From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Wed, 27 Jul 2016 16:43:22 +0200 Subject: [PATCH 1/3 v2] arm: mvebu: Add SPI1 pinctrl defines for Armada XP In-Reply-To: <20160713094837.25956-1-sr@denx.de> (Stefan Roese's message of "Wed, 13 Jul 2016 11:48:35 +0200") References: <20160713094837.25956-1-sr@denx.de> Message-ID: <87eg6fnnud.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Stefan, On mer., juil. 13 2016, Stefan Roese wrote: > This patch defines and uses common Armada XP pinctrl settings in > armada-xp.dtsi for the SPI1 interface (MPP13,14,16,17). > > Signed-off-by: Stefan Roese > Reviewed-by: Thomas Petazzoni > Cc: Gregory CLEMENT Applied on mvebu/dt-4.9 Thanks, Gregory > --- > v2: > - Added to this dts SPI node move patchset. No functional change. > > arch/arm/boot/dts/armada-xp.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi > index 553349c..4033790 100644 > --- a/arch/arm/boot/dts/armada-xp.dtsi > +++ b/arch/arm/boot/dts/armada-xp.dtsi > @@ -94,6 +94,8 @@ > spi1: spi at 10680 { > compatible = "marvell,armada-xp-spi", > "marvell,orion-spi"; > + pinctrl-0 = <&spi1_pins>; > + pinctrl-names = "default"; > }; > > > @@ -362,6 +364,12 @@ > marvell,function = "spi0"; > }; > > + spi1_pins: spi1-pins { > + marvell,pins = "mpp13", "mpp14", > + "mpp16", "mpp17"; > + marvell,function = "spi1"; > + }; > + > uart2_pins: uart2-pins { > marvell,pins = "mpp42", "mpp43"; > marvell,function = "uart2"; > -- > 2.9.1 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com