From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Tue, 07 Mar 2017 17:27:36 +0100 Subject: [PATCH] ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x In-Reply-To: <20170216163826.28071-1-gregory.clement@free-electrons.com> (Gregory CLEMENT's message of "Thu, 16 Feb 2017 17:38:26 +0100") References: <20170216163826.28071-1-gregory.clement@free-electrons.com> Message-ID: <87k281oxvr.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On jeu., f?vr. 16 2017, Gregory CLEMENT wrote: > The mbus binding had been extended more than two years ago, but the > device tree files for Armada 38x didn't change. > > Adding this third entry will allow the mbus going to suspend which was > the last thing preventing the SoC going to standby mode > > Signed-off-by: Gregory CLEMENT Now applied on mvebu/dt Gregory > --- > arch/arm/boot/dts/armada-38x.dtsi | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi > index c558a5d6a21f..ba27ec104981 100644 > --- a/arch/arm/boot/dts/armada-38x.dtsi > +++ b/arch/arm/boot/dts/armada-38x.dtsi > @@ -360,7 +360,8 @@ > > mbusc: mbus-controller at 20000 { > compatible = "marvell,mbus-controller"; > - reg = <0x20000 0x100>, <0x20180 0x20>; > + reg = <0x20000 0x100>, <0x20180 0x20>, > + <0x20250 0x8>; > }; > > mpic: interrupt-controller at 20a00 { > -- > 2.11.0 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com