From: arnaud.patard@rtp-net.org (Arnaud Patard (Rtp))
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI
Date: Sat, 05 Mar 2011 21:46:52 +0100 [thread overview]
Message-ID: <87oc5puwg3.fsf@lebrac.rtp-net.org> (raw)
In-Reply-To: <56132A77AB93C141BF06E6B96CA6CFEA19124C@039-SN1MPN1-004.039d.mgd.msft.net> (Nguyen Dinh-R's message of "Fri, 4 Mar 2011 23:33:11 +0000")
Nguyen Dinh-R00091 <R00091@freescale.com> writes:
> Hi Arnaud,
Hi,
>
> I just sent out a 2nd set of the MX51 LPM patch. I have tested successfully on my mx51 babbage without any code modifications.
>
> If you would kindly verify on your side, that would great.
>
> You need both patches:
>
> [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI
> [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51
No success. I even tried disabling nearly all drivers and nothing. The
last line I have in the serial console is :
PM: late suspend of devices complete after 0.354 msecs
So, I still don't know if the system is crashing while suspending or if
the system is suspended but doesn't wake up.
Arnaud
WARNING: multiple messages have this Message-ID (diff)
From: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
To: Nguyen Dinh-R00091 <R00091@freescale.com>
Cc: "linux-kernel\@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel\@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux\@arm.linux.org.uk" <linux@arm.linux.org.uk>,
"s.hauer\@pengutronix.de" <s.hauer@pengutronix.de>,
"u.kleine-koenig\@pengutronix.de"
<u.kleine-koenig@pengutronix.de>,
Zhang Lily-R58066 <R58066@freescale.com>,
Vaidyanathan Ranjani-RA5478 <RA5478@freescale.com>
Subject: Re: [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI
Date: Sat, 05 Mar 2011 21:46:52 +0100 [thread overview]
Message-ID: <87oc5puwg3.fsf@lebrac.rtp-net.org> (raw)
In-Reply-To: <56132A77AB93C141BF06E6B96CA6CFEA19124C@039-SN1MPN1-004.039d.mgd.msft.net> (Nguyen Dinh-R's message of "Fri, 4 Mar 2011 23:33:11 +0000")
Nguyen Dinh-R00091 <R00091@freescale.com> writes:
> Hi Arnaud,
Hi,
>
> I just sent out a 2nd set of the MX51 LPM patch. I have tested successfully on my mx51 babbage without any code modifications.
>
> If you would kindly verify on your side, that would great.
>
> You need both patches:
>
> [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI
> [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51
No success. I even tried disabling nearly all drivers and nothing. The
last line I have in the serial console is :
PM: late suspend of devices complete after 0.354 msecs
So, I still don't know if the system is crashing while suspending or if
the system is suspended but doesn't wake up.
Arnaud
next prev parent reply other threads:[~2011-03-05 20:46 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-04 23:29 [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Dinh.Nguyen at freescale.com
2011-03-04 23:29 ` Dinh.Nguyen
2011-03-04 23:29 ` [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51 Dinh.Nguyen at freescale.com
2011-03-04 23:29 ` Dinh.Nguyen
2011-03-11 9:16 ` Arnaud Patard (Rtp)
2011-03-11 9:16 ` Arnaud Patard
2011-03-04 23:33 ` [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
2011-03-04 23:33 ` Nguyen Dinh-R00091
2011-03-05 20:46 ` Arnaud Patard (Rtp) [this message]
2011-03-05 20:46 ` Arnaud Patard
2011-03-07 15:37 ` Nguyen Dinh-R00091
2011-03-07 15:37 ` Nguyen Dinh-R00091
2011-03-07 16:02 ` Arnaud Patard (Rtp)
2011-03-07 16:02 ` Arnaud Patard
2011-03-07 16:35 ` Nguyen Dinh-R00091
2011-03-07 16:35 ` Nguyen Dinh-R00091
2011-03-07 18:07 ` s.hauer at pengutronix.de
2011-03-07 18:07 ` s.hauer
2011-03-07 20:01 ` Nguyen Dinh-R00091
2011-03-07 20:01 ` Nguyen Dinh-R00091
2011-03-08 11:40 ` David Jander
2011-03-08 11:40 ` David Jander
2011-03-10 13:37 ` s.hauer at pengutronix.de
2011-03-10 13:37 ` s.hauer
2011-03-10 16:06 ` David Jander
2011-03-10 16:06 ` David Jander
2011-03-07 20:29 ` Nguyen Dinh-R00091
2011-03-07 20:29 ` Nguyen Dinh-R00091
2011-03-10 15:12 ` Nguyen Dinh-R00091
2011-03-10 15:12 ` Nguyen Dinh-R00091
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87oc5puwg3.fsf@lebrac.rtp-net.org \
--to=arnaud.patard@rtp-net.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.