From: Christian Groessler <cpg@aladdin.de>
To: Mike Jagdis <jaggy@purplet.demon.co.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help.
Date: 21 Dec 2001 12:44:37 +0100 [thread overview]
Message-ID: <87pu58ol0a.fsf@panther.aladdin.de> (raw)
On 12/21/2001 10:58:30 AM GMT Mike Jagdis wrote:
>
>Mike Eldridge wrote:
>
>> i was going to comment about simply using lowercase equivalents, but
>> then milli already has 'm', although the concept of a millibyte (or even
>> millibit) is absurd.
>
>Why? For instance a millibyte/s might be a hearbeat across a LAN every
>hour or so or it might be a control traffic requirement for a deep space
>probe. You might not have an immediate use for the term but it has a
>specific meaning - and certainly isn't "absurd" (see definition on
>http://www.dict.org).
So, is it 1/1024 or 1/1000 bytes ? :-)
regards,
chris
next reply other threads:[~2001-12-21 11:46 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-21 11:44 Christian Groessler [this message]
2001-12-21 12:50 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Rene Engelhard
2001-12-21 14:40 ` Reid Hekman
2001-12-21 14:48 ` Rene Engelhard
2001-12-26 19:04 ` Riley Williams
2001-12-21 15:48 ` Mike Jagdis
2001-12-21 16:07 ` Rene Engelhard
2001-12-21 17:43 ` Bob Glamm
2001-12-21 20:50 ` Andreas Ferber
[not found] <Pine.LNX.4.33.0203181358540.25105-100000@router.windsormac hine.com>
2002-03-19 14:20 ` Pete Cervasio
-- strict thread matches above, loose matches on Subject: below --
2002-03-18 11:31 Nayyer Tiger
2002-03-18 16:12 ` Randy.Dunlap
2002-03-18 16:36 ` Richard B. Johnson
2002-03-18 13:53 ` Andreas Dilger
2002-03-18 17:38 ` Jakob Kemi
2002-03-18 18:24 ` H. Peter Anvin
2002-03-18 18:35 ` Rik van Riel
2002-03-18 19:00 ` Mike Dresser
2002-03-18 19:08 ` Rik van Riel
2002-03-18 19:31 ` Chris Friesen
2002-03-18 22:04 ` Mike Dresser
2002-03-18 22:12 ` Mike Dresser
2002-03-19 11:48 ` Remco Post
2002-03-18 17:04 ` Steven Cole
2002-01-08 21:24 Changing KB, MB, and GB to KiB, MiB, and GiB =?iso-8859-1?q?in Configure=2Ehelp=2E?= Dr. Kelsey Hudson
2002-01-08 21:29 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help H. Peter Anvin
2002-01-08 22:15 ` Dr. Kelsey Hudson
2002-01-08 23:03 ` Timothy Covell
2001-12-23 9:18 Per Jessen
2001-12-23 16:34 ` Stephen Satchell
2001-12-22 23:22 Per Jessen
2001-12-23 7:21 ` Nicholas Knight
2001-12-23 13:35 ` Alan Cox
2001-12-22 8:39 matthew david reuther
2002-01-08 21:18 ` Dr. Kelsey Hudson
2001-12-22 2:51 Thomas Hood
2001-12-21 22:55 Stuart Lynne
2001-12-21 19:55 Per Jessen
[not found] ` <by>
2001-12-22 1:48 ` Timothy Covell
2001-12-22 4:32 ` H. Peter Anvin
2001-12-22 4:49 ` Timothy Covell
2001-12-22 7:57 ` Alan Cox
2001-12-22 18:22 ` Timothy Covell
2001-12-22 19:54 ` Derek Fawcus
2001-12-22 2:11 ` Timothy Covell
2001-12-22 4:44 ` H. Peter Anvin
2001-12-22 4:55 ` M. Edward (Ed) Borasky
2001-12-22 5:29 ` Ryan Cumming
2001-12-22 5:53 ` Timothy Covell
2001-12-22 22:41 ` Changing KB, MB, and GB to KiB, MiB, and GiB in?Configure.help Vojtech Pavlik
2001-12-22 10:53 ` Pekka Pietikäinen
2001-12-20 19:25 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help RaúlNúñez de Arenas Coronado
2001-12-20 21:41 ` Jamie Lokier
2001-12-21 23:05 ` Rob Landley
2001-12-20 19:13 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.hel p Nicholas Knight
2001-12-20 19:41 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Mike Harrold
2001-12-21 16:59 ` Alan Cox
2001-12-21 17:50 ` Mike Harrold
2001-12-21 18:41 ` Kent Borg
2001-12-21 18:49 ` lk
2001-12-21 19:12 ` Kent Borg
2001-12-22 4:51 ` Albert D. Cahalan
2001-12-20 18:02 Steven Cole
2001-12-20 18:16 ` Matt Bernstein
2001-12-20 18:42 ` Randolph Bentson
2001-12-20 19:00 ` Dave Jones
2001-12-20 19:07 ` Nicholas Knight
2001-12-20 18:47 ` Michael Dunsky
2001-12-20 19:00 ` Timothy Covell
2001-12-21 1:44 ` Stephen Satchell
2001-12-20 18:26 ` Robert Love
2001-12-20 18:52 ` Eric S. Raymond
2001-12-20 19:32 ` Steven Cole
2001-12-20 19:37 ` Eric S. Raymond
2001-12-20 20:40 ` Marc Schiffbauer
2001-12-20 20:32 ` Gábor Lénárt
2001-12-20 21:05 ` Richard B. Johnson
2001-12-20 21:14 ` Gábor Lénárt
2001-12-20 21:25 ` Andreas Dilger
2001-12-20 22:49 ` Mike Eldridge
2001-12-21 10:58 ` Mike Jagdis
2001-12-26 18:59 ` Riley Williams
2002-01-02 17:17 ` Jonathan Amery
2002-01-02 20:17 ` Timothy Covell
2002-01-03 4:23 ` Daniel Phillips
2002-01-03 15:46 ` Timothy Covell
2001-12-24 13:39 ` Lionel Bouton
2001-12-25 11:25 ` Pavel Machek
2001-12-25 20:14 ` Lionel Bouton
2001-12-20 19:49 ` Bernd Eckenfels
2001-12-22 10:24 ` Pozsar Balazs
2001-12-22 10:47 ` Phil Howard
2001-12-24 13:21 ` Ian Molton
2001-12-22 11:30 ` Bernd Eckenfels
2001-12-22 20:18 ` Pozsar Balazs
2001-12-23 5:39 ` Bernd Eckenfels
2001-12-22 16:03 ` Stephen Satchell
2001-12-23 10:43 ` David Woodhouse
2001-12-23 12:00 ` Vojtech Pavlik
2001-12-23 16:24 ` Stephen Satchell
2001-12-24 12:37 ` David Woodhouse
2001-12-28 10:25 ` Kai Henningsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87pu58ol0a.fsf@panther.aladdin.de \
--to=cpg@aladdin.de \
--cc=jaggy@purplet.demon.co.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.