Re: [PATCH] pci: fix interrupt-map for bridges

[Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>]

Alexey Kardashevskiy <aik@ozlabs.ru> writes:

> The previous scheme always put 0 as a parent slot#. However it is
> not always the case and QEMU's PCI bridge does not support putting
> device at slot#0 as it claims SHPC support for hotplug.
>
> This modifies the interrups map to let the linux guest resolve XICS
> global interrupt number correctly.
>
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
>
> This is the example of working system:
>
> [root@erif_root pci@1]# lspci
> 0001:00:01.0 PCI bridge: Red Hat, Inc. Device 0001
> 0001:01:02.0 PCI bridge: Red Hat, Inc. Device 0001
> 0001:01:03.0 PCI bridge: Red Hat, Inc. Device 0001
> 0001:02:01.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
> 0001:02:02.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
> 0001:03:01.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
> 0001:03:02.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
> [root@erif_root pci@1]# pwd
> /proc/device-tree/pci@80000002000000f/pci@1
> [root@erif_root pci@1]# hexdump -e '9/4 "%08x "' -e '"\n"' i*map
> 00001000 00000000 00000000 00000001 3e57f7e0 00000800 00000000 00000000 00000003
> 00001000 00000000 00000000 00000002 3e57f7e0 00000800 00000000 00000000 00000000
> 00001000 00000000 00000000 00000003 3e57f7e0 00000800 00000000 00000000 00000001
> 00001000 00000000 00000000 00000004 3e57f7e0 00000800 00000000 00000000 00000002
> 00001800 00000000 00000000 00000001 3e57f7e0 00000800 00000000 00000000 00000000
> 00001800 00000000 00000000 00000002 3e57f7e0 00000800 00000000 00000000 00000001
> 00001800 00000000 00000000 00000003 3e57f7e0 00000800 00000000 00000000 00000002
> 00001800 00000000 00000000 00000004 3e57f7e0 00000800 00000000 00000000 00000003
> [root@erif_root pci@1]# cd pci@2/
> [root@erif_root pci@2]# hexdump -e '9/4 "%08x "' -e '"\n"' i*map
> 00000800 00000000 00000000 00000001 3e5a86f0 00001000 00000000 00000000 00000002
> 00000800 00000000 00000000 00000002 3e5a86f0 00001000 00000000 00000000 00000003
> 00000800 00000000 00000000 00000003 3e5a86f0 00001000 00000000 00000000 00000000
> 00000800 00000000 00000000 00000004 3e5a86f0 00001000 00000000 00000000 00000001
> 00001000 00000000 00000000 00000001 3e5a86f0 00001000 00000000 00000000 00000003
> 00001000 00000000 00000000 00000002 3e5a86f0 00001000 00000000 00000000 00000000
> 00001000 00000000 00000000 00000003 3e5a86f0 00001000 00000000 00000000 00000001
> 00001000 00000000 00000000 00000004 3e5a86f0 00001000 00000000 00000000 00000002
> [root@erif_root pci@2]# cd ethernet@
> ethernet@1/ ethernet@2/
> [root@erif_root pci@2]# cd ethernet@1/
> [root@erif_root ethernet@1]# lsprop reg
> reg              00020800 00000000 00000000 00000000 00000000
> 		 02020810 00000000 00000000 00000000 00020000
>  		 02020814 00000000 00000000 00000000 00020000
>  		 01020818 00000000 00000000 00000000 00000020
>  		 02020830 00000000 00000000 00000000 00020000
> [root@erif_root ethernet@1]# lsprop interrupts
> interrupts       00000002
> ---
>  board-qemu/slof/pci-interrupts.fs | 31 ++++++++++++++++++++-----------
>  1 file changed, 20 insertions(+), 11 deletions(-)
>
> diff --git a/board-qemu/slof/pci-interrupts.fs b/board-qemu/slof/pci-interrupts.fs
> index a12d7bb..62785a7 100644
> --- a/board-qemu/slof/pci-interrupts.fs
> +++ b/board-qemu/slof/pci-interrupts.fs
> @@ -1,17 +1,26 @@
>
>  : pci-gen-irq-map-one ( prop-addr prop-len slot pin -- prop-addr prop-len )
> -        2dup + 4 mod                                        ( prop-addr prop-len slot pin parentpin )
> +        2dup + 4 mod                ( prop-addr prop-len slot pin parentpin )
> +        >r >r >r                    ( prop-addr prop-len R: swizzledpin pin slot )
> +
> +        \ Child slot#
> +        r> B lshift encode-int+     ( prop-addr prop-len R: swizzledpin pin )

Redundant push to the R-Stack, can just be

        >r >r                    ( prop-addr prop-len slot R: swizzledpin pin )

        \ Child slot#
        B lshift encode-int+     ( prop-addr prop-len R: swizzledpin pin )


> +        \ Child 64bit BAR (not really used)
> +        0 encode-64+
> +        \ Chile pin#
> +        r> encode-int+              ( prop-addr prop-len R: swizzledpin )
> +
> +        \ Parent phandle
> +        get-parent encode-int+
> +
> +        \ Parent slot#
>          get-node >space
> -        pci-addr2dev + 1- 4 mod 1+  \ do swizzling          ( prop-addr prop-len slot pin swizzledpin )
> -        >r >r >r                                            ( prop-addr prop-len R: swizzledpin pin slot )
> -
> -        r> B lshift encode-int+
> -        0 encode-64+                \ device slot           ( prop-addr prop-len R: swizzledpin pin )
> -        r> encode-int+              \ device pin            ( prop-addr prop-len R: swizzledpin )
> -
> -        get-parent encode-int+      \ parent phandle
> -        0 encode-int+ 0 encode-64+  \ parent slot
> -        r> encode-int+              \ parent swizzled pin   ( prop-addr prop-len R: )
> +        pci-addr2dev B lshift       ( prop-addr prop-len parent-slot R: swizzledpin )
> +        encode-int+
> +        \ Parent 64bit BAR (not really used)
> +        0 encode-64+
> +        \ Parent pin
> +        r> encode-int+              ( prop-addr prop-len R: )
>  ;
>
>  : pci-gen-irq-entry ( prop-addr prop-len config-addr -- prop-addr prop-len )

Regards,
Nikunj