From: Anthony Liguori <anthony@codemonkey.ws>
To: "Michael S. Tsirkin" <mst@redhat.com>, qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, drjones@redhat.com,
stefano.stabellini@eu.citrix.com, haoyu.zhang@huawei.com,
Paul.Durrant@citrix.com, akong@redhat.com, lersek@redhat.com,
david@gibson.dropbear.id.au
Subject: Re: [Qemu-devel] [PULL 00/21] pci,net,misc enhancements
Date: Fri, 21 Jun 2013 08:10:15 -0500 [thread overview]
Message-ID: <87hagrfw3s.fsf@codemonkey.ws> (raw)
In-Reply-To: <1371730033-5554-1-git-send-email-mst@redhat.com>
"Michael S. Tsirkin" <mst@redhat.com> writes:
> From: Michael S. Tsirkin <mst@redhat.com>
>
> The following changes since commit 90a2541b763b31d2b551b07e24aae3de5266d31b:
>
> target-i386: fix over 80 chars warnings (2013-06-15 17:50:38 +0000)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git tags/for_anthony
>
> for you to fetch changes up to f96c30047009f8a9c3cecf68104d8d99f989f54d:
>
> pci: Fold host_buses list into PCIHostState functionality
> (2013-06-19 18:35:05 +0300)
SEGV's during pretty much any test I try to run during startup:
Core was generated by `/home/aliguori/build/qemu/x86_64-softmmu/qemu-system-x86_64 -kernel /usr/local/'.
Program terminated with signal 11, Segmentation fault.
#0 qemu_get_queue (nic=0x0) at /home/aliguori/git/qemu/net/net.c:263
warning: Source file is more recent than executable.
263 return qemu_get_subqueue(nic, 0);
(gdb) bt
#0 qemu_get_queue (nic=0x0) at /home/aliguori/git/qemu/net/net.c:263
#1 0x00007f2d73fb2902 in virtio_net_device_init (vdev=0x7f2d75aeafe0)
at /home/aliguori/git/qemu/hw/net/virtio-net.c:1484
#2 0x00007f2d73fbb426 in virtio_device_init (qdev=0x7f2d75aeafe0)
at /home/aliguori/git/qemu/hw/virtio/virtio.c:1113
#3 0x00007f2d73e421c1 in device_realize (dev=0x7f2d75aeafe0, err=
0x7fff85322420) at /home/aliguori/git/qemu/hw/core/qdev.c:178
#4 0x00007f2d73e43863 in device_set_realized (obj=0x7f2d75aeafe0, value=true,
err=0x7fff85322530) at /home/aliguori/git/qemu/hw/core/qdev.c:699
#5 0x00007f2d73f29a2e in property_set_bool (obj=0x7f2d75aeafe0,
v=<optimized out>, opaque=0x7f2d75af5b60, name=<optimized out>, errp=
0x7fff85322530) at /home/aliguori/git/qemu/qom/object.c:1301
#6 0x00007f2d73f2c8e5 in object_property_set_qobject (obj=0x7f2d75aeafe0,
value=<optimized out>, name=0x7f2d740a4763 "realized", errp=0x7fff85322530)
at /home/aliguori/git/qemu/qom/qom-qobject.c:24
#7 0x00007f2d73f2b6fe in object_property_set_bool (obj=obj@entry=
0x7f2d75aeafe0, value=value@entry=true, name=name@entry=
0x7f2d740a4763 "realized", errp=errp@entry=0x7fff85322530)
at /home/aliguori/git/qemu/qom/object.c:852
#8 0x00007f2d73e427aa in qdev_init (dev=dev@entry=0x7f2d75aeafe0)
at /home/aliguori/git/qemu/hw/core/qdev.c:163
#9 0x00007f2d73ee0079 in virtio_net_pci_init (vpci_dev=0x7f2d75aea790)
at /home/aliguori/git/qemu/hw/virtio/virtio-pci.c:1403
---Type <return> to continue, or q <return> to quit---
#10 0x00007f2d73ee08af in virtio_pci_init (pci_dev=<optimized out>)
at /home/aliguori/git/qemu/hw/virtio/virtio-pci.c:990
#11 0x00007f2d73e9706d in pci_qdev_init (qdev=0x7f2d75aea790)
at /home/aliguori/git/qemu/hw/pci/pci.c:1717
#12 0x00007f2d73e421c1 in device_realize (dev=0x7f2d75aea790, err=
0x7fff853226a0) at /home/aliguori/git/qemu/hw/core/qdev.c:178
#13 0x00007f2d73e43863 in device_set_realized (obj=0x7f2d75aea790, value=true,
err=0x7fff853227b0) at /home/aliguori/git/qemu/hw/core/qdev.c:699
#14 0x00007f2d73f29a2e in property_set_bool (obj=0x7f2d75aea790,
v=<optimized out>, opaque=0x7f2d75aed210, name=<optimized out>, errp=
0x7fff853227b0) at /home/aliguori/git/qemu/qom/object.c:1301
#15 0x00007f2d73f2c8e5 in object_property_set_qobject (obj=0x7f2d75aea790,
value=<optimized out>, name=0x7f2d740a4763 "realized", errp=0x7fff853227b0)
at /home/aliguori/git/qemu/qom/qom-qobject.c:24
#16 0x00007f2d73f2b6fe in object_property_set_bool (obj=obj@entry=
0x7f2d75aea790, value=value@entry=true, name=name@entry=
0x7f2d740a4763 "realized", errp=errp@entry=0x7fff853227b0)
at /home/aliguori/git/qemu/qom/object.c:852
#17 0x00007f2d73e427aa in qdev_init (dev=dev@entry=0x7f2d75aea790)
at /home/aliguori/git/qemu/hw/core/qdev.c:163
#18 0x00007f2d73f12f97 in qdev_device_add (opts=opts@entry=0x7f2d75aea5d0)
at /home/aliguori/git/qemu/qdev-monitor.c:497
#19 0x00007f2d73f1339a in do_device_add (mon=<optimized out>,
---Type <return> to continue, or q <return> to quit---
qdict=<optimized out>, ret_data=<optimized out>)
at /home/aliguori/git/qemu/qdev-monitor.c:609
#20 0x00007f2d73fd0568 in qmp_call_cmd (cmd=<optimized out>, params=
0x7f2d75ae9380, mon=0x7f2d75a7a600)
at /home/aliguori/git/qemu/monitor.c:4497
#21 handle_qmp_command (parser=<optimized out>, tokens=<optimized out>)
at /home/aliguori/git/qemu/monitor.c:4563
#22 0x00007f2d740794ba in json_message_process_token (lexer=0x7f2d75a7a6b0,
token=0x7f2d75b47720, type=JSON_OPERATOR, x=129, y=0)
at /home/aliguori/git/qemu/qobject/json-streamer.c:87
#23 0x00007f2d7408b9cf in json_lexer_feed_char (lexer=lexer@entry=
0x7f2d75a7a6b0, ch=125 '}', flush=flush@entry=false)
at /home/aliguori/git/qemu/qobject/json-lexer.c:303
#24 0x00007f2d7408bb16 in json_lexer_feed (lexer=0x7f2d75a7a6b0,
buffer=<optimized out>, size=<optimized out>)
at /home/aliguori/git/qemu/qobject/json-lexer.c:356
#25 0x00007f2d740796d1 in json_message_parser_feed (parser=<optimized out>,
buffer=<optimized out>, size=<optimized out>)
at /home/aliguori/git/qemu/qobject/json-streamer.c:110
#26 0x00007f2d73fceafb in monitor_control_read (opaque=<optimized out>,
buf=<optimized out>, size=<optimized out>)
at /home/aliguori/git/qemu/monitor.c:4584
#27 0x00007f2d73f16381 in qemu_chr_be_write (len=<optimized out>, buf=
---Type <return> to continue, or q <return> to quit---
0x7fff85322b20 "}\n", s=0x7f2d75a71a00)
at /home/aliguori/git/qemu/qemu-char.c:165
#28 tcp_chr_read (chan=<optimized out>, cond=<optimized out>, opaque=
0x7f2d75a71a00) at /home/aliguori/git/qemu/qemu-char.c:2467
#29 0x00007f2d73405a55 in g_main_context_dispatch ()
from /lib64/libglib-2.0.so.0
#30 0x00007f2d73eec438 in glib_pollfds_poll ()
at /home/aliguori/git/qemu/main-loop.c:188
#31 os_host_main_loop_wait (timeout=<optimized out>)
at /home/aliguori/git/qemu/main-loop.c:233
#32 main_loop_wait (nonblocking=<optimized out>)
at /home/aliguori/git/qemu/main-loop.c:465
#33 0x00007f2d73da35a1 in main_loop () at /home/aliguori/git/qemu/vl.c:2028
#34 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>)
at /home/aliguori/git/qemu/vl.c:4386
>
> ----------------------------------------------------------------
> pci,net,misc enhancements
>
> This includes some pci and net-related enhancements:
>
> Better support for systems with multiple PCI root buses
> A new management interface for access to rx filter in NICs
> KVM Speedup for MSI updates on kvm
> FW cfg interface for more robust pci programming in BIOS
> Minor fixes/cleanups for fw cfg and cross-version migration -
> because of dependencies with other patches
>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>
> ----------------------------------------------------------------
> Amos Kong (1):
> net: add support of mac-programming over macvtap in QEMU side
>
> Andrew Jones (1):
> e1000: cleanup process_tx_desc
>
> David Gibson (10):
> pci: Cleanup configuration for pci-hotplug.c
> pci: Move pci_read_devaddr to pci-hotplug-old.c
> pci: Abolish pci_find_root_bus()
> pci: Use helper to find device's root bus in pci_find_domain()
> pci: Replace pci_find_domain() with more general pci_root_bus_path()
> pci: Add root bus argument to pci_get_bus_devfn()
> pci: Add root bus parameter to pci_nic_init()
> pci: Simpler implementation of primary PCI bus
> pci: Remove domain from PCIHostBus
> pci: Fold host_buses list into PCIHostState functionality
>
> Michael S. Tsirkin (9):
> range: add Range structure
> pci: store PCI hole ranges in guestinfo structure
> pc: pass PCI hole ranges to Guests
> pc_piix: cleanup init compat handling
> kvm: zero-initialize KVM_SET_GSI_ROUTING input
> kvm: skip system call when msi route is unchanged
> MAINTAINERS: s/Marcelo/Paolo/
> pvpanic: initialization cleanup
> pvpanic: fix fwcfg for big endian hosts
>
> MAINTAINERS | 2 +-
> QMP/qmp-events.txt | 17 ++++
> default-configs/i386-softmmu.mak | 3 +-
> default-configs/ppc64-softmmu.mak | 2 -
> default-configs/x86_64-softmmu.mak | 3 +-
> hmp-commands.hx | 4 +-
> hw/alpha/dp264.c | 2 +-
> hw/arm/realview.c | 6 +-
> hw/arm/versatilepb.c | 2 +-
> hw/i386/pc.c | 74 ++++++++++++++-
> hw/i386/pc_piix.c | 40 +++++---
> hw/i386/pc_q35.c | 18 +++-
> hw/mips/mips_fulong2e.c | 6 +-
> hw/mips/mips_malta.c | 6 +-
> hw/misc/pvpanic.c | 31 ++++---
> hw/net/e1000.c | 18 ++--
> hw/net/virtio-net.c | 111 ++++++++++++++++++++++
> hw/pci-host/piix.c | 9 ++
> hw/pci-host/q35.c | 17 ++++
> hw/pci/Makefile.objs | 2 +-
> hw/pci/{pci-hotplug.c => pci-hotplug-old.c} | 75 ++++++++++++---
> hw/pci/pci.c | 137 ++++++++++++++--------------
> hw/pci/pci_host.c | 1 +
> hw/pci/pcie_aer.c | 9 +-
> hw/ppc/e500.c | 2 +-
> hw/ppc/mac_newworld.c | 2 +-
> hw/ppc/mac_oldworld.c | 2 +-
> hw/ppc/ppc440_bamboo.c | 2 +-
> hw/ppc/prep.c | 2 +-
> hw/ppc/spapr.c | 2 +-
> hw/ppc/spapr_pci.c | 10 ++
> hw/sh4/r2d.c | 5 +-
> hw/sparc64/sun4u.c | 2 +-
> include/hw/i386/pc.h | 22 ++++-
> include/hw/pci-host/q35.h | 2 +
> include/hw/pci/pci.h | 17 ++--
> include/hw/pci/pci_host.h | 12 +++
> include/monitor/monitor.h | 1 +
> include/net/net.h | 3 +
> include/qemu/range.h | 16 ++++
> include/qemu/typedefs.h | 1 +
> kvm-all.c | 23 +++--
> monitor.c | 1 +
> net/net.c | 47 ++++++++++
> qapi-schema.json | 75 +++++++++++++++
> qmp-commands.hx | 63 +++++++++++++
> 46 files changed, 733 insertions(+), 174 deletions(-)
> rename hw/pci/{pci-hotplug.c => pci-hotplug-old.c} (78%)
next prev parent reply other threads:[~2013-06-21 13:10 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 13:08 [Qemu-devel] [PULL 00/21] pci,net,misc enhancements Michael S. Tsirkin
2013-06-20 13:08 ` [Qemu-devel] [PULL 01/21] range: add Range structure Michael S. Tsirkin
2013-06-20 13:08 ` [Qemu-devel] [PULL 03/21] pc: pass PCI hole ranges to Guests Michael S. Tsirkin
2013-06-20 13:08 ` [Qemu-devel] [PULL 04/21] pc_piix: cleanup init compat handling Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] [PULL 05/21] e1000: cleanup process_tx_desc Michael S. Tsirkin
2013-06-20 13:10 ` [PULL 06/21] kvm: zero-initialize KVM_SET_GSI_ROUTING input Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] " Michael S. Tsirkin
2013-06-20 13:10 ` [PULL 07/21] kvm: skip system call when msi route is unchanged Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] " Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] [PULL 08/21] MAINTAINERS: s/Marcelo/Paolo/ Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] [PULL 09/21] pvpanic: initialization cleanup Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] [PULL 10/21] pvpanic: fix fwcfg for big endian hosts Michael S. Tsirkin
2013-06-20 13:10 ` [Qemu-devel] [PULL 11/21] net: add support of mac-programming over macvtap in QEMU side Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 13/21] pci: Move pci_read_devaddr to pci-hotplug-old.c Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 14/21] pci: Abolish pci_find_root_bus() Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 15/21] pci: Use helper to find device's root bus in pci_find_domain() Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 16/21] pci: Replace pci_find_domain() with more general pci_root_bus_path() Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 17/21] pci: Add root bus argument to pci_get_bus_devfn() Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 18/21] pci: Add root bus parameter to pci_nic_init() Michael S. Tsirkin
2013-06-20 17:07 ` Richard Henderson
2013-06-20 13:11 ` [Qemu-devel] [PULL 19/21] pci: Simpler implementation of primary PCI bus Michael S. Tsirkin
2013-06-20 13:11 ` [Qemu-devel] [PULL 20/21] pci: Remove domain from PCIHostBus Michael S. Tsirkin
2013-06-20 13:12 ` [Qemu-devel] [PULL 21/21] pci: Fold host_buses list into PCIHostState functionality Michael S. Tsirkin
2013-06-20 19:02 ` [Qemu-devel] [PULL 00/21] pci,net,misc enhancements Anthony Liguori
2013-06-20 20:34 ` Gleb Natapov
2013-06-20 20:46 ` Anthony Liguori
2013-06-21 13:10 ` Anthony Liguori [this message]
2013-06-23 11:38 ` Michael S. Tsirkin
2013-06-24 6:43 ` Amos Kong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87hagrfw3s.fsf@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=Paul.Durrant@citrix.com \
--cc=akong@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=drjones@redhat.com \
--cc=haoyu.zhang@huawei.com \
--cc=lersek@redhat.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefano.stabellini@eu.citrix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.