From: ebiederm@xmission.com (Eric W. Biederman)
To: Simon Horman <horms@verge.net.au>
Cc: kexec@lists.infradead.org
Subject: Re: [PATCH] build: Avoid duplicate files in tarball
Date: Mon, 13 Aug 2012 20:36:44 -0700 [thread overview]
Message-ID: <87obmejgab.fsf@xmission.com> (raw)
In-Reply-To: <1343876888-21106-1-git-send-email-horms@verge.net.au> (Simon Horman's message of "Thu, 2 Aug 2012 12:08:08 +0900")
Simon Horman <horms@verge.net.au> writes:
This seems reasonable to me. Although I wonder if it might be easier
to just switch to doing something terribly simple like calling
git-archive.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>
> ---
> kexec/Makefile | 75 +++++++++++++++++++++++++++-------------------
> kexec/arch/arm/Makefile | 2 +-
> kexec/arch/ppc/Makefile | 3 +-
> kexec/arch/sh/Makefile | 3 +-
> kexec/arch/x86_64/Makefile | 12 +++++---
> purgatory/Makefile | 2 --
> 6 files changed, 58 insertions(+), 39 deletions(-)
>
> diff --git a/kexec/Makefile b/kexec/Makefile
> index 8c815b5..dff8da6 100644
> --- a/kexec/Makefile
> +++ b/kexec/Makefile
> @@ -7,47 +7,62 @@ $(PURGATORY_HEX_C): $(PURGATORY) $(BIN_TO_HEX)
> $(MKDIR) -p $(@D)
> $(BIN_TO_HEX) purgatory < $(PURGATORY) > $@
>
> -KEXEC_SRCS =
> +KEXEC_SRCS = $(KEXEC_SRCS_base)
> KEXEC_GENERATED_SRCS =
>
> -KEXEC_SRCS += kexec/kexec.c
> -KEXEC_SRCS += kexec/ifdown.c
> -KEXEC_SRCS += kexec/kexec-elf.c
> -KEXEC_SRCS += kexec/kexec-elf-exec.c
> -KEXEC_SRCS += kexec/kexec-elf-core.c
> -KEXEC_SRCS += kexec/kexec-elf-rel.c
> -KEXEC_SRCS += kexec/kexec-elf-boot.c
> -KEXEC_SRCS += kexec/kexec-iomem.c
> -KEXEC_SRCS += kexec/firmware_memmap.c
> -KEXEC_SRCS += kexec/crashdump.c
> -KEXEC_SRCS += kexec/crashdump-xen.c
> -KEXEC_SRCS += kexec/phys_arch.c
> -KEXEC_SRCS += kexec/kernel_version.c
> -KEXEC_SRCS += kexec/lzma.c
> -KEXEC_SRCS += kexec/zlib.c
> +KEXEC_SRCS_base += kexec/kexec.c
> +KEXEC_SRCS_base += kexec/ifdown.c
> +KEXEC_SRCS_base += kexec/kexec-elf.c
> +KEXEC_SRCS_base += kexec/kexec-elf-exec.c
> +KEXEC_SRCS_base += kexec/kexec-elf-core.c
> +KEXEC_SRCS_base += kexec/kexec-elf-rel.c
> +KEXEC_SRCS_base += kexec/kexec-elf-boot.c
> +KEXEC_SRCS_base += kexec/kexec-iomem.c
> +KEXEC_SRCS_base += kexec/firmware_memmap.c
> +KEXEC_SRCS_base += kexec/crashdump.c
> +KEXEC_SRCS_base += kexec/crashdump-xen.c
> +KEXEC_SRCS_base += kexec/phys_arch.c
> +KEXEC_SRCS_base += kexec/kernel_version.c
> +KEXEC_SRCS_base += kexec/lzma.c
> +KEXEC_SRCS_base += kexec/zlib.c
>
> KEXEC_GENERATED_SRCS += $(PURGATORY_HEX_C)
>
> -dist += kexec/Makefile $(KEXEC_SRCS) $(KEXEC_GENERATED_SRCS) \
> - kexec/crashdump-elf.c \
> +dist += kexec/Makefile $(KEXEC_GENERATED_SRCS) \
> + $(KEXEC_SRCS_base) kexec/crashdump-elf.c \
> kexec/crashdump.h kexec/firmware_memmap.h \
> kexec/kexec-elf-boot.h \
> kexec/kexec-elf.h kexec/kexec-sha256.h \
> kexec/kexec-zlib.h kexec/kexec-lzma.h \
> kexec/kexec-syscall.h kexec/kexec.h kexec/kexec.8
>
> -$(ARCH)_PROC_IOMEM = kexec/proc_iomem.c
> -KEXEC_SRCS += $($(ARCH)_PROC_IOMEM)
> -$(ARCH)_VIRT_TO_PHYS = kexec/virt_to_phys.c
> -KEXEC_SRCS += $($(ARCH)_VIRT_TO_PHYS)
> -$(ARCH)_PHYS_TO_VIRT = kexec/phys_to_virt.c
> -KEXEC_SRCS += $($(ARCH)_PHYS_TO_VIRT)
> -$(ARCH)_ADD_SEGMENT = kexec/add_segment.c
> -KEXEC_SRCS += $($(ARCH)_ADD_SEGMENT)
> -$(ARCH)_ADD_BUFFER = kexec/add_buffer.c
> -KEXEC_SRCS += $($(ARCH)_ADD_BUFFER)
> -$(ARCH)_ARCH_REUSE_INITRD = kexec/arch_reuse_initrd.c
> -KEXEC_SRCS += $($(ARCH)_ARCH_REUSE_INITRD)
> +dist += kexec/proc_iomem.c
> +$(ARCH)_PROC_IOMEM = kexec/proc_iomem.c
> +KEXEC_SRCS += $($(ARCH)_PROC_IOMEM)
> +
> +dist += kexec/virt_to_phys.c
> +$(ARCH)_VIRT_TO_PHYS = kexec/virt_to_phys.c
> +KEXEC_SRCS += $($(ARCH)_VIRT_TO_PHYS)
> +
> +dist += kexec/phys_to_virt.c
> +$(ARCH)_PHYS_TO_VIRT = kexec/phys_to_virt.c
> +KEXEC_SRCS += $($(ARCH)_PHYS_TO_VIRT)
> +
> +dist += kexec/add_segment.c
> +$(ARCH)_ADD_SEGMENT = kexec/add_segment.c
> +KEXEC_SRCS += $($(ARCH)_ADD_SEGMENT)
> +
> +dist += kexec/add_buffer.c
> +$(ARCH)_ADD_BUFFER = kexec/add_buffer.c
> +KEXEC_SRCS += $($(ARCH)_ADD_BUFFER)
> +
> +dist += kexec/arch_reuse_initrd.c
> +$(ARCH)_ARCH_REUSE_INITRD = kexec/arch_reuse_initrd.c
> +KEXEC_SRCS += $($(ARCH)_ARCH_REUSE_INITRD)
> +
> +dist += kexec/kexec-uImage.c
> +$(ARCH)_UIMAGE =
> +KEXEC_SRCS += $($(ARCH)_UIMAGE)
>
> include $(srcdir)/kexec/arch/alpha/Makefile
> include $(srcdir)/kexec/arch/arm/Makefile
> diff --git a/kexec/arch/arm/Makefile b/kexec/arch/arm/Makefile
> index 3d07e59..288ec33 100644
> --- a/kexec/arch/arm/Makefile
> +++ b/kexec/arch/arm/Makefile
> @@ -6,8 +6,8 @@ arm_KEXEC_SRCS+= kexec/arch/arm/kexec-zImage-arm.c
> arm_KEXEC_SRCS+= kexec/arch/arm/kexec-uImage-arm.c
> arm_KEXEC_SRCS+= kexec/arch/arm/kexec-arm.c
> arm_KEXEC_SRCS+= kexec/arch/arm/crashdump-arm.c
> -arm_KEXEC_SRCS+= kexec/kexec-uImage.c
>
> +arm_UIMAGE = kexec/kexec-uImage.c
> arm_PHYS_TO_VIRT = kexec/arch/arm/phys_to_virt.c
>
> dist += kexec/arch/arm/Makefile $(arm_KEXEC_SRCS) $(arm_PHYS_TO_VIRT) \
> diff --git a/kexec/arch/ppc/Makefile b/kexec/arch/ppc/Makefile
> index 41242a5..e868917 100644
> --- a/kexec/arch/ppc/Makefile
> +++ b/kexec/arch/ppc/Makefile
> @@ -13,7 +13,8 @@ ppc_KEXEC_SRCS += kexec/arch/ppc/ppc-setup-dol.S
> ppc_KEXEC_SRCS += kexec/arch/ppc/fixup_dtb.c
> ppc_KEXEC_SRCS += kexec/arch/ppc/fs2dt.c
> ppc_KEXEC_SRCS += kexec/arch/ppc/crashdump-powerpc.c
> -ppc_KEXEC_SRCS += kexec/kexec-uImage.c
> +
> +ppc_UIMAGE = kexec/kexec-uImage.c
>
> libfdt_SRCS = kexec/arch/ppc/libfdt-wrapper.c
> libfdt_SRCS += $(LIBFDT_SRCS:%=kexec/arch/ppc/libfdt/%)
> diff --git a/kexec/arch/sh/Makefile b/kexec/arch/sh/Makefile
> index a9f6081..7cf40ae 100644
> --- a/kexec/arch/sh/Makefile
> +++ b/kexec/arch/sh/Makefile
> @@ -9,7 +9,8 @@ sh_KEXEC_SRCS += kexec/arch/sh/kexec-elf-sh.c
> sh_KEXEC_SRCS += kexec/arch/sh/kexec-elf-rel-sh.c
> sh_KEXEC_SRCS += kexec/arch/sh/netbsd_booter.S
> sh_KEXEC_SRCS += kexec/arch/sh/crashdump-sh.c
> -sh_KEXEC_SRCS += kexec/kexec-uImage.c
> +
> +sh_UIMAGE = kexec/kexec-uImage.c
>
> sh_ADD_BUFFER =
> sh_ADD_SEGMENT =
> diff --git a/kexec/arch/x86_64/Makefile b/kexec/arch/x86_64/Makefile
> index 916babf..405bdf5 100644
> --- a/kexec/arch/x86_64/Makefile
> +++ b/kexec/arch/x86_64/Makefile
> @@ -9,10 +9,14 @@ x86_64_KEXEC_SRCS += kexec/arch/i386/kexec-nbi.c
> x86_64_KEXEC_SRCS += kexec/arch/i386/x86-linux-setup.c
> x86_64_KEXEC_SRCS += kexec/arch/i386/kexec-x86-common.c
> x86_64_KEXEC_SRCS += kexec/arch/i386/crashdump-x86.c
> -x86_64_KEXEC_SRCS += kexec/arch/x86_64/kexec-x86_64.c
> -x86_64_KEXEC_SRCS += kexec/arch/x86_64/kexec-elf-x86_64.c
> -x86_64_KEXEC_SRCS += kexec/arch/x86_64/kexec-elf-rel-x86_64.c
>
> -dist += kexec/arch/x86_64/Makefile $(x86_64_KEXEC_SRCS) \
> +x86_64_KEXEC_SRCS_native = kexec/arch/x86_64/kexec-x86_64.c
> +x86_64_KEXEC_SRCS_native += kexec/arch/x86_64/kexec-elf-x86_64.c
> +x86_64_KEXEC_SRCS_native += kexec/arch/x86_64/kexec-elf-rel-x86_64.c
> +
> +x86_64_KEXEC_SRCS += $(x86_64_KEXEC_SRCS_native)
> +
> +# Don't add sources in i386/ to dist, as i386/Makefile adds them
> +dist += kexec/arch/x86_64/Makefile $(x86_64_KEXEC_SRCS_native) \
> kexec/arch/x86_64/kexec-x86_64.h \
> kexec/arch/x86_64/include/arch/options.h
> diff --git a/purgatory/Makefile b/purgatory/Makefile
> index ee1679c..711799b 100644
> --- a/purgatory/Makefile
> +++ b/purgatory/Makefile
> @@ -27,8 +27,6 @@ include $(srcdir)/purgatory/arch/s390/Makefile
> include $(srcdir)/purgatory/arch/sh/Makefile
> include $(srcdir)/purgatory/arch/x86_64/Makefile
>
> -PURGATORY_SRCS+=$($(ARCH)_PURGATORY_SRCS)
> -
> PURGATORY_OBJS = $(call objify, $(PURGATORY_SRCS)) purgatory/sha256.o
> PURGATORY_DEPS = $(call depify, $(PURGATORY_OBJS))
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
next prev parent reply other threads:[~2012-08-14 3:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-02 3:08 [PATCH] build: Avoid duplicate files in tarball Simon Horman
2012-08-14 3:36 ` Eric W. Biederman [this message]
2012-08-14 8:27 ` Mahesh Jagannath Salgaonkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87obmejgab.fsf@xmission.com \
--to=ebiederm@xmission.com \
--cc=horms@verge.net.au \
--cc=kexec@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.