From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hgr9j-0000gM-Iy for ath10k@lists.infradead.org; Fri, 28 Jun 2019 13:43:13 +0000 From: Kalle Valo Subject: Re: ath10k-firmware: QCA4019 hw1.0: Add AVM FRITZ!Box 7530 specific BDFs References: <319459b8-abce-a2d7-c8d4-df9e253dccef@david-bauer.net> Date: Fri, 28 Jun 2019 16:43:07 +0300 In-Reply-To: <319459b8-abce-a2d7-c8d4-df9e253dccef@david-bauer.net> (David Bauer's message of "Sat, 9 Feb 2019 23:06:53 +0100") Message-ID: <87imspddw4.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: David Bauer Cc: ath10k@lists.infradead.org David Bauer writes: > this is a set of board.bin files for the AVM FRITZ!Box 7530 Router [0], > which I wish to be added to the ath10k-firmware repository. > > As per the current "Submitting board files" guidelines [1]: > > * description for what hardware this is: > - it is a IPQ4019 based board [0] > - one QCA40xx radio is used as 2.4 GHz radio > - one QCA40xx radio is used as 5 GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > - all files were extracted from official vendor firmware which was on > the device and can be downloaded from AVM [2] > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > - qca4019 hw1.0 > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=AVM-FRITZBox-7530 > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=AVM-FRITZBox-7530 > > * sha256sum of each new board file to add > - bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=AVM-FRITZBox-7530 > - c7b6026635bd32fe0709600edb024e1752151a0d038a1a8830f847bb815ad32b > - bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=AVM-FRITZBox-7530 > - 5191621ea04058dad1709c492c559de24454374c9d286582154ff94a1978d248 > > * attach the actual board file (board.bin) > - the name of the files are equal to the id string in the board-2.bin > (minus the ".bin") Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=AVM-FRITZBox-7530 bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=AVM-FRITZBox-7530 Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 44 in total https://github.com/kvalo/ath10k-firmware/commit/c0190272ee9ca94efbfa30b48bc2a8f29a91d7bd -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k