All of lore.kernel.org
 help / color / mirror / Atom feed
From: Felipe Balbi <felipe.balbi@linux.intel.com>
To: Lu Baolu <baolu.lu@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lu Baolu <baolu.lu@linux.intel.com>,
	stable@vger.kernel.org, Alan Stern <stern@rowland.harvard.edu>
Subject: Re: [PATCH 1/1] usb: misc: usbtest: add fix for driver hang
Date: Tue, 09 Aug 2016 12:17:42 +0300	[thread overview]
Message-ID: <87mvkmb8sp.fsf@linux.intel.com> (raw)
In-Reply-To: <1470718894-29325-1-git-send-email-baolu.lu@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 5060 bytes --]


Hi,

Lu Baolu <baolu.lu@linux.intel.com> writes:
> In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling
> into usb_sg_cancel(). usb_sg_cancel() will do nothing and return
> directly if req->status has been set to a non-zero value. This will
> cause driver hang as soon as transfer time out is triggered.
>
> In my test case, below system log shows when port reset happens after
> urb being submitted.
>
> [55099.746213] usb 2-3: USB disconnect, device number 2
> [55321.955451] INFO: task kworker/6:0:59 blocked for more than 120 seconds.
> [55321.955463]       Not tainted 4.7.0-rc6+ #19
> [55321.955466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [55321.955472] kworker/6:0     D ffff88045ad3bbf8     0    59      2 0x00000000
> [55321.955489] Workqueue: usb_hub_wq hub_event
> [55321.955493]  ffff88045ad3bbf8 ffff880400000030 ffff88045ad30f40 ffff88045ad3bbd0
> [55321.955499]  ffff88045ad3c000 ffff8804590920fc ffff88045ad30f40 00000000ffffffff
> [55321.955505]  ffff880459092100 ffff88045ad3bc10 ffffffff817b5925 ffff8804590920f8
> [55321.955511] Call Trace:
> [55321.955521]  [<ffffffff817b5925>] schedule+0x35/0x80
> [55321.955527]  [<ffffffff817b5c1e>] schedule_preempt_disabled+0xe/0x10
> [55321.955533]  [<ffffffff817b7505>] __mutex_lock_slowpath+0x95/0x110
> [55321.955538]  [<ffffffff817b759f>] mutex_lock+0x1f/0x2f
> [55321.955544]  [<ffffffff815b28a3>] usb_disconnect+0x53/0x270
> [55321.955550]  [<ffffffff815b4521>] hub_port_connect+0x71/0x900
> [55321.955556]  [<ffffffff815b08be>] ? hub_port_reset+0x3de/0x630
> [55321.955562]  [<ffffffff815b53ee>] hub_event+0x63e/0xb20
> [55321.955569]  [<ffffffff810ae675>] ? put_prev_entity+0x35/0x730
> [55321.955577]  [<ffffffff810921f3>] process_one_work+0x153/0x3f0
> [55321.955583]  [<ffffffff810929ab>] worker_thread+0x12b/0x4b0
> [55321.955590]  [<ffffffff81092880>] ? rescuer_thread+0x340/0x340
> [55321.955595]  [<ffffffff810981c9>] kthread+0xc9/0xe0
> [55321.955601]  [<ffffffff817b961f>] ret_from_fork+0x1f/0x40
> [55321.955606]  [<ffffffff81098100>] ? kthread_park+0x60/0x60
> [55321.955638] INFO: task testusb:3011 blocked for more than 120 seconds.
> [55321.955643]       Not tainted 4.7.0-rc6+ #19
> [55321.955647] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [55321.955651] testusb         D ffff880449a079f8     0  3011   2367 0x00000000
> [55321.955657]  ffff880449a079f8 0000000000000002 ffff88045754cc40 ffffffff815b91b9
> [55321.955663]  ffff880449a08000 7fffffffffffffff ffff880449a07cb0 ffff88045754cc40
> [55321.955668]  0000000000000000 ffff880449a07a10 ffffffff817b5925 ffff880449a07cb8
> [55321.955673] Call Trace:
> [55321.955680]  [<ffffffff815b91b9>] ? usb_hcd_submit_urb+0xa9/0xba0
> [55321.955685]  [<ffffffff817b5925>] schedule+0x35/0x80
> [55321.955691]  [<ffffffff817b8661>] schedule_timeout+0x231/0x2d0
> [55321.955698]  [<ffffffff8117a592>] ? __alloc_pages_nodemask+0x112/0x2b0
> [55321.955703]  [<ffffffff817b62e4>] wait_for_completion+0xa4/0x110
> [55321.955709]  [<ffffffff810a2cb0>] ? wake_up_q+0x80/0x80
> [55321.955713]  [<ffffffff815bcf78>] usb_sg_wait+0x138/0x190
> [55321.955722]  [<ffffffffc01b6fdf>] perform_sglist+0xef/0x180 [usbtest]
> [55321.955728]  [<ffffffffc01b6020>] ? usbtest_resume+0x10/0x10 [usbtest]
> [55321.955734]  [<ffffffffc01b9648>] usbtest_do_ioctl+0x898/0x1520 [usbtest]
> [55321.955740]  [<ffffffff815ba2a5>] ? usb_hcd_reset_endpoint+0x25/0x60
> [55321.955745]  [<ffffffff815bd4f5>] ? usb_enable_endpoint+0x85/0x90
> [55321.955751]  [<ffffffffc01ba3f3>] usbtest_ioctl+0x123/0x26e [usbtest]
> [55321.955756]  [<ffffffff81172335>] ? filemap_map_pages+0x295/0x310
> [55321.955763]  [<ffffffff815c5cc8>] ? proc_ioctl+0x48/0x210
> [55321.955769]  [<ffffffff815c5db0>] proc_ioctl+0x130/0x210
> [55321.955776]  [<ffffffff815c7d4a>] usbdev_do_ioctl+0x50a/0x1170
> [55321.955782]  [<ffffffff815c89de>] usbdev_ioctl+0xe/0x20
> [55321.955789]  [<ffffffff81207786>] do_vfs_ioctl+0x96/0x590
> [55321.955794]  [<ffffffff81203723>] ? putname+0x53/0x60
> [55321.955800]  [<ffffffff81207cf9>] SyS_ioctl+0x79/0x90
> [55321.955806]  [<ffffffff817b93f6>] entry_SYSCALL_64_fastpath+0x1e/0xa
>
> This patch fixes this driver hang. It should be back-ported to stable
> kernel with version after v3.15.
>
> Cc: stable@vger.kernel.org
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> ---
>  drivers/usb/misc/usbtest.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
> index 6b978f0..6c6586d 100644
> --- a/drivers/usb/misc/usbtest.c
> +++ b/drivers/usb/misc/usbtest.c
> @@ -585,7 +585,6 @@ static void sg_timeout(unsigned long _req)
>  {
>  	struct usb_sg_request	*req = (struct usb_sg_request *) _req;
>  
> -	req->status = -ETIMEDOUT;
>  	usb_sg_cancel(req);
>  }

IMO, req->status = -ETIMEDOUT should still be done, but perhaps after
usb_sg_cancel(). Alan?

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]

  reply	other threads:[~2016-08-09  9:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-09  5:01 [PATCH 1/1] usb: misc: usbtest: add fix for driver hang Lu Baolu
2016-08-09  9:17 ` Felipe Balbi [this message]
2016-08-09 14:18   ` Alan Stern
2016-08-10  5:11     ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87mvkmb8sp.fsf@linux.intel.com \
    --to=felipe.balbi@linux.intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.