From: Kalle Valo <kalle.valo@iki.fi>
To: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: ext Tony Lindgren <tony@atomide.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: Re: Git tree updated, clocks and PM code reset to mainline
Date: Sat, 04 Apr 2009 08:27:19 +0300 [thread overview]
Message-ID: <87k561htu0.fsf@litku.valot.fi> (raw)
In-Reply-To: <20090403091553.82ceacf8.jarkko.nikula@nokia.com> (Jarkko Nikula's message of "Fri\, 3 Apr 2009 09\:15\:53 +0300")
Jarkko Nikula <jarkko.nikula@nokia.com> writes:
> On Fri, 3 Apr 2009 02:13:33 +0200
> ext Tony Lindgren <tony@atomide.com> wrote:
>
>> This means that the PM and some clock features will be broken until
>> we can merge in Paul's clock branch and Kevin's pm branch.
>>
>> Please everybody take a look at the big commit that resets the code,
>> it's commit eba05254cb561dc27d5664503f91f7c21954e648. I've made sure
>> things build for all omap configs, and booted several boards. But I
>> may have accidentally left out something critical too..
>>
> Just a test report. N810 is not booting anymore due an oops and Beagle
> hangs when calibrating the delay loop.
>
> Both using their defconfigs + CONFIG_DEBUG_LL=y. N810 boot log below.
I see the same with N800, same configs as Jarkko had:
<6>SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
32512
<5>Kernel command line: root=1f03 rootfstype=jffs2
<6>NR_IRQS:368
<1>Unable to handle kernel NULL pointer dereference at virtual address
00000000
<1>pgd = c0004000
<1>[00000000] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0 Not tainted (2.6.29-omap1 #118)
PC is at propagate_rate+0x34/0x54
LR is at omap2_clk_init+0x28/0x1c8
pc : [<c003494c>] lr : [<c000dd0c>] psr: 400001d3
sp : c0313f90 ip : 00000003 fp : 00000000
r10: 80021a04 r9 : 4107b362 r8 : 80021a38
r7 : c0315c60 r6 : c0023ee8 r5 : c0317288 r4 : ffffffe0
r3 : 00000000 r2 : c0317268 r1 : 00000040 r0 : c0317288
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 00c5387f Table: 80004000 DAC: 00000017
Process swapper (pid: 0, stack limit = 0xc0312260)
Stack: (0xc0313f90 to 0xc0314000)
3f80: c0316cc8 c03172e8 c0023ee8
c000dd0c
3fa0: 00000000 00000001 00000000 c0339000 c0023ee8 c0315c60 80021a38
c000d5c0
3fc0: c0023eec c000e3d4 c0023eec c000b110 c0023eec c00089c8 c00084bc
00000000
3fe0: 00000000 c0023eec 00000000 00c5387d c0339120 80008034 00000000
00000000
[<c003494c>] (propagate_rate+0x34/0x54) from [<c000dd0c>]
(omap2_clk_init+0x28/0
x1c8)
[<c000dd0c>] (omap2_clk_init+0x28/0x1c8) from [<c000d5c0>]
(omap2_init_common_hw
+0x20/0x38)
[<c000d5c0>] (omap2_init_common_hw+0x20/0x38) from [<c000e3d4>]
(nokia_n800_init
_irq+0xc/0x50)
[<c000e3d4>] (nokia_n800_init_irq+0xc/0x50) from [<c000b110>]
(init_IRQ+0x30/0x4
0)
[<c000b110>] (init_IRQ+0x30/0x40) from [<c00089c8>]
(start_kernel+0x120/0x288)
[<c00089c8>] (start_kernel+0x120/0x288) from [<80008034>] (0x80008034)
Code: e1a00004 ebfffff4 e5943020 e2434020 (e5943020)
<4>---[ end trace 1b75b31a2719ed1c ]---
<0>Kernel panic - not syncing: Attempted to kill the idle task!
[<c002c5e4>] (unwind_backtrace+0x0/0xe0) from [<c004abb8>]
(panic+0x40/0x110)
[<c004abb8>] (panic+0x40/0x110) from [<c004d4d4>] (do_exit+0x60/0x644)
[<c004d4d4>] (do_exit+0x60/0x644) from [<c002ab70>] (die+0x12c/0x14c)
[<c002ab70>] (die+0x12c/0x14c) from [<c002d450>]
(__do_kernel_fault+0x64/0x74)
[<c002d450>] (__do_kernel_fault+0x64/0x74) from [<c002d65c>]
(do_page_fault+0x1f
c/0x218)
[<c002d65c>] (do_page_fault+0x1fc/0x218) from [<c002620c>]
(do_DataAbort+0x34/0x
98)
[<c002620c>] (do_DataAbort+0x34/0x98) from [<c002692c>]
(__dabt_svc+0x4c/0x60)
Exception stack(0xc0313f48 to 0xc0313f90)
3f40: c0317288 00000040 c0317268 00000000 ffffffe0
c0317288
3f60: c0023ee8 c0315c60 80021a38 4107b362 80021a04 00000000 00000003
c0313f90
3f80: c000dd0c c003494c 400001d3 ffffffff
[<c002692c>] (__dabt_svc+0x4c/0x60) from [<c000dd0c>]
(omap2_clk_init+0x28/0x1c8
)
[<c000dd0c>] (omap2_clk_init+0x28/0x1c8) from [<c0339000>]
(0xc0339000)
--
Kalle Valo
next prev parent reply other threads:[~2009-04-04 5:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-03 0:13 Git tree updated, clocks and PM code reset to mainline Tony Lindgren
2009-04-03 6:15 ` Jarkko Nikula
2009-04-03 15:13 ` Tony Lindgren
2009-04-04 5:27 ` Kalle Valo [this message]
2009-04-04 22:33 ` Paul Walmsley
2009-04-06 6:29 ` Jarkko Nikula
2009-04-06 10:49 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k561htu0.fsf@litku.valot.fi \
--to=kalle.valo@iki.fi \
--cc=jarkko.nikula@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.