All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: Varadarajan Narayanan <quic_varada@quicinc.com>,
	ni@konsulko.com, caleb.connolly@linaro.org,
	quic_varada@quicinc.com, neil.armstrong@linaro.org,
	u-boot@lists.denx.de, Marek Vasut <marex@denx.de>
Subject: Re: [PATCH v2] usb: dwc3: core: Fix timeout check
Date: Thu, 16 Jan 2025 10:31:21 +0100	[thread overview]
Message-ID: <87frlj85qu.fsf@baylibre.com> (raw)
In-Reply-To: <20250115062044.3834433-1-quic_varada@quicinc.com>

Hi Varadarajan,

Thank you for the patch.

On mer., janv. 15, 2025 at 11:50, Varadarajan Narayanan <quic_varada@quicinc.com> wrote:

> dwc3_core_init loops 'timeout' times to check if the IP block is out
> of reset using 'while (timeout--)'. If there is some issue and
> the block doesn't come out of reset, the loop will run till
> 'timeout' becomes zero and the post decrement operator would set
> timeout to 0xffffffff. Though the IP block is not out reset, the
> subsequent if check 'if !timeout' would fail as timeout is not
> equal to zero and the function proceeds with the initialization.
>
> Use poll API instead to resolve this.
>
> Tested-By: Varadarajan Narayanan <quic_varada@quicinc.com>

s/Tested-By/Tested-by

See ./scripts/checkpatch.pl:

λ ~/work/upstream/src/u-boot/ varadarajan/dwc3-timeout ./scripts/checkpatch.pl --u-boot --git HEAD^..HEAD
WARNING: 'Tested-by:' is the preferred signature form
#16:
Tested-By: Varadarajan Narayanan <quic_varada@quicinc.com>

total: 0 errors, 1 warnings, 0 checks, 33 lines checked

> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>

I think Marek can fix-up that when he applies, but if you send a v3 to
correct this, feel free to add:

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

Thanks
Mattijs

> ---
> v2: * Use poll API and remove the timeout variable based loop as
>       suggested by 'Marek Vasut'
>     * Drop 'Reviewed-by: Neil Armstrong' as the patch has taken
>       a very different shape
> ---
>  drivers/usb/dwc3/core.c | 14 +++++---------
>  1 file changed, 5 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index a35b8c2f64..847fa1f82c 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -23,6 +23,7 @@
>  #include <linux/delay.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/err.h>
> +#include <linux/iopoll.h>
>  #include <linux/ioport.h>
>  #include <dm.h>
>  #include <generic-phy.h>
> @@ -587,7 +588,6 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
>   */
>  static int dwc3_core_init(struct dwc3 *dwc)
>  {
> -	unsigned long		timeout;
>  	u32			hwparams4 = dwc->hwparams.hwparams4;
>  	u32			reg;
>  	int			ret;
> @@ -610,15 +610,11 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  	}
>  
>  	/* issue device SoftReset too */
> -	timeout = 5000;
>  	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
> -	while (timeout--) {
> -		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
> -		if (!(reg & DWC3_DCTL_CSFTRST))
> -			break;
> -	};
> -
> -	if (!timeout) {
> +	ret = read_poll_timeout(dwc3_readl, reg,
> +				!(reg & DWC3_DCTL_CSFTRST),
> +				1, 5000, dwc->regs, DWC3_DCTL);
> +	if (ret) {
>  		dev_err(dwc->dev, "Reset Timed Out\n");
>  		ret = -ETIMEDOUT;
>  		goto err0;
> -- 
> 2.34.1

  reply	other threads:[~2025-01-16  9:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-15  6:20 [PATCH v2] usb: dwc3: core: Fix timeout check Varadarajan Narayanan
2025-01-16  9:31 ` Mattijs Korpershoek [this message]
2025-01-20 23:58   ` Marek Vasut
2025-01-17  7:03 ` Caleb Connolly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87frlj85qu.fsf@baylibre.com \
    --to=mkorpershoek@baylibre.com \
    --cc=caleb.connolly@linaro.org \
    --cc=marex@denx.de \
    --cc=neil.armstrong@linaro.org \
    --cc=ni@konsulko.com \
    --cc=quic_varada@quicinc.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.