Re: [PATCH 3/6] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Théo Lebrun <theo.lebrun@bootlin.com> writes:

> Declare the temperature sensor on I2C bus 2. Its label is the schematics
> identifier.
>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Thanks,

Gregory

> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: Andi Shyti <andi.shyti@kernel.org>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
> ---
>  arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> index 6898b2d8267dfadeea511a84d1df3f70744f17bb..9fc1a1b0a81bec5ec52db17231104c86020d7e3b 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> @@ -21,3 +21,11 @@ memory@0 {
>  		      <0x8 0x02000000 0x0 0x7E000000>;
>  	};
>  };
> +
> +&i2c2 {
> +	temperature-sensor@48 {
> +		compatible = "ti,tmp112";
> +		reg = <0x48>;
> +		label = "U60";
> +	};
> +};
>
> -- 
> 2.50.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com