Re: [PATCH] OMAP: Voltage: fix typos, compile break

[Kevin Hilman <khilman@deeprootsystems.com>]

mturquette@gmail.com writes:

> From: Mike Turquette <mturquette@ti.com>
>
> mach-omap/voltage.c incorrectly called omap_get_mpuss_device and
> omap_get_l3_device.  The correct function names are
> omap2_get_mpuss_device and omap2_get_l3_device respectively.
>
> This fixes a compile break.  Test on OMAP3430 SDP.
>
> Signed-off-by: Mike Turquette <mturquette@ti.com>
> ---
>
> This patch is meant to apply to Kevin's pm-srf branch.  Without it
> compilation for OMAP3 is broken.

pm-srf branch is no longer supported (by me anyways)

and this problem is fixed in the pm-sr branch which is included in the
latest PM branch.

Kevin

>  arch/arm/mach-omap2/voltage.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
> index e7055f6..148e4d4 100644
> --- a/arch/arm/mach-omap2/voltage.c
> +++ b/arch/arm/mach-omap2/voltage.c
> @@ -385,7 +385,7 @@ static void __init omap3_vdd_data_configure(int vdd)
>  		vdd_info[vdd].volt_clk = clk_get(NULL, "dpll1_ck");
>  		WARN(IS_ERR(vdd_info[vdd].volt_clk),
>  				"unable to get clock for VDD%d\n", vdd + 1);
> -		vdd_info[vdd].opp_dev = omap_get_mpuss_device();
> +		vdd_info[vdd].opp_dev = omap2_get_mpuss_device();
>  		vdd_info[vdd].vp_reg.tranxdone_status =
>  				OMAP3430_VP1_TRANXDONE_ST_MASK;
>  		vdd_info[vdd].cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET;
> @@ -411,7 +411,7 @@ static void __init omap3_vdd_data_configure(int vdd)
>  		vdd_info[vdd].volt_clk = clk_get(NULL, "l3_ick");
>  		WARN(IS_ERR(vdd_info[vdd].volt_clk),
>  				"unable to get clock for VDD%d\n", vdd + 1);
> -		vdd_info[vdd].opp_dev = omap_get_l3_device();
> +		vdd_info[vdd].opp_dev = omap2_get_l3_device();
>  		vdd_info[vdd].vp_reg.tranxdone_status =
>  					OMAP3430_VP2_TRANXDONE_ST_MASK;
>  		vdd_info[vdd].cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET;