From: Kevin Hilman <khilman@deeprootsystems.com>
To: linux-omap@vger.kernel.org
Cc: Chunqiu Wang <cqwang@motorola.com>
Subject: Re: [PATCH -pm] OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOs
Date: Fri, 26 Jun 2009 20:52:04 -0700 [thread overview]
Message-ID: <87k52y9vvf.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1245863619-1222-1-git-send-email-khilman@deeprootsystems.com> (Kevin Hilman's message of "Wed\, 24 Jun 2009 10\:13\:39 -0700")
Kevin Hilman <khilman@deeprootsystems.com> writes:
> From: Chunqiu Wang <cqwang@motorola.com>
>
> According to the GPIO 'Wakeup and Interrupt' section of the TRM[1],
> wake-up requests can only be generated on edge transitions.
>
> Also for OMAP3, only edge GPIOs may lose interrupts when PER enters
> RET/OFF state, this is addressed by gpio prepare|resume idle functions
>
> [1] Section 25.5.3.1 OMAP34xx_ES3.1_TRM_V_Q
>
> Signed-off-by: Chunqiu Wang <cqwang@motorola.com>
> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Pushing to PM branch, and backport to pm-2.6.29.
Kevin
> ---
> arch/arm/plat-omap/gpio.c | 14 ++++++++++++--
> 1 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
> index 8e6f511..de61a13 100644
> --- a/arch/arm/plat-omap/gpio.c
> +++ b/arch/arm/plat-omap/gpio.c
> @@ -684,7 +684,11 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
> trigger & IRQ_TYPE_EDGE_FALLING);
>
> if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
> - if (trigger != 0)
> + /*
> + * GPIO wakeup request can only be generated on edge
> + * transitions
> + */
> + if (trigger & IRQ_TYPE_EDGE_BOTH)
> __raw_writel(1 << gpio, bank->base
> + OMAP24XX_GPIO_SETWKUENA);
> else
> @@ -693,7 +697,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
> }
> /* This part needs to be executed always for OMAP34xx */
> if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
> - if (trigger != 0)
> + /*
> + * Log the edge gpio and manually trigger the IRQ
> + * after resume if the input level changes
> + * to avoid irq lost during PER RET/OFF mode
> + * Applies for omap2 non-wakeup gpio and all omap3 gpios
> + */
> + if (trigger & IRQ_TYPE_EDGE_BOTH)
> bank->enabled_non_wakeup_gpios |= gpio_bit;
> else
> bank->enabled_non_wakeup_gpios &= ~gpio_bit;
> --
> 1.6.3.2
prev parent reply other threads:[~2009-06-27 3:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-24 17:13 [PATCH -pm] OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOs Kevin Hilman
2009-06-27 3:52 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k52y9vvf.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=cqwang@motorola.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.