Re: [PATCH 0/3] Add support for OMAP35x processors (v3)

[Kevin Hilman <khilman@deeprootsystems.com>]

Sanjeev Premi <premi@ti.com> writes:

> These patches provide support for the OMAP35x processors.
>
> This is essentially a re-submit after series of discusions
> earlier in the list. It had always been getting pushed in
> my to-do list :(
> See: http://marc.info/?l=linux-omap&m=122029900603111&w=2
>
> Based on the comments received, this patch includes following:
>   1) Updates to Kconfig
>      (Includes the changes suggested by Aguirre Rodriguez)
>   2) Runtime check for OMAP35x
>   3) Updates to omap3_evm_defconfig
>
> If the changes look good, I can make updates to Beagle,
> Overo and Pandora boards as well.
>
> Best regards,
> Sanjeev

Sanjeev,

Is the HEAD of linux-omap working for you on omap3evm?  I just got my
EVM and am getting it going but it doesn't boot without
CONFIG_DEBUG_LL, and with that enabled, as soon as the normal serial
driver is enabled, the serial console goes crazy with garbage output.

I'm about to push a new PM branch and wanted to do some testing on the
EVM.

Kevin

> Sanjeev Premi (3):
>   Add support for OMAP35x processors
>   Runitme check for OMAP35x
>   Updates for OMAP3EVM
>
>  arch/arm/configs/omap3_evm_defconfig     |    5 ++
>  arch/arm/mach-omap2/Kconfig              |   65 ++++++++++++++++++++--
>  arch/arm/mach-omap2/board-omap3evm.c     |    2 +-
>  arch/arm/plat-omap/common.c              |   68 +++++++++++++++++++++++
>  arch/arm/plat-omap/include/mach/common.h |    1 +
>  arch/arm/plat-omap/include/mach/cpu.h    |   88 +++++++++++++++++++++++++++++-
>  6 files changed, 220 insertions(+), 9 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html