From: =?unknown-8bit?q?Bj=C3=B8rn?= Mork <bjorn@mork.no>
To: ofono@ofono.org
Subject: Re: Huawei 3131 with idVendor=12d1, idProduct=14fe
Date: Tue, 12 Jan 2016 20:08:06 +0100 [thread overview]
Message-ID: <87fuy2vco9.fsf@nemi.mork.no> (raw)
In-Reply-To: <CADnUhn2vxkMDZrBkTL98BryyOmzPUM=ivceK1ekcV+uLHgKZcQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1027 bytes --]
matti kaasinen <matti.kaasinen@gmail.com> writes:
> 2016-01-12 18:30 GMT+02:00 Denis Kenzior <denkenz@gmail.com>:
>
>> Please note, that there are two different versions of the Huawei cards
>> supported by oFono. One uses the "gobi" driver (these are Qualcomm
>> chips). While the more traditional one uses PPP & the "huawei" driver.
>
>
> I suppose I should edit setup_gobi() and vendor_list() as before in case
> it's "gobi"?
It's not "gobi". At least not in the firmware cfg you are using. The
255/2/22 class/subclass/protocol indicates an NCM function with an AT
command channel transported via SEND_ENCAPSULATED_COMMAND and
GET_ENCAPSULATED_RESPONSE. The huawei_cdc_ncm driver will handle this,
exporting the AT command channel as a /dev/cdc-wdmX device.
The NCM network interface is managed via Huawei AT commands like e.g
AT^NDISDUP, either over the /dev/cdc-wdmX device or one of the serial
functions. Don't know if ofono supports that? If not, then I guess PPP
is your option.
Bjørn
next prev parent reply other threads:[~2016-01-12 19:08 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CADnUhn1efXRB7fZGkSfsToHH5gxd-tK4OxJxF9MhP334P1Pvcw@mail.gmail.com>
2016-01-11 15:02 ` Huawei 3131 with idVendor=12d1, idProduct=14fe matti kaasinen
2016-01-11 17:18 ` Denis Kenzior
2016-01-11 17:52 ` matti kaasinen
2016-01-12 8:38 ` matti kaasinen
2016-01-12 8:47 ` matti kaasinen
2016-01-12 9:40 ` matti kaasinen
2016-01-12 10:04 ` matti kaasinen
2016-01-12 16:30 ` Denis Kenzior
2016-01-12 16:46 ` matti kaasinen
2016-01-12 16:52 ` Denis Kenzior
2016-01-12 16:56 ` matti kaasinen
2016-01-12 17:20 ` Denis Kenzior
2016-01-13 10:40 ` matti kaasinen
2016-01-13 16:04 ` Denis Kenzior
2016-01-14 10:19 ` matti kaasinen
2016-01-14 15:32 ` Denis Kenzior
2016-01-14 15:53 ` matti kaasinen
2016-01-14 15:55 ` Denis Kenzior
2016-01-15 10:14 ` matti kaasinen
2016-01-20 14:47 ` matti kaasinen
2016-01-20 15:25 ` =?unknown-8bit?q?Bj=C3=B8rn?= Mork
2016-01-20 17:20 ` matti kaasinen
2016-01-21 8:05 ` matti kaasinen
2016-01-23 20:32 ` CedrIc Jehasse
2016-02-24 14:49 ` matti kaasinen
2016-01-21 12:56 ` matti kaasinen
2016-01-12 19:08 ` =?unknown-8bit?q?Bj=C3=B8rn?= Mork [this message]
2016-01-13 16:08 ` Denis Kenzior
2015-12-30 10:31 matti kaasinen
2015-12-31 8:39 ` matti kaasinen
2016-01-04 16:18 ` Denis Kenzior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fuy2vco9.fsf@nemi.mork.no \
--to=bjorn@mork.no \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.