From: Vagrant Cascadian <vagrant@debian.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
Date: Mon, 13 May 2019 09:25:00 -0700 [thread overview]
Message-ID: <87lfzae2zn.fsf@yucca> (raw)
In-Reply-To: <20190508063435.3796-6-matwey.kornilov@gmail.com>
On 2019-05-08, Matwey V. Kornilov wrote:
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> ---
> configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 configs/rock64-rk3328_defconfig
Thanks for submitting these patches upstream!
Unfortunately, I wasn't able to get this to boot off of microSD.
What process do you use to test this? Does it depend on patches not
present in 2019.07-rc1 or not yet merged?
The process I tried after building upstream arm-trusted-firmware 2.1:
mkimage -T rksd -n rk3328 -d spl/u-boot-spl.bin u-boot-spl.rksd
dd if=u-boot-spl.rksd of=/dev/sdb seek=64
dd if=u-boot.itb of=/dev/sdb seek=16384
There was no output on the serial console, either at 1500000 or 115200.
live well,
vagrant
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..b278315035
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190513/41ddc8ef/attachment.sig>
next prev parent reply other threads:[~2019-05-13 16:25 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-08 6:34 [U-Boot] [PATCH 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
2019-05-08 6:34 ` [U-Boot] [PATCH 1/5] rockchip: rk3328: add spl board file support Matwey V. Kornilov
2019-05-18 16:08 ` Simon Glass
2019-05-08 6:34 ` [U-Boot] [PATCH 2/5] rockchip: rk3328: add config option for SPL Matwey V. Kornilov
2019-05-18 16:08 ` Simon Glass
2019-05-08 6:34 ` [U-Boot] [PATCH 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-05-18 16:08 ` Simon Glass
2019-05-08 6:34 ` [U-Boot] [PATCH 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-05-16 6:56 ` Kever Yang
2019-05-19 12:11 ` Matwey V. Kornilov
2019-05-08 6:34 ` [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-05-13 16:25 ` Vagrant Cascadian [this message]
2019-05-13 22:59 ` Vagrant Cascadian
2019-05-13 23:13 ` Vagrant Cascadian
2019-05-14 9:41 ` Matwey V. Kornilov
2019-05-16 7:00 ` Kever Yang
2019-05-19 12:11 ` Matwey V. Kornilov
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
2019-05-19 12:10 ` [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-05-30 1:13 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support Matwey V. Kornilov
2019-05-30 1:13 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-05-30 1:24 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-05-30 1:25 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-05-20 17:11 ` Vagrant Cascadian
2019-05-20 17:22 ` Matwey V. Kornilov
2019-05-20 18:15 ` Vagrant Cascadian
2019-05-22 16:59 ` Matwey V. Kornilov
2019-05-30 1:26 ` Kever Yang
2019-05-30 1:23 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Kever Yang
2019-05-31 0:37 ` Kever Yang
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-06-04 7:42 ` Kever Yang
2019-06-04 11:48 ` Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
2019-06-04 2:48 ` Kever Yang
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-06-18 7:47 ` Kever Yang
2019-06-08 21:27 ` [U-Boot] [PATCH v4 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lfzae2zn.fsf@yucca \
--to=vagrant@debian.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.