From: "Toke Høiland-Jørgensen" <toke@toke.dk>
To: Jason Andryuk <jandryuk@gmail.com>
Cc: make-wifi-fast@lists.bufferbloat.net,
"linux-wireless\@vger.kernel.org"
<linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v5] mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue.
Date: Fri, 02 Sep 2016 11:27:12 +0200 [thread overview]
Message-ID: <87mvjq649b.fsf@toke.dk> (raw)
In-Reply-To: <CAKf6xptJrniYA3Q2pYN4DkpKf_30dNJTdHqm+jCM=enDRSQhJQ@mail.gmail.com> (Jason Andryuk's message of "Thu, 1 Sep 2016 22:48:50 -0400")
Jason Andryuk <jandryuk@gmail.com> writes:
> On Thu, Sep 1, 2016 at 12:03 PM, Toke H=C3=B8iland-J=C3=B8rgensen <toke@t=
oke.dk> wrote:
>> @@ -1481,33 +1506,57 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee=
80211_hw *hw,
>> {
>> struct ieee80211_local *local =3D hw_to_local(hw);
>> struct txq_info *txqi =3D container_of(txq, struct txq_info, txq=
);
>> - struct ieee80211_hdr *hdr;
>> struct sk_buff *skb =3D NULL;
>> struct fq *fq =3D &local->fq;
>> struct fq_tin *tin =3D &txqi->tin;
>> + struct ieee80211_tx_info *info;
>>
>> spin_lock_bh(&fq->lock);
>>
>> if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags))
>> goto out;
>>
>> +begin:
>> skb =3D fq_tin_dequeue(fq, tin, fq_tin_dequeue_func);
>> if (!skb)
>> goto out;
>>
>> ieee80211_set_skb_vif(skb, txqi);
>>
>> - hdr =3D (struct ieee80211_hdr *)skb->data;
>> - if (txq->sta && ieee80211_is_data_qos(hdr->frame_control)) {
>> + info =3D IEEE80211_SKB_CB(skb);
>> + if (txq->sta && info->control.flags & IEEE80211_TX_CTRL_FAST_XMI=
T) {
>> struct sta_info *sta =3D container_of(txq->sta, struct s=
ta_info,
>> sta);
>> - struct ieee80211_tx_info *info =3D IEEE80211_SKB_CB(skb);
>> + struct ieee80211_fast_tx *fast_tx;
>>
>> - hdr->seq_ctrl =3D ieee80211_tx_next_seq(sta, txq->tid);
>> - if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags))
>> - info->flags |=3D IEEE80211_TX_CTL_AMPDU;
>> - else
>> - info->flags &=3D ~IEEE80211_TX_CTL_AMPDU;
>> + fast_tx =3D rcu_dereference(sta->fast_tx);
>> + if (WARN_ON(!fast_tx)) {
>> + /* lost the fast_tx pointer while the packet was=
queued */
>> + ieee80211_free_txskb(hw, skb);
>> + goto begin;
>> + }
>> + ieee80211_xmit_fast_finish(sta->sdata, sta, fast_tx, skb=
, false);
>> + } else {
>> + struct ieee80211_tx_data tx =3D { };
>> +
>> + __skb_queue_head_init(&tx.skbs);
>> + tx.local =3D local;
>> + if (txq->sta) {
>> + struct sta_info *sta =3D container_of(txq->sta,
>> + struct sta_i=
nfo,
>> + sta);
>
> sta is unneeded give the assignment below?
Yeah, you're right. Think that was left over from a previous version.
Thanks for spotting it :)
-Toke
next prev parent reply other threads:[~2016-09-02 9:38 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 12:58 [PATCH] mac80211: Move crypto IV generation to after TXQ dequeue Toke Høiland-Jørgensen
2016-08-17 13:08 ` Johannes Berg
2016-08-17 13:16 ` Toke Høiland-Jørgensen
2016-08-17 13:18 ` Johannes Berg
2016-08-17 13:23 ` Toke Høiland-Jørgensen
2016-08-17 14:45 ` [PATCH v2] " Toke Høiland-Jørgensen
2016-08-17 19:49 ` Johannes Berg
2016-08-17 20:07 ` [Make-wifi-fast] " Dave Taht
2016-08-17 20:43 ` Johannes Berg
2016-08-22 14:47 ` Toke Høiland-Jørgensen
2016-08-26 8:38 ` Johannes Berg
2016-08-26 8:54 ` Toke Høiland-Jørgensen
2016-08-24 16:20 ` [PATCH v3] mac80211: Move reorder-sensitive TX handlers " Toke Høiland-Jørgensen
2016-08-30 13:15 ` [PATCH v4] " Toke Høiland-Jørgensen
2016-08-31 21:06 ` Johannes Berg
2016-09-01 8:23 ` Toke Høiland-Jørgensen
2016-09-01 8:34 ` Johannes Berg
2016-09-01 8:38 ` Toke Høiland-Jørgensen
2016-09-01 9:07 ` Johannes Berg
2016-09-01 9:20 ` Toke Høiland-Jørgensen
2016-09-01 9:27 ` Johannes Berg
2016-09-01 9:42 ` Toke Høiland-Jørgensen
2016-09-01 16:03 ` [PATCH v5] " Toke Høiland-Jørgensen
2016-09-01 17:59 ` Johannes Berg
2016-09-01 18:30 ` Toke Høiland-Jørgensen
2016-09-01 18:35 ` Johannes Berg
2016-09-02 2:48 ` Jason Andryuk
2016-09-02 9:27 ` Toke Høiland-Jørgensen [this message]
2016-09-02 13:41 ` [PATCH v6] " Toke Høiland-Jørgensen
2016-09-02 14:44 ` Toke Høiland-Jørgensen
2016-09-05 11:30 ` [PATCH v7] " Toke Høiland-Jørgensen
2016-09-05 17:49 ` Felix Fietkau
2016-09-05 17:59 ` Toke Høiland-Jørgensen
2016-09-05 18:44 ` Felix Fietkau
2016-09-06 11:43 ` Toke Høiland-Jørgensen
2016-09-06 11:45 ` Toke Høiland-Jørgensen
2016-09-06 11:44 ` [PATCH v8] " Toke Høiland-Jørgensen
2016-09-06 22:04 ` Felix Fietkau
2016-09-12 12:35 ` Johannes Berg
2016-09-12 13:08 ` Toke Høiland-Jørgensen
2016-09-12 13:19 ` Johannes Berg
2016-09-22 17:04 ` [PATCH v9 0/2] mac80211: TXQ dequeue path rework Toke Høiland-Jørgensen
2016-09-22 17:04 ` [PATCH v9 1/2] mac80211: Move ieee802111_tx_dequeue() to later in tx.c Toke Høiland-Jørgensen
2016-09-30 11:13 ` Johannes Berg
2016-09-22 17:04 ` [PATCH v9 2/2] mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue Toke Høiland-Jørgensen
2016-09-30 10:27 ` Johannes Berg
2016-09-30 12:39 ` Toke Høiland-Jørgensen
2016-09-30 12:43 ` Johannes Berg
2016-09-30 12:45 ` Toke Høiland-Jørgensen
2016-09-30 12:49 ` Johannes Berg
2016-09-30 14:01 ` Toke Høiland-Jørgensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mvjq649b.fsf@toke.dk \
--to=toke@toke.dk \
--cc=jandryuk@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=make-wifi-fast@lists.bufferbloat.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.