From: Jani Nikula <jani.nikula@linux.intel.com>
To: Damien Lespiau <damien.lespiau@gmail.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/6] drm/i915/hdmi: Read the HPD status before trying to read the EDID
Date: Fri, 14 Dec 2012 11:34:51 +0200 [thread overview]
Message-ID: <87obhx2czo.fsf@intel.com> (raw)
In-Reply-To: <1355414944-1494-2-git-send-email-damien.lespiau@gmail.com>
On Thu, 13 Dec 2012, Damien Lespiau <damien.lespiau@gmail.com> wrote:
> From: Damien Lespiau <damien.lespiau@intel.com>
>
> If you unplug the hdmi connector slowly enough, the hotplug interrupt
> fires but then the kernel code tries to read the EDID and succeeds
> (because the connector is still half connected, the HPD pin is shorter
> than the others, and DDC works). Since EDID succeeds it thinks the
> monitor is still connected.
>
> To prevent that, read the live HPD status in the hotplug handler before
> trying to read the EDID.
>
> v2: Rename the function to ibx_ (Chris Wilson)
The name's a bit funny in the intermediate step because the patch
doesn't really do anything for IBX before patch 5/6... :) I don't mind,
just an observation, and perhaps Daniel will fold the two together once
we get tested-by on ILK+IBX.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55372
> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 3 +++
> drivers/gpu/drm/i915/intel_hdmi.c | 9 +++++++--
> 3 files changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 115bf62..21fedf7 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -994,6 +994,39 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
> }
> }
>
> +/*
> + * ibx_digital_port_connected - is the specified port connected?
> + * @dev_priv: i915 private structure
> + * @port: the port to test
> + *
> + * Returns true if @port is connected, false otherwise.
> + */
> +bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
> + struct intel_digital_port *port)
> +{
> + u32 bit;
> +
> + /* XXX: IBX has different SDEISR bits */
> + if (HAS_PCH_IBX(dev_priv->dev))
> + return true;
> +
> + switch(port->port) {
> + case PORT_B:
> + bit = SDE_PORTB_HOTPLUG_CPT;
> + break;
> + case PORT_C:
> + bit = SDE_PORTC_HOTPLUG_CPT;
> + break;
> + case PORT_D:
> + bit = SDE_PORTD_HOTPLUG_CPT;
> + break;
> + default:
> + return true;
> + }
> +
> + return I915_READ(SDEISR) & bit;
> +}
> +
> static const char *state_string(bool enabled)
> {
> return enabled ? "on" : "off";
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 22728f2..53d4c8f 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -545,6 +545,9 @@ hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
> return container_of(intel_hdmi, struct intel_digital_port, hdmi);
> }
>
> +bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
> + struct intel_digital_port *port);
> +
> extern void intel_connector_attach_encoder(struct intel_connector *connector,
> struct intel_encoder *encoder);
> extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 53df0a8..9f834d3 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -793,16 +793,21 @@ static bool g4x_hdmi_connected(struct intel_hdmi *intel_hdmi)
> static enum drm_connector_status
> intel_hdmi_detect(struct drm_connector *connector, bool force)
> {
> + struct drm_device *dev = connector->dev;
> struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> struct intel_digital_port *intel_dig_port =
> hdmi_to_dig_port(intel_hdmi);
> struct intel_encoder *intel_encoder = &intel_dig_port->base;
> - struct drm_i915_private *dev_priv = connector->dev->dev_private;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> struct edid *edid;
> enum drm_connector_status status = connector_status_disconnected;
>
> - if (IS_G4X(connector->dev) && !g4x_hdmi_connected(intel_hdmi))
> +
> + if (IS_G4X(dev) && !g4x_hdmi_connected(intel_hdmi))
> return status;
> + else if (HAS_PCH_SPLIT(dev) &&
> + !ibx_digital_port_connected(dev_priv, intel_dig_port))
> + return status;
>
> intel_hdmi->has_hdmi_sink = false;
> intel_hdmi->has_audio = false;
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2012-12-14 9:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-13 16:08 [PATCH 1/6] drm/i915: Cleanup SHOTPLUG_CTL status bits definitions Damien Lespiau
2012-12-13 16:09 ` [PATCH 2/6] drm/i915/hdmi: Read the HPD status before trying to read the EDID Damien Lespiau
2012-12-14 9:34 ` Jani Nikula [this message]
2012-12-13 16:09 ` [PATCH 3/6] drm/i915/dp: Read the HPD status before trying to read the DPCD Damien Lespiau
2012-12-14 10:17 ` Daniel Vetter
2012-12-13 16:09 ` [PATCH 4/6] drm/i915/dp: Log the DPCD only if we have successfully retrieved one Damien Lespiau
2012-12-14 9:40 ` Jani Nikula
2012-12-13 16:09 ` [PATCH 5/6] drm/i915: Implement ibx_digital_port_connected() for IBX Damien Lespiau
2012-12-14 9:43 ` Jani Nikula
2012-12-13 16:09 ` [PATCH 6/6] drm/i915: Remove stale comment about intel_dp_detect() Damien Lespiau
2012-12-14 9:46 ` Jani Nikula
2012-12-14 10:20 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87obhx2czo.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=damien.lespiau@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.