From: Jani Nikula <jani.nikula@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t 1/2] tools/intel_vbt_decode: update vbt defs
Date: Tue, 29 Oct 2019 10:39:46 +0200 [thread overview]
Message-ID: <87imo89c8d.fsf@intel.com> (raw)
In-Reply-To: <20191028160729.GO1208@intel.com>
On Mon, 28 Oct 2019, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Mon, Oct 28, 2019 at 03:54:50PM +0200, Jani Nikula wrote:
>> Update intel_vbt_defs.h from kernel commit 96815f3d8b50 ("drm/i915/bios:
>> add compression parameter block definition").
>
> Looks like this also pulls in a couple of other changes that were never
> synced. Anyways, lgtm when compared with the kernel stuff.
Thanks for the reviews, pushed both, with a note about syncing other
changes too.
BR,
Jani.
>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
>>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>> tools/intel_vbt_defs.h | 58 ++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 58 insertions(+)
>>
>> diff --git a/tools/intel_vbt_defs.h b/tools/intel_vbt_defs.h
>> index c903cda3bb5e..69a7cb1fa121 100644
>> --- a/tools/intel_vbt_defs.h
>> +++ b/tools/intel_vbt_defs.h
>> @@ -114,6 +114,7 @@ enum bdb_block_id {
>> BDB_LVDS_POWER = 44,
>> BDB_MIPI_CONFIG = 52,
>> BDB_MIPI_SEQUENCE = 53,
>> + BDB_COMPRESSION_PARAMETERS = 56,
>> BDB_SKIP = 254, /* VBIOS private block, ignore */
>> };
>>
>> @@ -291,6 +292,8 @@ struct bdb_general_features {
>> #define DVO_PORT_HDMIE 12 /* 193 */
>> #define DVO_PORT_DPF 13 /* N/A */
>> #define DVO_PORT_HDMIF 14 /* N/A */
>> +#define DVO_PORT_DPG 15
>> +#define DVO_PORT_HDMIG 16
>> #define DVO_PORT_MIPIA 21 /* 171 */
>> #define DVO_PORT_MIPIB 22 /* 171 */
>> #define DVO_PORT_MIPIC 23 /* 171 */
>> @@ -310,10 +313,13 @@ enum vbt_gmbus_ddi {
>> DDC_BUS_DDI_F,
>> ICL_DDC_BUS_DDI_A = 0x1,
>> ICL_DDC_BUS_DDI_B,
>> + TGL_DDC_BUS_DDI_C,
>> ICL_DDC_BUS_PORT_1 = 0x4,
>> ICL_DDC_BUS_PORT_2,
>> ICL_DDC_BUS_PORT_3,
>> ICL_DDC_BUS_PORT_4,
>> + TGL_DDC_BUS_PORT_5,
>> + TGL_DDC_BUS_PORT_6,
>> };
>>
>> #define DP_AUX_A 0x40
>> @@ -322,6 +328,7 @@ enum vbt_gmbus_ddi {
>> #define DP_AUX_D 0x30
>> #define DP_AUX_E 0x50
>> #define DP_AUX_F 0x60
>> +#define DP_AUX_G 0x70
>>
>> #define VBT_DP_MAX_LINK_RATE_HBR3 0
>> #define VBT_DP_MAX_LINK_RATE_HBR2 1
>> @@ -805,4 +812,55 @@ struct bdb_mipi_sequence {
>> u8 data[0]; /* up to 6 variable length blocks */
>> } __packed;
>>
>> +/*
>> + * Block 56 - Compression Parameters
>> + */
>> +
>> +#define VBT_RC_BUFFER_BLOCK_SIZE_1KB 0
>> +#define VBT_RC_BUFFER_BLOCK_SIZE_4KB 1
>> +#define VBT_RC_BUFFER_BLOCK_SIZE_16KB 2
>> +#define VBT_RC_BUFFER_BLOCK_SIZE_64KB 3
>> +
>> +#define VBT_DSC_LINE_BUFFER_DEPTH(vbt_value) ((vbt_value) + 8) /* bits */
>> +#define VBT_DSC_MAX_BPP(vbt_value) (6 + (vbt_value) * 2)
>> +
>> +struct dsc_compression_parameters_entry {
>> + u8 version_major:4;
>> + u8 version_minor:4;
>> +
>> + u8 rc_buffer_block_size:2;
>> + u8 reserved1:6;
>> +
>> + /*
>> + * Buffer size in bytes:
>> + *
>> + * 4 ^ rc_buffer_block_size * 1024 * (rc_buffer_size + 1) bytes
>> + */
>> + u8 rc_buffer_size;
>> + u32 slices_per_line;
>> +
>> + u8 line_buffer_depth:4;
>> + u8 reserved2:4;
>> +
>> + /* Flag Bits 1 */
>> + u8 block_prediction_enable:1;
>> + u8 reserved3:7;
>> +
>> + u8 max_bpp; /* mapping */
>> +
>> + /* Color depth capabilities */
>> + u8 reserved4:1;
>> + u8 support_8bpc:1;
>> + u8 support_10bpc:1;
>> + u8 support_12bpc:1;
>> + u8 reserved5:4;
>> +
>> + u16 slice_height;
>> +} __packed;
>> +
>> +struct bdb_compression_parameters {
>> + u16 entry_size;
>> + struct dsc_compression_parameters_entry data[16];
>> +} __packed;
>> +
>> #endif /* _INTEL_VBT_DEFS_H_ */
>> --
>> 2.20.1
>>
>> _______________________________________________
>> igt-dev mailing list
>> igt-dev@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/igt-dev
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-10-29 8:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 13:54 [igt-dev] [PATCH i-g-t 1/2] tools/intel_vbt_decode: update vbt defs Jani Nikula
2019-10-28 13:54 ` [igt-dev] [PATCH i-g-t 2/2] tools/intel_vbt_decode: add decoding of the compression parameters block Jani Nikula
2019-10-28 16:35 ` Ville Syrjälä
2019-10-28 14:37 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tools/intel_vbt_decode: update vbt defs Patchwork
2019-10-28 16:07 ` [igt-dev] [PATCH i-g-t 1/2] " Ville Syrjälä
2019-10-29 8:39 ` Jani Nikula [this message]
2019-10-29 10:02 ` [igt-dev] ✓ Fi.CI.IGT: success for series starting with [i-g-t,1/2] " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87imo89c8d.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.