Re: [PATCH] arm64: dts: marvell: cn9131-cf-solidwan: fix cp1 comphy links

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Josua Mayer <josua@solid-run.com> writes:

> Marvell CN913x platforms use common phy framework for configuring and
> linking serdes lanes according to their usage.
> Each CP (X) features 5 serdes lanes (Y) represented by cpX_comphyY
> nodes.
>
> CN9131 SolidWAN uses CP1 serdes lanes 3 and 5 for eth1 and eth2 of CP1
> respectively. Devicetree however wrongly links from these ports to the
> comphy of CP0.
>
> Replace the wrong links to cp0_comphy with cp1_comphy inside cp1_eth1,
> cp1_eth2.
>
> Fixes: 1280840d2030 ("arm64: dts: add description for solidrun cn9131 solidwan board")
> Signed-off-by: Josua Mayer <josua@solid-run.com>


Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
> index b1ea7dcaed17dc0205d1ae91d4178dd1f8313a5b..47234d0858dd2195bb1485f25768ad3c757b7ac2 100644
> --- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
> +++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
> @@ -435,7 +435,7 @@ &cp1_eth1 {
>  	managed = "in-band-status";
>  	phy-mode = "sgmii";
>  	phy = <&cp1_phy0>;
> -	phys = <&cp0_comphy3 1>;
> +	phys = <&cp1_comphy3 1>;
>  	status = "okay";
>  };
>  
> @@ -444,7 +444,7 @@ &cp1_eth2 {
>  	managed = "in-band-status";
>  	phy-mode = "sgmii";
>  	phy = <&cp1_phy1>;
> -	phys = <&cp0_comphy5 2>;
> +	phys = <&cp1_comphy5 2>;
>  	status = "okay";
>  };
>  
>
> ---
> base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
> change-id: 20241119-cn9131-solidwan-comphy-fixup-aa1870913d0a
>
> Best regards,
> -- 
> Josua Mayer <josua@solid-run.com>
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com