From: Jani Nikula <jani.nikula@linux.intel.com>
To: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v3] drm/i915: Bump up CDCLK to eliminate underruns on TGL
Date: Mon, 13 Jan 2020 13:59:58 +0200 [thread overview]
Message-ID: <87o8v7murl.fsf@intel.com> (raw)
In-Reply-To: <20200109220547.23817-1-stanislav.lisovskiy@intel.com>
On Fri, 10 Jan 2020, Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> wrote:
> There seems to be some undocumented bandwidth
> bottleneck/dependency which scales with CDCLK,
> causing FIFO underruns when CDCLK is too low,
> even when it's correct from BSpec point of view.
>
> Currently for TGL platforms we calculate
> min_cdclk initially based on pixel_rate divided
> by 2, accounting for also plane requirements,
> however in some cases the lowest possible CDCLK
> doesn't work and causing the underruns.
> We've found experimentally that raising cdclk to
> at least pixel_rate (rather than pixel_rate/2)
> eliminates these underruns, so let's use this as a
> temporary workaround until the hardware team
> can suggest a more precise remedy.
>
> Explicitly stating here that this seems to be currently
> rather a Hack, than final solution.
>
> v2: Use clamp operation instead of min(Matt Roper)
>
> v3: - Fixed commit message(Matt Roper)
> - Now using pixel_rate instead of max_cdclk(Jani Nikula)
> - Switched to max from clamp(Ville Syrjälä)
> Hopefully this hybrid satisfies everyone :)
>
> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> Closes: https://gitlab.freedesktop.org/drm/intel/issues/402
Pushed to dinq, thanks for the patch and review.
And now to figure out the permanent fix!
BR,
Jani.
> ---
> drivers/gpu/drm/i915/display/intel_cdclk.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index 7d1ab1e5b7c3..0ce5926006ca 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -2004,6 +2004,18 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
> /* Account for additional needs from the planes */
> min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
>
> + /*
> + * HACK. Currently for TGL platforms we calculate
> + * min_cdclk initially based on pixel_rate divided
> + * by 2, accounting for also plane requirements,
> + * however in some cases the lowest possible CDCLK
> + * doesn't work and causing the underruns.
> + * Explicitly stating here that this seems to be currently
> + * rather a Hack, than final solution.
> + */
> + if (IS_TIGERLAKE(dev_priv))
> + min_cdclk = max(min_cdclk, (int)crtc_state->pixel_rate);
> +
> if (min_cdclk > dev_priv->max_cdclk_freq) {
> DRM_DEBUG_KMS("required cdclk (%d kHz) exceeds max (%d kHz)\n",
> min_cdclk, dev_priv->max_cdclk_freq);
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-01-13 12:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 22:05 [Intel-gfx] [PATCH v3] drm/i915: Bump up CDCLK to eliminate underruns on TGL Stanislav Lisovskiy
2020-01-09 22:33 ` Matt Roper
2020-01-10 0:53 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915: Bump up CDCLK to eliminate underruns on TGL (rev3) Patchwork
2020-01-10 21:42 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-01-12 18:27 ` Lisovskiy, Stanislav
2020-01-10 23:17 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915: Bump up CDCLK to eliminate underruns on TGL (rev4) Patchwork
2020-01-13 8:00 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for drm/i915: Bump up CDCLK to eliminate underruns on TGL (rev3) Patchwork
2020-01-13 8:32 ` Lisovskiy, Stanislav
2020-01-13 8:54 ` Peres, Martin
2020-01-13 9:02 ` Saarinen, Jani
2020-01-13 9:02 ` Lisovskiy, Stanislav
2020-01-13 9:20 ` [Intel-gfx] ✓ Fi.CI.IGT: success " Patchwork
2020-01-13 11:59 ` Jani Nikula [this message]
2020-01-14 17:26 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for drm/i915: Bump up CDCLK to eliminate underruns on TGL (rev4) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o8v7murl.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=stanislav.lisovskiy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.