Re: [PATCH v2 2/4] ASoC: es8316: Enable support for MCLK div by 2

[Marian Postevca <posteuca@mutex.one>]

Mark Brown <broonie@kernel.org> writes:


> Given that the datasheet quotes a maximum MCLK of 51.2MHz I suspect that
> this is far too high and that performance is degrading well before this
> point, it sounds like it just so happens that you noticed issues on a
> machine with this MCLK rather than that's based on the spec.  I would
> instead suggest applying the MCLK divider in any case where we can do so
> and still generate suitable clocking for the rest of the system, or at
> least hit 256fs (the datasheet quotes 256/384fs on the front page which
> suggests it's targetting 256fs, that'd be a fairly normal number, and
> there's mention of 12/24MHz USB clocks being directly usable).  Doing
> this should either make no odds or result in better performance.

Not 100% sure what checks should be done for a MCLK to determine if it
generates suitable clocking. Would something along this patch make
sense?

diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index a8f347f1affb..667648de8105 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -470,19 +470,36 @@ static int es8316_pcm_hw_params(struct snd_pcm_substream *substream,
 	u8 bclk_divider;
 	u16 lrck_divider;
 	int i;
+	unsigned int clk = es8316->sysclk / 2;
+	bool clk_valid = false;
+
+	do {
+		/* Validate supported sample rates that are autodetected from MCLK */
+		for (i = 0; i < NR_SUPPORTED_MCLK_LRCK_RATIOS; i++) {
+			const unsigned int ratio = supported_mclk_lrck_ratios[i];
+
+			if (clk % ratio != 0)
+				continue;
+			if (clk / ratio == params_rate(params))
+				break;
+		}
+		if (i == NR_SUPPORTED_MCLK_LRCK_RATIOS) {
+			if (clk == es8316->sysclk)
+				return -EINVAL;
+			else
+				clk = es8316->sysclk;
+		} else {
+			clk_valid = true;
+		}
+	} while(!clk_valid);
 
-	/* Validate supported sample rates that are autodetected from MCLK */
-	for (i = 0; i < NR_SUPPORTED_MCLK_LRCK_RATIOS; i++) {
-		const unsigned int ratio = supported_mclk_lrck_ratios[i];
-
-		if (es8316->sysclk % ratio != 0)
-			continue;
-		if (es8316->sysclk / ratio == params_rate(params))
-			break;
+	if (clk != es8316->sysclk) {
+		snd_soc_component_update_bits(component, ES8316_CLKMGR_CLKSW,
+					      ES8316_CLKMGR_CLKSW_MCLK_DIV,
+					      ES8316_CLKMGR_CLKSW_MCLK_DIV);
 	}
-	if (i == NR_SUPPORTED_MCLK_LRCK_RATIOS)
-		return -EINVAL;
-	lrck_divider = es8316->sysclk / params_rate(params);
+
+	lrck_divider = clk / params_rate(params);
 	bclk_divider = lrck_divider / 4;
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE: