Re: [PATCH] OMAP3: PM: Update voltage levels for OPP1/2 on VDD1/2

[Kevin Hilman <khilman@deeprootsystems.com>]

"Nayak, Rajendra" <rnayak@ti.com> writes:

> This patch updates the voltage levels for VDD1 OPP1/2 and
> VDD2 OPP1/2 according to the latest operating condition
> addendum for 3430.
>
> The new voltage levels at various OPP's for VDD1/2 are as below
>
> VDD1 OPP1 0.975v
> VDD1 OPP2 1.050v
> VDD1 OPP3 1.200v
> VDD1 OPP4 1.270v
> VDD1 OPP5 1.350v
>
> VDD2 OPP1 0.975v
> VDD2 OPP2 1.050v
> VDD2 OPP3 1.150v
>
> The patch applies on the latest pm head and is validated on 3430SDP.
>

This didn't apply to latest PM branch due to changes in the regbits
header.  I manually fixed this up and applied to PM branch.

Thanks,

Kevin

> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> ---
>  arch/arm/mach-omap2/omap3-opp.h        |   12 ++++++------
>  arch/arm/mach-omap2/prm-regbits-34xx.h |    8 ++++----
>  2 files changed, 10 insertions(+), 10 deletions(-)
>
> Index: linux-omap-2.6/arch/arm/mach-omap2/omap3-opp.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/omap3-opp.h	2009-02-13 09:28:45.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/omap3-opp.h	2009-02-13 09:37:35.767125634 +0530
> @@ -24,9 +24,9 @@
>  static struct omap_opp omap3_mpu_rate_table[] = {
>  	{0, 0, 0},
>  	/*OPP1*/
> -	{S125M, VDD1_OPP1, 0x18},
> +	{S125M, VDD1_OPP1, 0x1E},
>  	/*OPP2*/
> -	{S250M, VDD1_OPP2, 0x20},
> +	{S250M, VDD1_OPP2, 0x24},
>  	/*OPP3*/
>  	{S500M, VDD1_OPP3, 0x30},
>  	/*OPP4*/
> @@ -38,9 +38,9 @@ static struct omap_opp omap3_mpu_rate_ta
>  static struct omap_opp omap3_l3_rate_table[] = {
>  	{0, 0, 0},
>  	/*OPP1*/
> -	{0, VDD2_OPP1, 0x18},
> +	{0, VDD2_OPP1, 0x1E},
>  	/*OPP2*/
> -	{S83M, VDD2_OPP2, 0x20},
> +	{S83M, VDD2_OPP2, 0x24},
>  	/*OPP3*/
>  	{S166M, VDD2_OPP3, 0x2C},
>  };
> @@ -48,9 +48,9 @@ static struct omap_opp omap3_l3_rate_tab
>  static struct omap_opp omap3_dsp_rate_table[] = {
>  	{0, 0, 0},
>  	/*OPP1*/
> -	{S90M, VDD1_OPP1, 0x18},
> +	{S90M, VDD1_OPP1, 0x1E},
>  	/*OPP2*/
> -	{S180M, VDD1_OPP2, 0x20},
> +	{S180M, VDD1_OPP2, 0x24},
>  	/*OPP3*/
>  	{S360M, VDD1_OPP3, 0x30},
>  	/*OPP4*/
> Index: linux-omap-2.6/arch/arm/mach-omap2/prm-regbits-34xx.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/prm-regbits-34xx.h	2009-02-13 09:26:16.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/prm-regbits-34xx.h	2009-02-13 10:12:07.005364895 +0530
> @@ -464,14 +464,14 @@
>  
>  /* PRM_VC_CMD_VAL_0 specific bits */
>  #define OMAP3430_VC_CMD_VAL0_ON				(0x3 << 4)
> -#define OMAP3430_VC_CMD_VAL0_ONLP			(0x3 << 3)
> -#define OMAP3430_VC_CMD_VAL0_RET			(0x3 << 3)
> +#define OMAP3430_VC_CMD_VAL0_ONLP			(0xF << 1)
> +#define OMAP3430_VC_CMD_VAL0_RET			(0xF << 1)
>  #define OMAP3430_VC_CMD_VAL0_OFF			(0x3 << 4)
>  
>  /* PRM_VC_CMD_VAL_1 specific bits */
>  #define OMAP3430_VC_CMD_VAL1_ON				(0xB << 2)
> -#define OMAP3430_VC_CMD_VAL1_ONLP			(0x3 << 3)
> -#define OMAP3430_VC_CMD_VAL1_RET			(0x3 << 3)
> +#define OMAP3430_VC_CMD_VAL1_ONLP			(0xF << 1)
> +#define OMAP3430_VC_CMD_VAL1_RET			(0xF << 1)
>  #define OMAP3430_VC_CMD_VAL1_OFF			(0xB << 2)
>  
>  /* PRM_VC_CH_CONF */--