* [PATCH] ARM: dts: mvebu: fix reference to a390 spi controller
@ 2016-08-26 15:38 ` Arnd Bergmann
0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2016-08-26 15:38 UTC (permalink / raw)
To: linux-arm-kernel
The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
to a different location in the hierarchy, which breaks the overrides
in the board specific file:
Warning (reg_format): "reg" property in /soc/internal-regs/spi at 10680/spi-flash at 1 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/internal-regs/spi at 10680/spi-flash at 1
This changes the board to reference the spi controller by its label
(which has not changed) rather than the full path.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node")
---
arch/arm/boot/dts/armada-390-db.dts | 60 ++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 9d0d9b2e9bfc..34e279d973c8 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -66,36 +66,6 @@
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
- spi at 10680 {
- status = "okay";
- pinctrl-0 = <&spi1_pins>;
- pinctrl-names = "default";
-
- spi-flash at 1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13",
- "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "U-Boot";
- reg = <0 0x400000>;
- };
- partition at 400000 {
- label = "Filesystem";
- reg = <0x400000 0xc00000>;
- };
- };
- };
- };
-
i2c at 11000 {
status = "okay";
clock-frequency = <100000>;
@@ -173,3 +143,33 @@
};
};
};
+
+&spi1 {
+ status = "okay";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+
+ spi-flash at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13",
+ "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0 0x400000>;
+ };
+ partition at 400000 {
+ label = "Filesystem";
+ reg = <0x400000 0xc00000>;
+ };
+ };
+ };
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] ARM: dts: mvebu: fix reference to a390 spi controller
@ 2016-08-26 15:38 ` Arnd Bergmann
0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2016-08-26 15:38 UTC (permalink / raw)
To: Jason Cooper, Andrew Lunn, Gregory Clement, Sebastian Hesselbarth
Cc: Arnd Bergmann, Stefan Roese, linux-arm-kernel, devicetree,
linux-kernel
The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
to a different location in the hierarchy, which breaks the overrides
in the board specific file:
Warning (reg_format): "reg" property in /soc/internal-regs/spi@10680/spi-flash@1 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/internal-regs/spi@10680/spi-flash@1
This changes the board to reference the spi controller by its label
(which has not changed) rather than the full path.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node")
---
arch/arm/boot/dts/armada-390-db.dts | 60 ++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 9d0d9b2e9bfc..34e279d973c8 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -66,36 +66,6 @@
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
- spi@10680 {
- status = "okay";
- pinctrl-0 = <&spi1_pins>;
- pinctrl-names = "default";
-
- spi-flash@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13",
- "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x400000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x400000 0xc00000>;
- };
- };
- };
- };
-
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
@@ -173,3 +143,33 @@
};
};
};
+
+&spi1 {
+ status = "okay";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13",
+ "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x400000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x400000 0xc00000>;
+ };
+ };
+ };
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] ARM: dts: mvebu: fix reference to a390 spi controller
@ 2016-08-29 9:29 ` Gregory CLEMENT
0 siblings, 0 replies; 5+ messages in thread
From: Gregory CLEMENT @ 2016-08-29 9:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On ven., ao?t 26 2016, Arnd Bergmann <arnd@arndb.de> wrote:
> The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
> to a different location in the hierarchy, which breaks the overrides
> in the board specific file:
>
> Warning (reg_format): "reg" property in /soc/internal-regs/spi at 10680/spi-flash at 1 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/internal-regs/spi at 10680/spi-flash at 1
>
> This changes the board to reference the spi controller by its label
> (which has not changed) rather than the full path.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: 0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node")
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-390-db.dts | 60 ++++++++++++++++++-------------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
> index 9d0d9b2e9bfc..34e279d973c8 100644
> --- a/arch/arm/boot/dts/armada-390-db.dts
> +++ b/arch/arm/boot/dts/armada-390-db.dts
> @@ -66,36 +66,6 @@
> MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
>
> internal-regs {
> - spi at 10680 {
> - status = "okay";
> - pinctrl-0 = <&spi1_pins>;
> - pinctrl-names = "default";
> -
> - spi-flash at 1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "n25q128a13",
> - "jedec,spi-nor";
> - reg = <0>; /* Chip select 0 */
> - spi-max-frequency = <108000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition at 0 {
> - label = "U-Boot";
> - reg = <0 0x400000>;
> - };
> - partition at 400000 {
> - label = "Filesystem";
> - reg = <0x400000 0xc00000>;
> - };
> - };
> - };
> - };
> -
> i2c at 11000 {
> status = "okay";
> clock-frequency = <100000>;
> @@ -173,3 +143,33 @@
> };
> };
> };
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> +
> + spi-flash at 1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a13",
> + "jedec,spi-nor";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <108000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x400000>;
> + };
> + partition at 400000 {
> + label = "Filesystem";
> + reg = <0x400000 0xc00000>;
> + };
> + };
> + };
> +};
> --
> 2.9.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: mvebu: fix reference to a390 spi controller
@ 2016-08-29 9:29 ` Gregory CLEMENT
0 siblings, 0 replies; 5+ messages in thread
From: Gregory CLEMENT @ 2016-08-29 9:29 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, Stefan Roese,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hi Arnd,
On ven., août 26 2016, Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> wrote:
> The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
> to a different location in the hierarchy, which breaks the overrides
> in the board specific file:
>
> Warning (reg_format): "reg" property in /soc/internal-regs/spi@10680/spi-flash@1 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/internal-regs/spi@10680/spi-flash@1
>
> This changes the board to reference the spi controller by its label
> (which has not changed) rather than the full path.
>
> Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Fixes: 0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node")
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-390-db.dts | 60 ++++++++++++++++++-------------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
> index 9d0d9b2e9bfc..34e279d973c8 100644
> --- a/arch/arm/boot/dts/armada-390-db.dts
> +++ b/arch/arm/boot/dts/armada-390-db.dts
> @@ -66,36 +66,6 @@
> MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
>
> internal-regs {
> - spi@10680 {
> - status = "okay";
> - pinctrl-0 = <&spi1_pins>;
> - pinctrl-names = "default";
> -
> - spi-flash@1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "n25q128a13",
> - "jedec,spi-nor";
> - reg = <0>; /* Chip select 0 */
> - spi-max-frequency = <108000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition@0 {
> - label = "U-Boot";
> - reg = <0 0x400000>;
> - };
> - partition@400000 {
> - label = "Filesystem";
> - reg = <0x400000 0xc00000>;
> - };
> - };
> - };
> - };
> -
> i2c@11000 {
> status = "okay";
> clock-frequency = <100000>;
> @@ -173,3 +143,33 @@
> };
> };
> };
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> +
> + spi-flash@1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a13",
> + "jedec,spi-nor";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <108000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "U-Boot";
> + reg = <0 0x400000>;
> + };
> + partition@400000 {
> + label = "Filesystem";
> + reg = <0x400000 0xc00000>;
> + };
> + };
> + };
> +};
> --
> 2.9.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: mvebu: fix reference to a390 spi controller
@ 2016-08-29 9:29 ` Gregory CLEMENT
0 siblings, 0 replies; 5+ messages in thread
From: Gregory CLEMENT @ 2016-08-29 9:29 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, Stefan Roese,
linux-arm-kernel, devicetree, linux-kernel
Hi Arnd,
On ven., août 26 2016, Arnd Bergmann <arnd@arndb.de> wrote:
> The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
> to a different location in the hierarchy, which breaks the overrides
> in the board specific file:
>
> Warning (reg_format): "reg" property in /soc/internal-regs/spi@10680/spi-flash@1 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/internal-regs/spi@10680/spi-flash@1
>
> This changes the board to reference the spi controller by its label
> (which has not changed) rather than the full path.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: 0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node")
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-390-db.dts | 60 ++++++++++++++++++-------------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
> index 9d0d9b2e9bfc..34e279d973c8 100644
> --- a/arch/arm/boot/dts/armada-390-db.dts
> +++ b/arch/arm/boot/dts/armada-390-db.dts
> @@ -66,36 +66,6 @@
> MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
>
> internal-regs {
> - spi@10680 {
> - status = "okay";
> - pinctrl-0 = <&spi1_pins>;
> - pinctrl-names = "default";
> -
> - spi-flash@1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "n25q128a13",
> - "jedec,spi-nor";
> - reg = <0>; /* Chip select 0 */
> - spi-max-frequency = <108000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition@0 {
> - label = "U-Boot";
> - reg = <0 0x400000>;
> - };
> - partition@400000 {
> - label = "Filesystem";
> - reg = <0x400000 0xc00000>;
> - };
> - };
> - };
> - };
> -
> i2c@11000 {
> status = "okay";
> clock-frequency = <100000>;
> @@ -173,3 +143,33 @@
> };
> };
> };
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> +
> + spi-flash@1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a13",
> + "jedec,spi-nor";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <108000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "U-Boot";
> + reg = <0 0x400000>;
> + };
> + partition@400000 {
> + label = "Filesystem";
> + reg = <0x400000 0xc00000>;
> + };
> + };
> + };
> +};
> --
> 2.9.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-08-29 9:29 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-08-26 15:38 [PATCH] ARM: dts: mvebu: fix reference to a390 spi controller Arnd Bergmann
2016-08-26 15:38 ` Arnd Bergmann
2016-08-29 9:29 ` Gregory CLEMENT
2016-08-29 9:29 ` Gregory CLEMENT
2016-08-29 9:29 ` Gregory CLEMENT
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.