All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 3/9] drm/i915: Extract intel_disable_ddi_buf()
Date: Wed, 11 Oct 2017 22:53:14 +0300	[thread overview]
Message-ID: <87mv4xo40l.fsf@intel.com> (raw)
In-Reply-To: <20171010121207.570-4-ville.syrjala@linux.intel.com>

On Tue, 10 Oct 2017, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Extract the code to disable the DDI_BUF_CTL into small helper. This
> will allows us to detangle the encoder type mess in
> intel_ddi_post_disable().
>
> v2: Keep using intel_ddi_get_encoder_port() for now
>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1

Holds for v2

> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c | 41 +++++++++++++++++++++++-----------------
>  1 file changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 1cc61ba48e3a..e4d1d934231b 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2257,17 +2257,37 @@ static void intel_ddi_pre_enable(struct intel_encoder *encoder,
>  	}
>  }
>  
> +static void intel_disable_ddi_buf(struct intel_encoder *encoder)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	enum port port = intel_ddi_get_encoder_port(encoder);
> +	bool wait = false;
> +	u32 val;
> +
> +	val = I915_READ(DDI_BUF_CTL(port));
> +	if (val & DDI_BUF_CTL_ENABLE) {
> +		val &= ~DDI_BUF_CTL_ENABLE;
> +		I915_WRITE(DDI_BUF_CTL(port), val);
> +		wait = true;
> +	}
> +
> +	val = I915_READ(DP_TP_CTL(port));
> +	val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
> +	val |= DP_TP_CTL_LINK_TRAIN_PAT1;
> +	I915_WRITE(DP_TP_CTL(port), val);
> +
> +	if (wait)
> +		intel_wait_ddi_buf_idle(dev_priv, port);
> +}
> +
>  static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,
>  				   const struct intel_crtc_state *old_crtc_state,
>  				   const struct drm_connector_state *old_conn_state)
>  {
>  	struct drm_encoder *encoder = &intel_encoder->base;
>  	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
> -	enum port port = intel_ddi_get_encoder_port(intel_encoder);
>  	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
>  	int type = intel_encoder->type;
> -	uint32_t val;
> -	bool wait = false;
>  
>  	if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) {
>  		/*
> @@ -2286,20 +2306,7 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,
>  			intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
>  	}
>  
> -	val = I915_READ(DDI_BUF_CTL(port));
> -	if (val & DDI_BUF_CTL_ENABLE) {
> -		val &= ~DDI_BUF_CTL_ENABLE;
> -		I915_WRITE(DDI_BUF_CTL(port), val);
> -		wait = true;
> -	}
> -
> -	val = I915_READ(DP_TP_CTL(port));
> -	val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
> -	val |= DP_TP_CTL_LINK_TRAIN_PAT1;
> -	I915_WRITE(DP_TP_CTL(port), val);
> -
> -	if (wait)
> -		intel_wait_ddi_buf_idle(dev_priv, port);
> +	intel_disable_ddi_buf(intel_encoder);
>  
>  	if (type == INTEL_OUTPUT_HDMI) {
>  		dig_port->set_infoframes(encoder, false,

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-10-11 19:53 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-10 12:11 [PATCH v2 0/9] drm/i915: Cleaner DDI DP vs. HDMI split Ville Syrjala
2017-10-10 12:11 ` [PATCH v2 1/9] drm/i915: Dump 'output_types' in crtc state dump Ville Syrjala
2017-10-11 19:50   ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 2/9] drm/i915: Extract intel_ddi_clk_disable() Ville Syrjala
2017-10-11 19:52   ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 3/9] drm/i915: Extract intel_disable_ddi_buf() Ville Syrjala
2017-10-11 19:53   ` Jani Nikula [this message]
2017-10-10 12:12 ` [PATCH 4/9] drm/i915: Inline the required bits of intel_ddi_post_disable() into intel_ddi_fdi_post_disable() Ville Syrjala
2017-10-10 12:12 ` [PATCH v2 5/9] drm/i915: Split intel_ddi_post_disable() into DP vs. HDMI variants Ville Syrjala
2017-10-10 12:12 ` [PATCH 6/9] drm/i915: Remove useless eDP check from intel_ddi_pre_enable_dp() Ville Syrjala
2017-10-10 12:12 ` [PATCH 7/9] drm/i915: Split intel_disable_ddi() into DP vs. HDMI variants Ville Syrjala
2017-10-11 20:03   ` Jani Nikula
2017-10-12  9:49     ` Ville Syrjälä
2017-10-13 14:13       ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 8/9] drm/i915: Plumb crtc_state etc. directly to intel_ddi_pre_enable_{dp, hdmi}() Ville Syrjala
2017-10-13 14:25   ` Jani Nikula
2017-10-10 12:12 ` [PATCH v2 9/9] drm/i915: Split intel_enable_ddi() into DP and HDMI variants Ville Syrjala
2017-10-11 20:06   ` Jani Nikula
2017-10-13 14:20     ` Jani Nikula
2017-10-13 18:10       ` Ville Syrjälä
2017-10-10 13:07 ` ✗ Fi.CI.BAT: warning for drm/i915: Cleaner DDI DP vs. HDMI split Patchwork
2017-10-10 13:21   ` Ville Syrjälä
2017-10-13 17:03 ` ✓ Fi.CI.BAT: success " Patchwork
2017-10-13 18:16   ` Ville Syrjälä
2017-10-13 18:49     ` Jani Nikula
2017-10-14  0:10 ` ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87mv4xo40l.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.