From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org
Subject: [PATCH] SH2(A) cache update
Date: Sun, 06 Jul 2008 04:50:45 +0000 [thread overview]
Message-ID: <87hcb37h0a.wl%ysato@users.sourceforge.jp> (raw)
Include
- SH2 (7619) Writeback support.
- SH2A cache handling fix.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 29d8e3c..a84a104 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -229,7 +229,6 @@ choice
config CACHE_WRITEBACK
bool "Write-back"
- depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
config CACHE_WRITETHROUGH
bool "Write-through"
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index e295db6..e3f95b2 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -5,7 +5,9 @@
obj-y := init.o extable_32.o consistent.o
ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH2) += cache-sh2.o
+sh2-$(CONFIG_CPU_SH2) := cache-sh2.o
+sh2-$(CONFIG_CPU_SH2A) := cache-sh2a.o
+obj-$(CONFIG_CPU_SH2) += $(sh2-y)
obj-$(CONFIG_CPU_SH3) += cache-sh3.o
obj-$(CONFIG_CPU_SH4) += cache-sh4.o
obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 6614033..cfa5d80 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -2,6 +2,7 @@
* arch/sh/mm/cache-sh2.c
*
* Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
*
* Released under the terms of the GNU GPL v2.0.
*/
@@ -15,6 +16,74 @@
#include <asm/cacheflush.h>
#include <asm/io.h>
+#ifdef CONFIG_CPU_SUBTYPE_SH7619
+void __flush_wback_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+ int way;
+ for (way = 0; way < 4; way++) {
+ unsigned long data = ctrl_inl(addr | (way << 12));
+ if ((data & CACHE_PHYSADDR_MASK) = (v & CACHE_PHYSADDR_MASK)) {
+ data &= ~SH_CACHE_UPDATED;
+ ctrl_outl(data, addr | (way << 12));
+ }
+ }
+ }
+}
+
+void __flush_purge_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+ }
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+#ifdef CONFIG_CACHE_WRITEBACK
+/*
+ SH-2 is line invalidate not support
+ All line invalidate
+*/
+ unsigned long ccr;
+ unsigned long flags;
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ ccr = ctrl_inl(CCR);
+ ccr |= CCR_CACHE_INVALIDATE;
+ ctrl_outl(ccr, CCR);
+
+ back_to_cached();
+ local_irq_restore(flags);
+#else
+ unsigned long v;
+ unsigned long begin, end;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+ }
+#endif
+}
+#else
void __flush_wback_region(void *start, int size)
{
unsigned long v;
@@ -54,4 +123,5 @@ void __flush_invalidate_region(void *start, int size)
ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
}
}
+#endif
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 0000000..6d8da5c
--- /dev/null
+++ b/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,101 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+void __flush_wback_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+ unsigned long flags;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
+ int way;
+ for (way = 0; way < 4; way++) {
+ unsigned long data = ctrl_inl(addr | (way << 11));
+ if ((data & CACHE_PHYSADDR_MASK) = (v & CACHE_PHYSADDR_MASK)) {
+ data &= ~SH_CACHE_UPDATED;
+ ctrl_outl(data, addr | (way << 11));
+ }
+ }
+ }
+
+ back_to_cached();
+ local_irq_restore(flags);
+}
+
+void __flush_purge_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+ unsigned long flags;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ }
+ back_to_cached();
+ local_irq_restore(flags);
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+ unsigned long flags;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ local_irq_save(flags);
+ jump_to_uncached();
+
+#ifdef CONFIG_CACHE_WRITEBACK
+/*
+ SH-2A O-cache is line invalidate not support
+ All line invalidate
+*/
+ ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+ /* I-cache invalidate */
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ }
+#else
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ }
+#endif
+ back_to_cached();
+ local_irq_restore(flags);
+}
diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h
index 4e0b165..673515b 100644
--- a/include/asm-sh/cpu-sh2/cache.h
+++ b/include/asm-sh/cpu-sh2/cache.h
@@ -21,11 +21,11 @@
#define CCR 0xffffffec
#define CCR_CACHE_CE 0x01 /* Cache enable */
-#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */
+#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */
/* 0x00000000-0x7fffffff: Write-through */
/* 0x80000000-0x9fffffff: Write-back */
/* 0xc0000000-0xdfffffff: Write-through */
-#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */
+#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */
/* 0x00000000-0x7fffffff: Write-back */
/* 0x80000000-0x9fffffff: Write-through */
/* 0xc0000000-0xdfffffff: Write-back */
@@ -36,6 +36,8 @@
#define CCR_CACHE_ENABLE CCR_CACHE_CE
#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK 0x1ffffc00
+
#endif
#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h
index afe228b..defb0ba 100644
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ b/include/asm-sh/cpu-sh2a/cache.h
@@ -36,5 +36,8 @@
#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE)
#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK 0x1ffffc00
#endif /* __ASM_CPU_SH2A_CACHE_H */
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
next reply other threads:[~2008-07-06 4:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-06 4:50 Yoshinori Sato [this message]
2008-07-08 20:20 ` [PATCH] SH2(A) cache update Yoshinori Sato
2008-08-04 7:35 ` Paul Mundt
2008-08-05 19:26 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87hcb37h0a.wl%ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.