Re: [BXT MIPI PATCH v2 12/13] drm/i915/bxt: Remove DSP CLK_GATE programming for BXT

[Jani Nikula <jani.nikula@linux.intel.com>]

On Sun, 26 Jul 2015, Uma Shankar <uma.shankar@intel.com> wrote:
> DSP CLK_GATE registers are specific to BYT and CHT.
> Avoid programming the same for BXT platform.
>
> v2: Rebased on latest drm nightly branch.
>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dsi.c |    9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 350e10a..d0b26c8 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -612,6 +612,7 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
>  
>  static void intel_dsi_post_disable(struct intel_encoder *encoder)
>  {
> +	struct drm_device *dev = encoder->base.dev;
>  	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>  	u32 val;
> @@ -622,9 +623,11 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
>  
>  	intel_dsi_clear_device_ready(encoder);
>  
> -	val = I915_READ(DSPCLK_GATE_D);
> -	val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
> -	I915_WRITE(DSPCLK_GATE_D, val);
> +	if (!IS_BROXTON(dev)) {

You can use dev_priv for IS_BROXTON.

> +		val = I915_READ(DSPCLK_GATE_D);
> +		val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
> +		I915_WRITE(DSPCLK_GATE_D, val);
> +	}
>  
>  	drm_panel_unprepare(intel_dsi->panel);
>  
> -- 
> 1.7.9.5
>

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx