* How to re-run configure after changing Makefile.am
@ 2014-03-13 2:54 Norman Cheung
2014-03-13 14:48 ` Otavio Salvador
0 siblings, 1 reply; 5+ messages in thread
From: Norman Cheung @ 2014-03-13 2:54 UTC (permalink / raw)
To: meta-freescale
Hello,
I wonder what bitbake commmand is used in Yocto to re-run configure?
I have modified the gstreamer core elements Makefile.am, and updated a
source file.
bitbake -f -c compile gstreamer doesn't seem to re-configure the Makefile
Thanks,
Norman
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: How to re-run configure after changing Makefile.am
2014-03-13 2:54 How to re-run configure after changing Makefile.am Norman Cheung
@ 2014-03-13 14:48 ` Otavio Salvador
2014-03-13 14:54 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: Otavio Salvador @ 2014-03-13 14:48 UTC (permalink / raw)
To: br jer; +Cc: meta-freescale@yoctoproject.org
On Wed, Mar 12, 2014 at 11:54 PM, Norman Cheung <brjerome.1@gmail.com> wrote:
> Hello,
>
> I wonder what bitbake commmand is used in Yocto to re-run configure?
>
> I have modified the gstreamer core elements Makefile.am, and updated a
> source file.
>
> bitbake -f -c compile gstreamer doesn't seem to re-configure the Makefile
bitbake -f -c configure gstreamer
or you can use devshell for this kind of 'hack'.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: How to re-run configure after changing Makefile.am
2014-03-13 14:48 ` Otavio Salvador
@ 2014-03-13 14:54 ` Gary Thomas
2014-03-13 14:57 ` Otavio Salvador
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2014-03-13 14:54 UTC (permalink / raw)
To: meta-freescale
On 2014-03-13 08:48, Otavio Salvador wrote:
> On Wed, Mar 12, 2014 at 11:54 PM, Norman Cheung <brjerome.1@gmail.com> wrote:
>> Hello,
>>
>> I wonder what bitbake commmand is used in Yocto to re-run configure?
>>
>> I have modified the gstreamer core elements Makefile.am, and updated a
>> source file.
>>
>> bitbake -f -c compile gstreamer doesn't seem to re-configure the Makefile
>
> bitbake -f -c configure gstreamer
Probably better to do
bitbake gstreamer -C configure
which will restart the whole recipe at the configure step.
If you use -c (lower case), you only get the configure step and
you then have to force a compile to complete the build.
>
> or you can use devshell for this kind of 'hack'.
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: How to re-run configure after changing Makefile.am
2014-03-13 14:54 ` Gary Thomas
@ 2014-03-13 14:57 ` Otavio Salvador
2014-03-13 14:59 ` Mario Domenech Goulart
0 siblings, 1 reply; 5+ messages in thread
From: Otavio Salvador @ 2014-03-13 14:57 UTC (permalink / raw)
To: Gary Thomas, Mario Goulart; +Cc: meta-freescale@yoctoproject.org
Hello Gary,
On Thu, Mar 13, 2014 at 11:54 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 2014-03-13 08:48, Otavio Salvador wrote:
>> On Wed, Mar 12, 2014 at 11:54 PM, Norman Cheung <brjerome.1@gmail.com> wrote:
>>> Hello,
>>>
>>> I wonder what bitbake commmand is used in Yocto to re-run configure?
>>>
>>> I have modified the gstreamer core elements Makefile.am, and updated a
>>> source file.
>>>
>>> bitbake -f -c compile gstreamer doesn't seem to re-configure the Makefile
>>
>> bitbake -f -c configure gstreamer
>
> Probably better to do
> bitbake gstreamer -C configure
> which will restart the whole recipe at the configure step.
>
> If you use -c (lower case), you only get the configure step and
> you then have to force a compile to complete the build.
I didn't know this 'trick'; nice one :-) Mario, this is useful for
your current debug ;-)
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: How to re-run configure after changing Makefile.am
2014-03-13 14:57 ` Otavio Salvador
@ 2014-03-13 14:59 ` Mario Domenech Goulart
0 siblings, 0 replies; 5+ messages in thread
From: Mario Domenech Goulart @ 2014-03-13 14:59 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org, Gary Thomas
On Thu, 13 Mar 2014 11:57:04 -0300 Otavio Salvador <otavio@ossystems.com.br> wrote:
> On Thu, Mar 13, 2014 at 11:54 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>> On 2014-03-13 08:48, Otavio Salvador wrote:
>>> On Wed, Mar 12, 2014 at 11:54 PM, Norman Cheung <brjerome.1@gmail.com> wrote:
>>>> Hello,
>>>>
>>>> I wonder what bitbake commmand is used in Yocto to re-run configure?
>>>>
>>>> I have modified the gstreamer core elements Makefile.am, and updated a
>>>> source file.
>>>>
>>>> bitbake -f -c compile gstreamer doesn't seem to re-configure the Makefile
>>>
>>> bitbake -f -c configure gstreamer
>>
>> Probably better to do
>> bitbake gstreamer -C configure
>> which will restart the whole recipe at the configure step.
>>
>> If you use -c (lower case), you only get the configure step and
>> you then have to force a compile to complete the build.
>
> I didn't know this 'trick'; nice one :-) Mario, this is useful for
> your current debug ;-)
Indeed! Thanks for the tip, Gary.
Best wishes.
Mario
--
http://www.ossystems.com.br
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-03-13 14:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-13 2:54 How to re-run configure after changing Makefile.am Norman Cheung
2014-03-13 14:48 ` Otavio Salvador
2014-03-13 14:54 ` Gary Thomas
2014-03-13 14:57 ` Otavio Salvador
2014-03-13 14:59 ` Mario Domenech Goulart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.