From: Takashi Iwai <tiwai@suse.de>
To: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: Sven Jans <skbotnl@disroot.org>,
David Rhodes <david.rhodes@cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org, patches@opensource.cirrus.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] ALSA: hda: cs35l41: Support HP OmniBook 7 Laptop 16-bh0xxx
Date: Wed, 15 Jul 2026 16:34:43 +0200 [thread overview]
Message-ID: <87pl0owccc.wl-tiwai@suse.de> (raw)
In-Reply-To: <20260709214414.8461-1-skbotnl@disroot.org>
On Thu, 09 Jul 2026 23:43:53 +0200,
Sven Jans wrote:
>
> The laptop has a malformed _DSD which causes the cirrus,dev-index
> property to fail to parse, so it needs to be supported using the
> configuration table.
>
> Signed-off-by: Sven Jans <skbotnl@disroot.org>
> ---
> Resubmission, discussion of the previous submission stalled.
> The values are equal to the values reported in the _DSD.
> You can find my ACPI dump to verify here:
> https://bugzilla.kernel.org/attachment.cgi?id=310050
> Link to v1:
> https://lore.kernel.org/linux-sound/20260506181807.22547-1-skbotnl@disroot.org/
Stefan, is this also one of models with odd firmware?
thanks,
Takashi
>
> sound/hda/codecs/side-codecs/cs35l41_hda_property.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/sound/hda/codecs/side-codecs/cs35l41_hda_property.c b/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
> index 416d7bf3e289..e14a87336478 100644
> --- a/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
> +++ b/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
> @@ -85,6 +85,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
> { "103C8C51", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
> { "103C8CDD", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
> { "103C8CDE", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 3900, 24 },
> + { "103C8E60", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
> { "104312AF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
> { "10431433", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
> { "10431463", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
> @@ -511,6 +512,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
> { "CSC3551", "103C8C6A", hp_i2c_int_2amp_dual_spkid },
> { "CSC3551", "103C8CDD", generic_dsd_config },
> { "CSC3551", "103C8CDE", generic_dsd_config },
> + { "CSC3551", "103C8E60", generic_dsd_config },
> { "CSC3551", "104312AF", generic_dsd_config },
> { "CSC3551", "10431433", generic_dsd_config },
> { "CSC3551", "10431463", generic_dsd_config },
> --
> 2.55.0
>
next prev parent reply other threads:[~2026-07-15 14:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-09 21:43 [PATCH v2] ALSA: hda: cs35l41: Support HP OmniBook 7 Laptop 16-bh0xxx Sven Jans
2026-07-15 14:34 ` Takashi Iwai [this message]
2026-07-15 14:54 ` Sven Jans
2026-07-15 16:13 ` Stefan Binding (Opensource)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87pl0owccc.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=david.rhodes@cirrus.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sbinding@opensource.cirrus.com \
--cc=skbotnl@disroot.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.