From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Stephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@baylibre.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Jason Cooper <jason@lakedaemon.net>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, Nadav Haklai <nadavh@marvell.com>,
Kostya Porotchkin <kostap@marvell.com>,
Neta Zur Hershkovits <neta@marvell.com>,
Marcin Wojtas <mw@semihalf.com>, Omri Itach <omrii@marvell.com>,
Shadi Ammouri <shadi@marvell.com>
Subject: Re: [PATCH v3 8/9] arm64: dts: marvell: remove *-clock-output-names on cp110
Date: Tue, 20 Jun 2017 16:10:36 +0200 [thread overview]
Message-ID: <87efue4un7.fsf@free-electrons.com> (raw)
In-Reply-To: <99492ad5e3026e12a57623bdcf0cc33d4935eb66.1496328934.git-series.gregory.clement@free-electrons.com> (Gregory CLEMENT's message of "Thu, 1 Jun 2017 16:55:41 +0200")
Hi,
On jeu., juin 01 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> The *-clock-output-names of the cp110-system-controller0 node are not
> used anymore, so remove them.
>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 13 +-------------
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 13 +-------------
> 2 files changed, 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index ac8df5201cd6..a0f57a8e5dcb 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -101,19 +101,6 @@
> "syscon";
> reg = <0x440000 0x1000>;
> #clock-cells = <2>;
> - core-clock-output-names =
> - "cpm-apll", "cpm-ppv2-core", "cpm-eip",
> - "cpm-core", "cpm-nand-core";
> - gate-clock-output-names =
> - "cpm-audio", "cpm-communit", "cpm-nand",
> - "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
> - "cpm-mg-core", "cpm-xor1", "cpm-xor0",
> - "cpm-gop-dp", "none", "cpm-pcie_x10",
> - "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
> - "cpm-sata", "cpm-sata-usb", "cpm-main",
> - "cpm-sd-mmc-gop", "none", "none",
> - "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
> - "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
> };
>
> cpm_rtc: rtc@284000 {
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 7740a75a8230..9584bc8d8b3f 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -108,19 +108,6 @@
> "syscon";
> reg = <0x440000 0x1000>;
> #clock-cells = <2>;
> - core-clock-output-names =
> - "cps-apll", "cps-ppv2-core", "cps-eip",
> - "cps-core", "cps-nand-core";
> - gate-clock-output-names =
> - "cps-audio", "cps-communit", "cps-nand",
> - "cps-ppv2", "cps-sdio", "cps-mg-domain",
> - "cps-mg-core", "cps-xor1", "cps-xor0",
> - "cps-gop-dp", "none", "cps-pcie_x10",
> - "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
> - "cps-sata", "cps-sata-usb", "cps-main",
> - "cps-sd-mmc-gop", "none", "none",
> - "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
> - "cps-usb3dev", "cps-eip150", "cps-eip197";
> };
>
> cps_sata0: sata@540000 {
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 8/9] arm64: dts: marvell: remove *-clock-output-names on cp110
Date: Tue, 20 Jun 2017 16:10:36 +0200 [thread overview]
Message-ID: <87efue4un7.fsf@free-electrons.com> (raw)
In-Reply-To: <99492ad5e3026e12a57623bdcf0cc33d4935eb66.1496328934.git-series.gregory.clement@free-electrons.com> (Gregory CLEMENT's message of "Thu, 1 Jun 2017 16:55:41 +0200")
Hi,
On jeu., juin 01 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> The *-clock-output-names of the cp110-system-controller0 node are not
> used anymore, so remove them.
>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 13 +-------------
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 13 +-------------
> 2 files changed, 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index ac8df5201cd6..a0f57a8e5dcb 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -101,19 +101,6 @@
> "syscon";
> reg = <0x440000 0x1000>;
> #clock-cells = <2>;
> - core-clock-output-names =
> - "cpm-apll", "cpm-ppv2-core", "cpm-eip",
> - "cpm-core", "cpm-nand-core";
> - gate-clock-output-names =
> - "cpm-audio", "cpm-communit", "cpm-nand",
> - "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
> - "cpm-mg-core", "cpm-xor1", "cpm-xor0",
> - "cpm-gop-dp", "none", "cpm-pcie_x10",
> - "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
> - "cpm-sata", "cpm-sata-usb", "cpm-main",
> - "cpm-sd-mmc-gop", "none", "none",
> - "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
> - "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
> };
>
> cpm_rtc: rtc at 284000 {
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 7740a75a8230..9584bc8d8b3f 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -108,19 +108,6 @@
> "syscon";
> reg = <0x440000 0x1000>;
> #clock-cells = <2>;
> - core-clock-output-names =
> - "cps-apll", "cps-ppv2-core", "cps-eip",
> - "cps-core", "cps-nand-core";
> - gate-clock-output-names =
> - "cps-audio", "cps-communit", "cps-nand",
> - "cps-ppv2", "cps-sdio", "cps-mg-domain",
> - "cps-mg-core", "cps-xor1", "cps-xor0",
> - "cps-gop-dp", "none", "cps-pcie_x10",
> - "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
> - "cps-sata", "cps-sata-usb", "cps-main",
> - "cps-sd-mmc-gop", "none", "none",
> - "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
> - "cps-usb3dev", "cps-eip150", "cps-eip197";
> };
>
> cps_sata0: sata at 540000 {
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-06-20 14:10 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 14:55 [PATCH v3 0/9] Improve cp110 clk support on Marvell Armada 7K/8K Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 1/9] clk: mvebu: cp110: make failure labels more meaningful Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 2/9] dt-bindings: cp110: do not depend anymore of the *-clock-output-names Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 3/9] clk: mvebu: " Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 4/9] dt-bindings: cp110: introduce a new binding Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 5/9] clk: mvebu: " Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 6/9] dt-bindings: cp110: add sdio clock to cp-110 system controller Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 7/9] clk: mvebu: " Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 8/9] arm64: dts: marvell: remove *-clock-output-names on cp110 Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-20 14:10 ` Gregory CLEMENT [this message]
2017-06-20 14:10 ` Gregory CLEMENT
2017-06-01 14:55 ` [PATCH v3 9/9] arm64: dts: marvell: use new binding for the system controller " Gregory CLEMENT
2017-06-01 14:55 ` Gregory CLEMENT
2017-06-20 14:23 ` Gregory CLEMENT
2017-06-20 14:23 ` Gregory CLEMENT
2017-06-12 15:43 ` [PATCH v3 0/9] Improve cp110 clk support on Marvell Armada 7K/8K Gregory CLEMENT
2017-06-12 15:43 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87efue4un7.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=kostap@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=neta@marvell.com \
--cc=omrii@marvell.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=shadi@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.