All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
To: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>
Cc: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
	dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
	grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
	spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org
Subject: Re: [PATCH v2 00/12] tnetv107x ssp driver stack
Date: Thu, 21 Oct 2010 12:09:43 -0700	[thread overview]
Message-ID: <87fwvzuzuw.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1287429922-18870-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> (Cyril Chemparathy's message of "Mon, 18 Oct 2010 15:25:10 -0400")

Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org> writes:

> TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port
> device.  It has a built-in programmable execution engine that can be programmed
> to operate as almost any serial bus (I2C, SPI, EasyScale, and others).

Hi Cyril,

Can you do one more posting, including the acks from the subsystem
maintainers so far, and posting also to LKML and
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XZu6nac5fYnt@public.gmane.org

Also the backlight driver needs a review/ack from Richard Purdie (search
for drivers/video/backlight in MAINTAINERS).

With acks from all the subsystem maintainers, I think it makes sense to
merge all of these together via the davinci tree.   At the moment, I'm
not sure who the final authority on the drivers/misc stuff is, but I
will ask in response to your updated posting.

Thanks,

Kevin


> This patch series implements a driver stack that looks like the following:
>
>                              +--------+
>                              | eeprom | . . .
>                              +--------+
>    +-----------+             +--------------+ +---------+
>    | regulator | . . .       |   i2c-gpio   | | 1-wire  | . . .
>    +-----------+             +--------------+ +---------+
>    +----------------------+  +--------------------------------+
>    |       ssp-spi        |  |           ssp-gpio             |
>    +----------------------+  +--------------------------------+
>    +----------------------------------------------------------+
>    |                            ssp                           |
>    +----------------------------------------------------------+
>
>
> Changes between v1 and v2 of this series:
>
>   - Replaced open()/close() semantics with dynamic platform_device
>     registration on SSP probe.
>
>   - Removed user-land interface to regulator registers
>
>   - More sensible regulator constraints
>
>   - Other minor cleanups
>
>
> Cyril Chemparathy (12):
>   misc: add driver for sequencer serial port
>   davinci: add tnetv107x ssp platform device
>   davinci: add ssp config for tnetv107x evm board
>   spi: add ti-ssp spi master driver
>   davinci: add spi devices on tnetv107x evm
>   regulator: add driver for tps6524x regulator
>   davinci: add tnetv107x evm regulators
>   gpio: add ti-ssp virtual gpio driver
>   davinci: add tnetv107x evm ti-ssp gpio device
>   backlight: add support for tps6116x controller
>   davinci: add tnetv107x evm backlight device
>   davinci: add tnetv107x evm i2c eeprom device
>
>  arch/arm/mach-davinci/board-tnetv107x-evm.c    |  199 +++++++
>  arch/arm/mach-davinci/devices-tnetv107x.c      |   25 +
>  arch/arm/mach-davinci/include/mach/ti_ssp.h    |   99 ++++
>  arch/arm/mach-davinci/include/mach/tnetv107x.h |    2 +
>  arch/arm/mach-davinci/tnetv107x.c              |    2 +-
>  drivers/gpio/Kconfig                           |   10 +
>  drivers/gpio/Makefile                          |    1 +
>  drivers/gpio/ti-ssp-gpio.c                     |  200 +++++++
>  drivers/misc/Kconfig                           |   11 +
>  drivers/misc/Makefile                          |    1 +
>  drivers/misc/ti_ssp.c                          |  436 +++++++++++++++
>  drivers/regulator/Kconfig                      |   10 +
>  drivers/regulator/Makefile                     |    1 +
>  drivers/regulator/tps6524x-regulator.c         |  692 ++++++++++++++++++++++++
>  drivers/spi/Kconfig                            |    6 +
>  drivers/spi/Makefile                           |    1 +
>  drivers/spi/spi_ti_ssp.c                       |  397 ++++++++++++++
>  drivers/video/backlight/Kconfig                |    7 +
>  drivers/video/backlight/Makefile               |    2 +-
>  drivers/video/backlight/tps6116x.c             |  340 ++++++++++++
>  20 files changed, 2440 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/mach-davinci/include/mach/ti_ssp.h
>  create mode 100644 drivers/gpio/ti-ssp-gpio.c
>  create mode 100644 drivers/misc/ti_ssp.c
>  create mode 100644 drivers/regulator/tps6524x-regulator.c
>  create mode 100644 drivers/spi/spi_ti_ssp.c
>  create mode 100644 drivers/video/backlight/tps6116x.c
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

      parent reply	other threads:[~2010-10-21 19:09 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-18 19:25 [PATCH v2 00/12] tnetv107x ssp driver stack Cyril Chemparathy
     [not found] ` <1287429922-18870-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-18 19:25   ` [PATCH v2 01/12] misc: add driver for sequencer serial port Cyril Chemparathy
     [not found]     ` <1287429922-18870-2-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-20 15:22       ` Grant Likely
2010-10-18 19:25   ` [PATCH v2 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy
     [not found]     ` <1287429922-18870-5-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-20 15:32       ` Grant Likely
2010-10-18 19:25   ` [PATCH v2 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy
     [not found]     ` <1287429922-18870-7-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-19  0:22       ` Mark Brown
2010-10-18 19:25   ` [PATCH v2 07/12] davinci: add tnetv107x evm regulators Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 08/12] gpio: add ti-ssp virtual gpio driver Cyril Chemparathy
     [not found]     ` <1287429922-18870-9-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2010-10-20 15:23       ` Grant Likely
2010-10-21 22:41       ` David Brownell
2010-10-21 23:40         ` Cyril Chemparathy
     [not found]           ` <4CC0CF7C.1030908-l0cyMroinI0@public.gmane.org>
2010-10-22  0:00             ` David Brownell
2010-10-18 19:25   ` [PATCH v2 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 10/12] backlight: add support for tps6116x controller Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2010-10-18 19:25   ` [PATCH v2 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
2010-10-21 19:09   ` Kevin Hilman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87fwvzuzuw.fsf@deeprootsystems.com \
    --to=khilman-1d3hcaltpluheniveurvkkeocmrvltnr@public.gmane.org \
    --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
    --cc=cyril-l0cyMroinI0@public.gmane.org \
    --cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
    --cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
    --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.