From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] Add support for VCore III SoCs found in Microsemi switches
Date: Tue, 25 Sep 2018 17:22:49 +0200 [thread overview]
Message-ID: <87o9cleh4m.fsf@bootlin.com> (raw)
In-Reply-To: <20180925130108.19211-1-gregory.clement@bootlin.com> (Gregory CLEMENT's message of "Tue, 25 Sep 2018 15:01:02 +0200")
Hi,
On mar., sept. 25 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:
> Hello,
>
> This series add the support of 2 SoCs: Ocelot and Luton from
> Microsemi. Both of them belongs to the same family Vcore III.
>
> We found them on various advanced switches product.
>
> The support for Ocelot already have been submit to Linux, but not yet
> the Luton support.
>
> Besides this series 3 others patches are needed but they are driver
> related:
> DW SPI: Allow to overload the management of the external CS
> gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spi
> pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based)
>
> They will be submitted separately.
>
> Thanks,
>
> Gregory
>
>
> Gregory CLEMENT (6):
> MIPS: move create_tlb() in an proper header: mipsregs.h
> MSCC: add support for VCoreIII SoCs
This patch didn't reach the mailing because it was too large. Actually,
many defined were not used, so I removed then, and I am going to send
the missing patch now.
Gregory
> MSCC: add board support for the VCoreIII based evaluation boards
> MSCC: add device tree for Ocelot and Luton (boards and SoCs)
> MSCC: add configuration for Ocelot and Luton based boards
> MIPS: bootm: Add support for Vcore III linux kernel
>
> arch/mips/Kconfig | 6 +
> arch/mips/Makefile | 1 +
> arch/mips/cpu/cpu.c | 10 -
> arch/mips/dts/luton_pcb091.dts | 36 +
> arch/mips/dts/mscc,luton.dtsi | 87 ++
> arch/mips/dts/mscc,ocelot.dtsi | 132 +++
> arch/mips/dts/mscc,ocelot_pcb.dtsi | 37 +
> arch/mips/dts/ocelot_pcb120.dts | 12 +
> arch/mips/dts/ocelot_pcb123.dts | 12 +
> arch/mips/include/asm/mipsregs.h | 11 +
> arch/mips/lib/bootm.c | 62 +-
> arch/mips/mach-mscc/Kconfig | 101 ++
> arch/mips/mach-mscc/Makefile | 6 +
> arch/mips/mach-mscc/cpu.c | 72 ++
> arch/mips/mach-mscc/dram.c | 62 ++
> arch/mips/mach-mscc/include/ioremap.h | 49 +
> arch/mips/mach-mscc/include/mach/cache.h | 36 +
> arch/mips/mach-mscc/include/mach/common.h | 31 +
> arch/mips/mach-mscc/include/mach/ddr.h | 753 +++++++++++++++
> .../mips/mach-mscc/include/mach/luton/luton.h | 37 +
> .../include/mach/luton/luton_devcpu_gcb.h | 16 +
> .../include/mach/luton/luton_icpu_cfg-ref.h | 884 ++++++++++++++++++
> .../include/mach/luton/luton_icpu_cfg.h | 247 +++++
> .../mach-mscc/include/mach/ocelot/ocelot.h | 35 +
> .../include/mach/ocelot/ocelot_devcpu_gcb.h | 353 +++++++
> .../include/mach/ocelot/ocelot_icpu_cfg.h | 884 ++++++++++++++++++
> arch/mips/mach-mscc/include/mach/tlb.h | 65 ++
> arch/mips/mach-mscc/lowlevel_init.S | 29 +
> arch/mips/mach-mscc/lowlevel_init_luton.S | 63 ++
> arch/mips/mach-mscc/reset.c | 37 +
> board/mscc/common/board.c | 29 +
> board/mscc/luton/Kconfig | 14 +
> board/mscc/luton/Makefile | 4 +
> board/mscc/luton/luton.c | 14 +
> board/mscc/ocelot/Kconfig | 24 +
> board/mscc/ocelot/Makefile | 5 +
> board/mscc/ocelot/ocelot.c | 38 +
> configs/mscc_luton_defconfig | 66 ++
> configs/mscc_ocelot_defconfig | 57 ++
> configs/mscc_ocelot_pcb120_defconfig | 56 ++
> include/configs/vcoreiii.h | 72 ++
> 41 files changed, 4515 insertions(+), 30 deletions(-)
> create mode 100644 arch/mips/dts/luton_pcb091.dts
> create mode 100644 arch/mips/dts/mscc,luton.dtsi
> create mode 100644 arch/mips/dts/mscc,ocelot.dtsi
> create mode 100644 arch/mips/dts/mscc,ocelot_pcb.dtsi
> create mode 100644 arch/mips/dts/ocelot_pcb120.dts
> create mode 100644 arch/mips/dts/ocelot_pcb123.dts
> create mode 100644 arch/mips/mach-mscc/Kconfig
> create mode 100644 arch/mips/mach-mscc/Makefile
> create mode 100644 arch/mips/mach-mscc/cpu.c
> create mode 100644 arch/mips/mach-mscc/dram.c
> create mode 100644 arch/mips/mach-mscc/include/ioremap.h
> create mode 100644 arch/mips/mach-mscc/include/mach/cache.h
> create mode 100644 arch/mips/mach-mscc/include/mach/common.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ddr.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_devcpu_gcb.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_icpu_cfg-ref.h
> create mode 100644 arch/mips/mach-mscc/include/mach/luton/luton_icpu_cfg.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
> create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h
> create mode 100644 arch/mips/mach-mscc/include/mach/tlb.h
> create mode 100644 arch/mips/mach-mscc/lowlevel_init.S
> create mode 100644 arch/mips/mach-mscc/lowlevel_init_luton.S
> create mode 100644 arch/mips/mach-mscc/reset.c
> create mode 100644 board/mscc/common/board.c
> create mode 100644 board/mscc/luton/Kconfig
> create mode 100644 board/mscc/luton/Makefile
> create mode 100644 board/mscc/luton/luton.c
> create mode 100644 board/mscc/ocelot/Kconfig
> create mode 100644 board/mscc/ocelot/Makefile
> create mode 100644 board/mscc/ocelot/ocelot.c
> create mode 100644 configs/mscc_luton_defconfig
> create mode 100644 configs/mscc_ocelot_defconfig
> create mode 100644 configs/mscc_ocelot_pcb120_defconfig
> create mode 100644 include/configs/vcoreiii.h
>
> --
> 2.19.0
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
next prev parent reply other threads:[~2018-09-25 15:22 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-25 13:01 [U-Boot] [PATCH 0/6] Add support for VCore III SoCs found in Microsemi switches Gregory CLEMENT
2018-09-25 13:01 ` [U-Boot] [PATCH 1/6] MIPS: move create_tlb() in an proper header: mipsregs.h Gregory CLEMENT
2018-09-25 13:01 ` [U-Boot] [PATCH 3/6] MSCC: add board support for the VCoreIII based evaluation boards Gregory CLEMENT
2018-09-26 19:28 ` Daniel Schwierzeck
2018-10-09 11:22 ` Gregory CLEMENT
2018-09-26 23:03 ` Marek Vasut
2018-10-09 11:23 ` Gregory CLEMENT
2018-09-25 13:01 ` [U-Boot] [PATCH 4/6] MSCC: add device tree for Ocelot and Luton (boards and SoCs) Gregory CLEMENT
2018-09-26 19:31 ` Daniel Schwierzeck
2018-10-09 11:23 ` Gregory CLEMENT
2018-09-25 13:01 ` [U-Boot] [PATCH 5/6] MSCC: add configuration for Ocelot and Luton based boards Gregory CLEMENT
2018-09-26 19:31 ` Daniel Schwierzeck
2018-10-09 11:24 ` Gregory CLEMENT
2018-09-25 13:01 ` [U-Boot] [PATCH 6/6] MIPS: bootm: Add support for Vcore III linux kernel Gregory CLEMENT
2018-09-26 19:40 ` Daniel Schwierzeck
2018-10-09 11:28 ` Gregory CLEMENT
2018-09-25 15:22 ` Gregory CLEMENT [this message]
2018-09-25 15:25 ` [U-Boot] [PATCH 2/6] MSCC: add support for VCoreIII SoCs Gregory CLEMENT
[not found] ` <20180925130108.19211-3-gregory.clement@bootlin.com>
2018-09-26 19:25 ` Daniel Schwierzeck
2018-09-27 10:14 ` Gregory CLEMENT
2018-09-27 11:57 ` Alexandre Belloni
2018-10-09 11:20 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o9cleh4m.fsf@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.