All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>, kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, "Radim Krčmář" <rkrcmar@redhat.com>,
	"Joerg Roedel" <joro@8bytes.org>,
	"Jim Mattson" <jmattson@google.com>
Subject: Re: [PATCH RFC 4/5] x86: KVM: add xsetbv to the emulator
Date: Wed, 31 Jul 2019 15:07:24 +0200	[thread overview]
Message-ID: <87lfwe73oz.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <a86ca8b7-0333-398b-7bf6-90cb79366226@redhat.com>

Paolo Bonzini <pbonzini@redhat.com> writes:

> On 20/06/19 13:02, Vitaly Kuznetsov wrote:
>> To avoid hardcoding xsetbv length to '3' we need to support decoding it in
>> the emulator.
>> 
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>
> Can you also emulate it properly?  The code from QEMU's
> target/i386/fpu_helper.c can help. :)
>

(Had a chance to get back to this just now, sorry)

Assuming __kvm_set_xcr() is also a correct implementation, would the
code below do the job? (Just trying to figure out why you suggested
me to take a look at QEMU's variant):

diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index feab24cac610..77cf6c11f66b 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -229,7 +229,7 @@ struct x86_emulate_ops {
 	int (*pre_leave_smm)(struct x86_emulate_ctxt *ctxt,
 			     const char *smstate);
 	void (*post_leave_smm)(struct x86_emulate_ctxt *ctxt);
-
+	int (*set_xcr)(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr);
 };
 
 typedef u32 __attribute__((vector_size(16))) sse128_t;
@@ -429,6 +429,7 @@ enum x86_intercept {
 	x86_intercept_ins,
 	x86_intercept_out,
 	x86_intercept_outs,
+	x86_intercept_xsetbv,
 
 	nr_x86_intercepts
 };
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 718f7d9afedc..f9e843dd992a 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -4156,6 +4156,20 @@ static int em_fxrstor(struct x86_emulate_ctxt *ctxt)
 	return rc;
 }
 
+static int em_xsetbv(struct x86_emulate_ctxt *ctxt)
+{
+	u32 eax, ecx, edx;
+
+	eax = reg_read(ctxt, VCPU_REGS_RAX);
+	edx = reg_read(ctxt, VCPU_REGS_RDX);
+	ecx = reg_read(ctxt, VCPU_REGS_RCX);
+
+	if (ctxt->ops->set_xcr(ctxt, ecx, ((u64)edx << 32) | eax))
+		return emulate_gp(ctxt, 0);
+
+	return X86EMUL_CONTINUE;
+}
+
 static bool valid_cr(int nr)
 {
 	switch (nr) {
@@ -4409,6 +4423,12 @@ static const struct opcode group7_rm1[] = {
 	N, N, N, N, N, N,
 };
 
+static const struct opcode group7_rm2[] = {
+	N,
+	II(ImplicitOps | Priv,			em_xsetbv,	xsetbv),
+	N, N, N, N, N, N,
+};
+
 static const struct opcode group7_rm3[] = {
 	DIP(SrcNone | Prot | Priv,		vmrun,		check_svme_pa),
 	II(SrcNone  | Prot | EmulateOnUD,	em_hypercall,	vmmcall),
@@ -4498,7 +4518,8 @@ static const struct group_dual group7 = { {
 }, {
 	EXT(0, group7_rm0),
 	EXT(0, group7_rm1),
-	N, EXT(0, group7_rm3),
+	EXT(0, group7_rm2),
+	EXT(0, group7_rm3),
 	II(SrcNone | DstMem | Mov,		em_smsw, smsw), N,
 	II(SrcMem16 | Mov | Priv,		em_lmsw, lmsw),
 	EXT(0, group7_rm7),
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c6d951cbd76c..9512cc38dfe9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6068,6 +6068,11 @@ static void emulator_post_leave_smm(struct x86_emulate_ctxt *ctxt)
 	kvm_smm_changed(emul_to_vcpu(ctxt));
 }
 
+static int emulator_set_xcr(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr)
+{
+	return __kvm_set_xcr(emul_to_vcpu(ctxt), index, xcr);
+}
+
 static const struct x86_emulate_ops emulate_ops = {
 	.read_gpr            = emulator_read_gpr,
 	.write_gpr           = emulator_write_gpr,
@@ -6109,6 +6114,7 @@ static const struct x86_emulate_ops emulate_ops = {
 	.set_hflags          = emulator_set_hflags,
 	.pre_leave_smm       = emulator_pre_leave_smm,
 	.post_leave_smm      = emulator_post_leave_smm,
+	.set_xcr             = emulator_set_xcr,
 };
 
 static void toggle_interruptibility(struct kvm_vcpu *vcpu, u32 mask)

-- 
Vitaly

  reply	other threads:[~2019-07-31 13:07 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-20 11:02 [PATCH RFC 0/5] x86/KVM/svm: get rid of hardcoded instructions lengths Vitaly Kuznetsov
2019-06-20 11:02 ` [PATCH RFC 1/5] x86: KVM: svm: don't pretend to advance RIP in case wrmsr_interception() results in #GP Vitaly Kuznetsov
2019-06-20 18:49   ` Jim Mattson
2019-06-21  8:42     ` Vitaly Kuznetsov
2019-06-20 11:02 ` [PATCH RFC 2/5] x86: KVM: svm: avoid flooding logs when skip_emulated_instruction() fails Vitaly Kuznetsov
2019-06-20 18:45   ` Jim Mattson
2019-06-20 11:02 ` [PATCH RFC 3/5] x86: KVM: svm: clear interrupt shadow on all paths in skip_emulated_instruction() Vitaly Kuznetsov
2019-06-20 18:44   ` Jim Mattson
2019-06-21  8:43     ` Vitaly Kuznetsov
2019-07-31 13:50     ` Vitaly Kuznetsov
2019-07-31 16:37       ` Paolo Bonzini
2019-07-31 20:27         ` Jim Mattson
2019-07-31 23:37           ` Sean Christopherson
2019-07-31 23:45             ` Jim Mattson
2019-07-31 23:56               ` Sean Christopherson
2019-08-01  0:13                 ` Paolo Bonzini
2019-08-01  0:17                   ` Jim Mattson
2019-06-20 11:02 ` [PATCH RFC 4/5] x86: KVM: add xsetbv to the emulator Vitaly Kuznetsov
2019-06-20 12:18   ` Paolo Bonzini
2019-07-31 13:07     ` Vitaly Kuznetsov [this message]
2019-07-31 13:14       ` Paolo Bonzini
2019-06-20 11:02 ` [PATCH RFC 5/5] x86: KVM: svm: remove hardcoded instruction length from intercepts Vitaly Kuznetsov
2019-06-20 18:41   ` Jim Mattson
2019-06-20 12:14 ` [PATCH RFC 0/5] x86/KVM/svm: get rid of hardcoded instructions lengths Paolo Bonzini
2019-06-20 12:26   ` Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87lfwe73oz.fsf@vitty.brq.redhat.com \
    --to=vkuznets@redhat.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.