From: Takashi Iwai <tiwai@suse.de>
To: Baul Lee <baul.lee@xbow.com>
Cc: perex@perex.cz, tiwai@suse.com, linux-sound@vger.kernel.org,
linux-kernel@vger.kernel.org, federico.kirschbaum@xbow.com,
stable@vger.kernel.org
Subject: Re: [PATCH] ALSA: 6fire: bound the MIDI event length from the device
Date: Wed, 05 Aug 2026 09:33:51 +0200 [thread overview]
Message-ID: <87mrv1ggww.wl-tiwai@suse.de> (raw)
In-Reply-To: <20260805013423.38175-1-baul.lee@xbow.com>
On Wed, 05 Aug 2026 03:34:23 +0200,
Baul Lee wrote:
>
> usb6fire_comm_receiver_handler() forwards a MIDI event using a length
> byte the device supplies, with no bound and no check that the transfer
> delivered that many bytes:
>
> if (!urb->status) {
> if (rt->receiver_buffer[0] == 0x10) /* midi in event */
> if (midi_rt)
> midi_rt->in_received(midi_rt,
> rt->receiver_buffer + 2,
> rt->receiver_buffer[1]);
> }
>
> receiver_buffer is a 64-byte kzalloc() buffer (COMM_RECEIVER_BUFSIZE), so
> only 62 bytes follow the two-byte header. receiver_buffer[1] is a u8 the
> device chooses, so a device that answers with 0x10 and a length of 0xFF
> makes snd_rawmidi_receive() read 255 bytes starting two bytes into a
> 64-byte object. The bytes past the buffer are handed to userspace
> through the rawmidi read path.
>
> urb->actual_length is not consulted either, so a short transfer leaves
> both the type byte and the length byte at their previous values and the
> handler acts on stale data.
>
> The receiver URB is submitted from usb6fire_comm_init() at probe, so the
> read happens on plug with no user action; forwarding to userspace also
> needs a MIDI input substream open, since usb6fire_midi_in_received()
> only calls snd_rawmidi_receive() when rt->in is set.
>
> KASAN on 7.2.0-rc5 (arm64), single packet from an emulated device:
>
> BUG: KASAN: slab-out-of-bounds in snd_rawmidi_receive
> Read of size 255 at addr ffff000009f64682 by task bash/183
> __asan_memcpy
> snd_rawmidi_receive
> usb6fire_midi_in_received [snd_usb_6fire]
> usb6fire_comm_receiver_handler [snd_usb_6fire]
> Allocated by task 11:
> usb6fire_comm_init [snd_usb_6fire]
> usb6fire_chip_probe [snd_usb_6fire]
> The buggy address is located 2 bytes inside of
> allocated 64-byte region [ffff000009f64680, ffff000009f646c0)
>
> Reject the event when the length exceeds the bytes that follow the
> header, and require the transfer to have delivered the header plus that
> many bytes. The receiver URB is submitted with a 64-byte
> transfer_buffer_length, so a genuine device cannot deliver an event
> longer than those 62 bytes and nothing valid is dropped.
>
> Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
>
> Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
> Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
> Reported-by: Baul Lee <baul.lee@xbow.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Baul Lee <baul.lee@xbow.com>
Applied to for-next branch now. Thanks.
Takashi
prev parent reply other threads:[~2026-08-05 7:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 1:34 [PATCH] ALSA: 6fire: bound the MIDI event length from the device Baul Lee
2026-08-05 7:33 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mrv1ggww.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=baul.lee@xbow.com \
--cc=federico.kirschbaum@xbow.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.