From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 9/9] drm/i915: Split intel_enable_ddi() into DP and HDMI variants
Date: Wed, 11 Oct 2017 23:06:07 +0300 [thread overview]
Message-ID: <87h8v5o3f4.fsf@intel.com> (raw)
In-Reply-To: <20171010121207.570-10-ville.syrjala@linux.intel.com>
On Tue, 10 Oct 2017, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Untangle intel_enable_ddi() by splitting it into DP and HDMI specific
> variants.
>
> v2: Keep using intel_ddi_get_encoder_port() for now
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 86 +++++++++++++++++++++++-----------------
> 1 file changed, 49 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 49cf8d9d2bc1..18bf06c7e43f 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2369,45 +2369,57 @@ void intel_ddi_fdi_post_disable(struct intel_encoder *encoder,
> I915_WRITE(FDI_RX_CTL(PIPE_A), val);
> }
>
> -static void intel_enable_ddi(struct intel_encoder *intel_encoder,
> - const struct intel_crtc_state *pipe_config,
> +static void intel_enable_ddi_dp(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state,
> + const struct drm_connector_state *conn_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> + enum port port = intel_ddi_get_encoder_port(encoder);
> +
> + if (port == PORT_A && INTEL_GEN(dev_priv) < 9)
> + intel_dp_stop_link_train(intel_dp);
> +
> + intel_edp_backlight_on(crtc_state, conn_state);
> + intel_psr_enable(intel_dp, crtc_state);
This is broken without edp check.
BR,
Jani.
> + intel_edp_drrs_enable(intel_dp, crtc_state);
> +
> + if (crtc_state->has_audio)
> + intel_audio_codec_enable(encoder, crtc_state, conn_state);
> +}
> +
> +static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state,
> + const struct drm_connector_state *conn_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
> + enum port port = intel_ddi_get_encoder_port(encoder);
> +
> + intel_hdmi_handle_sink_scrambling(encoder,
> + conn_state->connector,
> + crtc_state->hdmi_high_tmds_clock_ratio,
> + crtc_state->hdmi_scrambling);
> +
> + /* In HDMI/DVI mode, the port width, and swing/emphasis values
> + * are ignored so nothing special needs to be done besides
> + * enabling the port.
> + */
> + I915_WRITE(DDI_BUF_CTL(port),
> + dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE);
> +
> + if (crtc_state->has_audio)
> + intel_audio_codec_enable(encoder, crtc_state, conn_state);
> +}
> +
> +static void intel_enable_ddi(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state)
> {
> - struct drm_encoder *encoder = &intel_encoder->base;
> - struct drm_i915_private *dev_priv = to_i915(encoder->dev);
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> - int type = intel_encoder->type;
> -
> - if (type == INTEL_OUTPUT_HDMI) {
> - struct intel_digital_port *intel_dig_port =
> - enc_to_dig_port(encoder);
> - bool clock_ratio = pipe_config->hdmi_high_tmds_clock_ratio;
> - bool scrambling = pipe_config->hdmi_scrambling;
> -
> - intel_hdmi_handle_sink_scrambling(intel_encoder,
> - conn_state->connector,
> - clock_ratio, scrambling);
> -
> - /* In HDMI/DVI mode, the port width, and swing/emphasis values
> - * are ignored so nothing special needs to be done besides
> - * enabling the port.
> - */
> - I915_WRITE(DDI_BUF_CTL(port),
> - intel_dig_port->saved_port_bits |
> - DDI_BUF_CTL_ENABLE);
> - } else if (type == INTEL_OUTPUT_EDP) {
> - struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> -
> - if (port == PORT_A && INTEL_GEN(dev_priv) < 9)
> - intel_dp_stop_link_train(intel_dp);
> -
> - intel_edp_backlight_on(pipe_config, conn_state);
> - intel_psr_enable(intel_dp, pipe_config);
> - intel_edp_drrs_enable(intel_dp, pipe_config);
> - }
> -
> - if (pipe_config->has_audio)
> - intel_audio_codec_enable(intel_encoder, pipe_config, conn_state);
> + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
> + intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
> + else
> + intel_enable_ddi_dp(encoder, crtc_state, conn_state);
> }
>
> static void intel_disable_ddi_dp(struct intel_encoder *encoder,
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-10-11 20:06 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-10 12:11 [PATCH v2 0/9] drm/i915: Cleaner DDI DP vs. HDMI split Ville Syrjala
2017-10-10 12:11 ` [PATCH v2 1/9] drm/i915: Dump 'output_types' in crtc state dump Ville Syrjala
2017-10-11 19:50 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 2/9] drm/i915: Extract intel_ddi_clk_disable() Ville Syrjala
2017-10-11 19:52 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 3/9] drm/i915: Extract intel_disable_ddi_buf() Ville Syrjala
2017-10-11 19:53 ` Jani Nikula
2017-10-10 12:12 ` [PATCH 4/9] drm/i915: Inline the required bits of intel_ddi_post_disable() into intel_ddi_fdi_post_disable() Ville Syrjala
2017-10-10 12:12 ` [PATCH v2 5/9] drm/i915: Split intel_ddi_post_disable() into DP vs. HDMI variants Ville Syrjala
2017-10-10 12:12 ` [PATCH 6/9] drm/i915: Remove useless eDP check from intel_ddi_pre_enable_dp() Ville Syrjala
2017-10-10 12:12 ` [PATCH 7/9] drm/i915: Split intel_disable_ddi() into DP vs. HDMI variants Ville Syrjala
2017-10-11 20:03 ` Jani Nikula
2017-10-12 9:49 ` Ville Syrjälä
2017-10-13 14:13 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 8/9] drm/i915: Plumb crtc_state etc. directly to intel_ddi_pre_enable_{dp, hdmi}() Ville Syrjala
2017-10-13 14:25 ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 9/9] drm/i915: Split intel_enable_ddi() into DP and HDMI variants Ville Syrjala
2017-10-11 20:06 ` Jani Nikula [this message]
2017-10-13 14:20 ` Jani Nikula
2017-10-13 18:10 ` Ville Syrjälä
2017-10-10 13:07 ` ✗ Fi.CI.BAT: warning for drm/i915: Cleaner DDI DP vs. HDMI split Patchwork
2017-10-10 13:21 ` Ville Syrjälä
2017-10-13 17:03 ` ✓ Fi.CI.BAT: success " Patchwork
2017-10-13 18:16 ` Ville Syrjälä
2017-10-13 18:49 ` Jani Nikula
2017-10-14 0:10 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h8v5o3f4.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.