink_rdma_socket not defined in policy.
[ 9.954836] SELinux: Class netlink_crypto_socket not defined in policy.
[ 9.960400] SELinux: Permission syslog in class capability2 not defined in policy.
[ 9.966554] SELinux: Permission wake_alarm in class capability2 not defined in policy.
[ 9.973121] SELinux: Permission block_suspend in class capability2 not defined in policy.
[ 9.980004] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 9.986462] SELinux: Permission attach_queue in class tun_socket not defined in policy.
[ 9.993072] SELinux: Class binder not defined in policy.
[ 9.997441] SELinux: Class cap_userns not defined in policy.
[ 10.002181] SELinux: Class cap2_userns not defined in policy.
[ 10.006731] SELinux: the above unknown classes and permissions will be allowed
[ 10.012627] SELinux: Completing initialization.
[ 10.012628] SELinux: Setting up existing superblocks.
[ 10.062918] audit: type=1403 audit(1520871033.408:3): policy loaded auid=4294967295 ses=4294967295
[ 10.089097] dracut:
[ 11.119788] dracut: Switching root
[ 14.967320] udev: starting version 147
[ 15.762194] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 15.997451] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 16.010897] xen: registering gsi 28 triggering 0 polarity 1
[ 16.011052] xen: --> pirq=28 -> irq=28 (gsi=28)
[ 16.028948] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000c39000, <MAC redacted>, IRQ 28
[ 16.050098] xen: registering gsi 32 triggering 0 polarity 1
[ 16.050177] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 16.066293] 8139cp 0000:00:04.0 eth1: RTL-8139C+ at 0xffffc90000c41100, <MAC redacted>, IRQ 32
[ 16.081314] xen: registering gsi 36 triggering 0 polarity 1
[ 16.081391] xen: --> pirq=36 -> irq=36 (gsi=36)
[ 16.105505] 8139cp 0000:00:05.0 eth2: RTL-8139C+ at 0xffffc90000c51200, <MAC redacted>, IRQ 36
[ 16.225809] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 16.688440] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 18.441863] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 18.635762] parport_pc 00:07: reported by Plug and Play ACPI
[ 18.640496] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.743346] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[ 18.749960] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[ 18.756332] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[ 22.733190] ppdev: user-space parallel port driver
[ 23.935913] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 23.990688] Bridge firewalling registered
[ 24.363450] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 24.368316] drbd: srcversion: 0904DF2CCF7283ACE07D07A
[ 24.372082] drbd: registered as block device major 147
[ 24.426811] Ebtables v2.0 registered
[ 24.871749] fuse init (API version 7.26)
[ 24.969317] pps_core: LinuxPPS API ver. 1 registered
[ 24.976804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 25.040235] PTP clock support registered
[ 25.333504] md: raid10 personality registered for level 10
[ 25.464028] raid6: sse2x1 gen() 2972 MB/s
[ 25.484024] raid6: sse2x1 xor() 4708 MB/s
[ 25.504024] raid6: sse2x2 gen() 5882 MB/s
[ 25.524027] raid6: sse2x2 xor() 5244 MB/s
[ 25.543020] raid6: sse2x4 gen() 8351 MB/s
[ 25.563021] raid6: sse2x4 xor() 6347 MB/s
[ 25.566486] raid6: using algorithm sse2x4 gen() 8351 MB/s
[ 25.570846] raid6: .... xor() 6347 MB/s, rmw enabled
[ 25.574794] raid6: using ssse3x2 recovery algorithm
[ 25.618504] async_tx: api initialized (async)
[ 25.707777] xor: automatically using best checksumming function avx
[ 25.760155] md: raid6 personality registered for level 6
[ 25.767541] md: raid5 personality registered for level 5
[ 25.774704] md: raid4 personality registered for level 4
[ 25.925387] tun: Universal TUN/TAP device driver, 1.6
[ 25.931889] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 26.095503] xen:xen_evtchn: Event-channel device installed
[ 26.447826] blktap_device_init: blktap device major 252
[ 26.454670] blktap_ring_init: blktap ring major: 242
[ 26.558641] xen_pciback: backend is vpci
[ 29.852900] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 30.814741] EXT4-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
[ 30.878069] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 30.902582] EXT4-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended
[ 30.926168] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 34.644952] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 35.095813] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 36.676471] 8139cp 0000:00:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 36.692702] xenbr0: port 1(eth0) entered blocking state
[ 36.697035] xenbr0: port 1(eth0) entered disabled state
[ 36.701596] device eth0 entered promiscuous mode
[ 36.826618] 8139cp 0000:00:04.0 eth1: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 36.835350] xenbr1: port 1(eth1) entered blocking state
[ 36.840708] xenbr1: port 1(eth1) entered disabled state
[ 36.845829] device eth1 entered promiscuous mode
[ 37.033156] 8139cp 0000:00:05.0 eth2: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 41.495752] audit: type=1400 audit(1520871064.841:4): avc: denied { create } for pid=5181 comm="brctl" name="forward_delay" scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file permissive=0
[ 41.528965] audit: type=1400 audit(1520871064.874:5): avc: denied { create } for pid=5182 comm="brctl" name="stp_state" scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file permissive=0
[ 41.556762] xenbr0: port 1(eth0) entered blocking state
[ 41.561184] xenbr0: port 1(eth0) entered forwarding state
[ 41.876575] audit: type=1400 audit(1520871065.222:6): avc: denied { create } for pid=5227 comm="brctl" name="forward_delay" scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file permissive=0
[ 41.907846] audit: type=1400 audit(1520871065.253:7): avc: denied { create } for pid=5228 comm="brctl" name="stp_state" scontext=system_u:system_r:brctl_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file permissive=0
[ 42.008284] xenbr1: port 1(eth1) entered blocking state
[ 42.015465] xenbr1: port 1(eth1) entered forwarding state
[ 46.966276] audit: type=1305 audit(1520871070.312:8): audit_pid=5301 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 199.244630] vif vif-2-0 myvif-emu: renamed from vif2.0
[ 199.320610] xenbr0: port 2(myvif-emu) entered blocking state
[ 199.323883] xenbr0: port 2(myvif-emu) entered disabled state
[ 199.327432] device myvif-emu entered promiscuous mode
[ 199.335814] IPv6: ADDRCONF(NETDEV_UP): myvif-emu: link is not ready
[ 199.857838] vif vif-2-0 myvif-emu: Guest Rx ready
[ 199.864316] IPv6: ADDRCONF(NETDEV_CHANGE): myvif-emu: link becomes ready
[ 199.872692] xenbr0: port 2(myvif-emu) entered blocking state
[ 199.880167] xenbr0: port 2(myvif-emu) entered forwarding state
[ 199.900497] xen-blkback: backend/vbd/2/768: using 1 queues, protocol 1 (x86_64-abi)
[ 229.998517] xenbr0: port 2(myvif-emu) entered disabled state
[ 230.016369] xenbr0: port 2(myvif-emu) entered disabled state
[ 230.022710] device myvif-emu left promiscuous mode
[ 230.028113] xenbr0: port 2(myvif-emu) entered disabled state
[-- Attachment #4: myguest --]
[-- Type: text/plain, Size: 503 bytes --]
type = 'hvm'
memory = 256
vcpus = 1
cpus = 'all,^0-0'
cpu_weight=256
name = 'myguest'
pae = 1
nx = 1
acpi = 1
viridian = 0
xen_platform_pci = 1
apic = 1
device_model_stubdomain_override = 1
boot = 'c'
sdl = 0
usb = 0
vnc = 0
nographic = 1
vga = "none"
vncpasswd = ''
serial = 'pty'
vif = ['vifname=myvif, mac=redacted, model=e1000, type=ioemu, ip=redacted, bridge=xenbr0']
disk = ['phy:/var/lib/ganeti/instance-disks/myguest:0,hda,w']
on_poweroff = 'destroy'
on_reboot = 'destroy'
on_crash = 'destroy'
[-- Attachment #5: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
prev parent reply other threads:[~2018-03-12 18:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 15:24 xen 4.10.0: stubdomain for HVM guest fails to start unless qdisk backend is used? Chris Brannon
2018-03-12 14:28 ` George Dunlap
2018-03-12 18:33 ` Chris Brannon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87efkpp2jn.fsf@prgmr.com \
--to=cmb@prgmr.com \
--cc=dunlapg@umich.edu \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.