From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/9] arm64: dts: marvell: cp110: add PPv2 port interrupts
Date: Wed, 20 Sep 2017 14:47:57 +0200 [thread overview]
Message-ID: <87lgl9pmde.fsf@free-electrons.com> (raw)
In-Reply-To: <20170918075814.27405-8-antoine.tenart@free-electrons.com> (Antoine Tenart's message of "Mon, 18 Sep 2017 09:58:12 +0200")
Hi Antoine,
On lun., sept. 18 2017, Antoine Tenart <antoine.tenart@free-electrons.com> wrote:
> Ports interrupts are used by the PPv2 driver when no PHY is connected to
> a port. This patch adds a description of these interrupts.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> Tested-by: Marcin Wojtas <mw@semihalf.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 15 +++++++++------
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 15 +++++++++------
> 2 files changed, 18 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index a26948ff72b4..b1119c541f16 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -74,9 +74,10 @@
> <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
> - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
> + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
> - "tx-cpu3", "rx-shared";
> + "tx-cpu3", "rx-shared", "link";
> port-id = <0>;
> gop-port-id = <0>;
> status = "disabled";
> @@ -87,9 +88,10 @@
> <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
> - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
> + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
> - "tx-cpu3", "rx-shared";
> + "tx-cpu3", "rx-shared", "link";
> port-id = <1>;
> gop-port-id = <2>;
> status = "disabled";
> @@ -100,9 +102,10 @@
> <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
> - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
> + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
> - "tx-cpu3", "rx-shared";
> + "tx-cpu3", "rx-shared", "link";
> port-id = <2>;
> gop-port-id = <3>;
> status = "disabled";
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index fe326074edb6..497d233d6c47 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -74,9 +74,10 @@
> <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
> - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
> + <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
> - "tx-cpu3", "rx-shared";
> + "tx-cpu3", "rx-shared", "link";
> port-id = <0>;
> gop-port-id = <0>;
> status = "disabled";
> @@ -87,9 +88,10 @@
> <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
> - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
> + <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
> - "tx-cpu3", "rx-shared";
> + "tx-cpu3", "rx-shared", "link";
> port-id = <1>;
> gop-port-id = <2>;
> status = "disabled";
> @@ -100,9 +102,10 @@
> <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
> <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
> - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
> + <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
> + <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
> - "tx-cpu3", "rx-shared";
> + "tx-cpu3", "rx-shared", "link";
> port-id = <2>;
> gop-port-id = <3>;
> status = "disabled";
> --
> 2.13.5
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-09-20 12:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-18 7:58 [PATCH 0/9] arm64: marvell: 7k/8k: improve network support Antoine Tenart
2017-09-18 7:58 ` [PATCH 1/9] arm64: defconfig: enable the Marvell 10G PHY as a module Antoine Tenart
2017-09-20 12:30 ` Gregory CLEMENT
2017-09-18 7:58 ` [PATCH 2/9] arm64: defconfig: enable Marvell CP110 comphy Antoine Tenart
2017-09-20 12:31 ` Gregory CLEMENT
2017-09-18 7:58 ` [PATCH 3/9] arm64: dts: marvell: extend the cp110 syscon register area length Antoine Tenart
2017-09-20 12:46 ` Gregory CLEMENT
2017-09-18 7:58 ` [PATCH 4/9] arm64: dts: marvell: add comphy nodes on cp110 master and slave Antoine Tenart
2017-09-20 12:47 ` Gregory CLEMENT
2017-09-18 7:58 ` [PATCH 5/9] arm64: dts: marvell: mcbin: add comphy references to Ethernet ports Antoine Tenart
2017-09-18 8:50 ` Baruch Siach
2017-09-18 9:44 ` Antoine Tenart
2017-09-18 13:04 ` Andrew Lunn
2017-09-18 13:52 ` Antoine Tenart
2017-09-18 16:32 ` Andrew Lunn
2017-09-18 7:58 ` [PATCH 6/9] arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port Antoine Tenart
2017-09-18 7:58 ` [PATCH 7/9] arm64: dts: marvell: cp110: add PPv2 port interrupts Antoine Tenart
2017-09-20 12:47 ` Gregory CLEMENT [this message]
2017-09-18 7:58 ` [PATCH 8/9] arm64: dts: marvell: 7040-db: enable the SFP port Antoine Tenart
2017-09-18 7:58 ` [PATCH 9/9] arm64: dts: marvell: 8040-db: enable the SFP ports Antoine Tenart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lgl9pmde.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.