From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot,v3] ARM: Add Support for the VInCo platform
Date: Fri, 19 Feb 2016 09:06:39 +0100 [thread overview]
Message-ID: <87povtp1io.fsf@free-electrons.com> (raw)
In-Reply-To: <1455830855-43683-19-git-send-email-andreas.devel@googlemail.com> ("Andreas Bießmann"'s message of "Thu, 18 Feb 2016 22:27:35 +0100")
Hi Andreas,
On jeu., f?vr. 18 2016, Andreas Bie?mann <andreas.devel@googlemail.com> wrote:
> Dear Gregory CLEMENT,
>
> Gregory CLEMENT <gregory.clement@free-electrons.com> writes:
>>The Versatile Industrial Communication platform is a community oriented
>>board from Landis + Gyr. It comes with:
>>- an RS-485 port
>>- 2 Ethernet ports
>>- a wireless M-BUS
>>- a 4G modem
>>- a 4MB SPI flash
>>- a 4GB eMMC
>>
>>Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
>>Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>[rebase on current TOT]
>>Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
>>---
>> arch/arm/mach-at91/Kconfig | 6 ++
>> board/l+g/vinco/Kconfig | 12 +++
>> board/l+g/vinco/Makefile | 1 +
>> board/l+g/vinco/vinco.c | 212 +++++++++++++++++++++++++++++++++++++++++++++
>> configs/vinco_defconfig | 13 +++
>> include/configs/vinco.h | 168 +++++++++++++++++++++++++++++++++++
>> 6 files changed, 412 insertions(+)
>> create mode 100644 board/l+g/vinco/Kconfig
>> create mode 100644 board/l+g/vinco/Makefile
>> create mode 100644 board/l+g/vinco/vinco.c
>> create mode 100644 configs/vinco_defconfig
>> create mode 100644 include/configs/vinco.h
>
> applied to u-boot-atmel/master, thanks!
>
> I had to rebase and remove an empty newline at EOF
> in vinco.h.
Thanks!
Gregory
>
> Best regards,
> Andreas Bie?mann
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2016-02-19 8:06 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 2:16 [U-Boot] [PATCH v4 0/5] ARM: at91: improve peripheral and system clock handle functions Wenyou Yang
2016-02-03 2:16 ` [U-Boot] [PATCH v4 1/5] ARM: at91: asm/at91_pmc.h: fix trival register offset Wenyou Yang
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, " Andreas Bießmann
2015-12-16 16:01 ` [U-Boot] [PATCH v3] ARM: Add Support for the VInCo platform Gregory CLEMENT
2016-01-21 11:08 ` Gregory CLEMENT
2016-01-21 11:32 ` Andreas Bießmann
2016-01-21 14:11 ` Gregory CLEMENT
2016-01-24 22:23 ` Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 2/5] ARM: at91: clock: add a new file to handle clock Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 3/5] ARM: cpu: at91: clean up peripheral clock code Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 4/5] board: atmel: " Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 5/5] drivers: at91: " Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 1/4] ARM: at91: clock: add UTMI PLL enable/disable function Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 2/4] ARM: at91: armv7: clean up UTMI PLL handle code Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 3/4] drivers: usb: atmel: clean up the UTMI PLL code Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 4/4] board: atmel: siemens: clean up " Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 1/3] ARM: at91: clock: add PLLB enable/disable functions Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 2/3] drivers: usb: ohci-at91: clean up the PLLB code Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v4, 3/3] board: atmel: siemens: clean up " Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 1/3] ARM: at91: clock: add PMC_PLLICPR init function Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 2/3] ARM: at91: clean up the PMC_PLLICPR init code Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v3, 3/3] board: atmel: " Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] siemens,at91: enable features for smartweb Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] arm: at91: Add support for DENX MA5D4 SoM and EVK Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot, v2] ARM: at91: sama5d2: configure the L2 cache memory Andreas Bießmann
2016-02-18 21:27 ` [U-Boot] [U-Boot,v3] ARM: Add Support for the VInCo platform Andreas Bießmann
2016-02-19 8:06 ` Gregory CLEMENT [this message]
2016-02-19 8:48 ` Andreas Bießmann
2016-02-03 2:16 ` [U-Boot] [PATCH v4 2/5] ARM: at91: clock: add a new file to handle clock Wenyou Yang
2016-02-18 20:29 ` [U-Boot] [U-Boot, v4, " Andreas Bießmann
2016-02-03 2:16 ` [U-Boot] [PATCH v4 3/5] ARM: cpu: at91: clean up peripheral clock code Wenyou Yang
2016-02-03 2:16 ` [U-Boot] [PATCH v4 4/5] board: atmel: " Wenyou Yang
2016-02-03 2:16 ` [U-Boot] [PATCH v4 5/5] drivers: at91: " Wenyou Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87povtp1io.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.