From: Kevin Hilman <khilman@deeprootsystems.com>
To: felipe.balbi@nokia.com
Cc: "linux-kernel\@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"wim\@iguana.be" <wim@iguana.be>
Subject: Re: [PATCH] watchdog: davinci: convert to ioremap() + io[read|write]
Date: Thu, 05 Feb 2009 10:27:35 -0800 [thread overview]
Message-ID: <87myd04u3s.fsf@deeprootsystems.com> (raw)
In-Reply-To: <20090205173810.GE10567@scadufax.research.nokia.com> (Felipe Balbi's message of "Thu\, 5 Feb 2009 19\:38\:10 +0200")
Felipe Balbi <felipe.balbi@nokia.com> writes:
> On Thu, Feb 05, 2009 at 06:26:22PM +0100, Kevin Hilman wrote:
>> + wdt_base = ioremap(res->start, res->end);
>
> second argument should be size right ??
>
> ioremap(res->start, res->end - res->start + 1);
>
> in fact you have a size variable in this driver used for
> request_mem_region() just be sure the value is still valid and use it
> ;-)
>
>> + if (!wdt_base) {
>> + printk(KERN_ERR MODULE_NAME "failed to map memory region\n");
>
> you have a dev pointer in platform_device would be cool
> to use dev_err() here
OK, below is updated version.
Kevin
--------------------------------------------------------------------------
commit ac1e6e73c1d7e08a64eb6d2053280be48438223d
Author: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu Jan 29 14:14:30 2009 -0800
watchdog: davinci: convert to ioremap() + io[read|write]
Remove davinci platform-specific IO accessor macros in favor
of standard ioremap + io[read|write]* functions.
Also, convert printk(KERN_ERR ....) into dev_err(...)
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 2e13602..c51d0b0 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -24,7 +24,7 @@
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+#include <linux/device.h>
#define MODULE_NAME "DAVINCI-WDT: "
@@ -75,9 +75,9 @@ static void wdt_service(void)
spin_lock(&io_lock);
/* put watchdog in service state */
- davinci_writel(WDKEY_SEQ0, wdt_base + WDTCR);
+ iowrite32(WDKEY_SEQ0, wdt_base + WDTCR);
/* put watchdog in active state */
- davinci_writel(WDKEY_SEQ1, wdt_base + WDTCR);
+ iowrite32(WDKEY_SEQ1, wdt_base + WDTCR);
spin_unlock(&io_lock);
}
@@ -90,29 +90,29 @@ static void wdt_enable(void)
spin_lock(&io_lock);
/* disable, internal clock source */
- davinci_writel(0, wdt_base + TCR);
+ iowrite32(0, wdt_base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
- davinci_writel(0, wdt_base + TGCR);
+ iowrite32(0, wdt_base + TGCR);
tgcr = TIMMODE_64BIT_WDOG | TIM12RS_UNRESET | TIM34RS_UNRESET;
- davinci_writel(tgcr, wdt_base + TGCR);
+ iowrite32(tgcr, wdt_base + TGCR);
/* clear counter regs */
- davinci_writel(0, wdt_base + TIM12);
- davinci_writel(0, wdt_base + TIM34);
+ iowrite32(0, wdt_base + TIM12);
+ iowrite32(0, wdt_base + TIM34);
/* set timeout period */
timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) & 0xffffffff);
- davinci_writel(timer_margin, wdt_base + PRD12);
+ iowrite32(timer_margin, wdt_base + PRD12);
timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) >> 32);
- davinci_writel(timer_margin, wdt_base + PRD34);
+ iowrite32(timer_margin, wdt_base + PRD34);
/* enable run continuously */
- davinci_writel(ENAMODE12_PERIODIC, wdt_base + TCR);
+ iowrite32(ENAMODE12_PERIODIC, wdt_base + TCR);
/* Once the WDT is in pre-active state write to
* TIM12, TIM34, PRD12, PRD34, TCR, TGCR, WDTCR are
* write protected (except for the WDKEY field)
*/
/* put watchdog in pre-active state */
- davinci_writel(WDKEY_SEQ0 | WDEN, wdt_base + WDTCR);
+ iowrite32(WDKEY_SEQ0 | WDEN, wdt_base + WDTCR);
/* put watchdog in active state */
- davinci_writel(WDKEY_SEQ1 | WDEN, wdt_base + WDTCR);
+ iowrite32(WDKEY_SEQ1 | WDEN, wdt_base + WDTCR);
spin_unlock(&io_lock);
}
@@ -197,17 +197,16 @@ static int davinci_wdt_probe(struct platform_device *pdev)
{
int ret = 0, size;
struct resource *res;
+ struct device *dev = &pdev->dev;
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
- printk(KERN_INFO MODULE_NAME
- "DaVinci Watchdog Timer: heartbeat %d sec\n", heartbeat);
+ dev_info(dev, "heartbeat %d sec\n", heartbeat);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
- printk(KERN_INFO MODULE_NAME
- "failed to get memory region resource\n");
+ dev_err(dev, "failed to get memory region resource\n");
return -ENOENT;
}
@@ -215,20 +214,26 @@ static int davinci_wdt_probe(struct platform_device *pdev)
wdt_mem = request_mem_region(res->start, size, pdev->name);
if (wdt_mem == NULL) {
- printk(KERN_INFO MODULE_NAME "failed to get memory region\n");
+ dev_err(dev, "failed to get memory region\n");
return -ENOENT;
}
- wdt_base = (void __iomem *)(res->start);
+
+ wdt_base = ioremap(res->start, size);
+ if (!wdt_base) {
+ dev_err(dev, "failed to map memory region\n");
+ return -ENOMEM;
+ }
ret = misc_register(&davinci_wdt_miscdev);
if (ret < 0) {
- printk(KERN_ERR MODULE_NAME "cannot register misc device\n");
+ dev_err(dev, "cannot register misc device\n");
release_resource(wdt_mem);
kfree(wdt_mem);
} else {
set_bit(WDT_DEVICE_INITED, &wdt_status);
}
+ iounmap(wdt_base);
return ret;
}
prev parent reply other threads:[~2009-02-05 18:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-05 17:26 [PATCH] watchdog: davinci: convert to ioremap() + io[read|write] Kevin Hilman
2009-02-05 17:38 ` Felipe Balbi
2009-02-05 18:13 ` Kevin Hilman
2009-02-05 18:27 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87myd04u3s.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=felipe.balbi@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.