From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: Nishanth Menon <nm@ti.com>, Neha Francis <n-francis@ti.com>,
Tom Rini <trini@konsulko.com>
Cc: Bryan <bb@ti.com>, Praneeth <praneeth@ti.com>,
Andrew <afd@ti.com>, Robert Nelson <robertcnelson@gmail.com>,
Vignesh <vigneshr@ti.com>,
u-boot@lists.denx.de, Jan Kiszka <jan.kiszka@siemens.com>,
Marcel Ziswiler <marcel@ziswiler.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>,
Emanuele Ghidoli <emanuele.ghidoli@toradex.com>,
Nishanth Menon <nm@ti.com>
Subject: Re: [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1
Date: Tue, 12 Sep 2023 14:11:08 +0200 [thread overview]
Message-ID: <87r0n3lhgj.fsf@baylibre.com> (raw)
In-Reply-To: <20230911140256.945074-3-nm@ti.com>
On lun., sept. 11, 2023 at 09:02, Nishanth Menon <nm@ti.com> wrote:
> Sync device tree with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> arch/arm/dts/k3-am62-main.dtsi | 52 ++++++++-
> arch/arm/dts/k3-am62-mcu.dtsi | 24 +++++
> arch/arm/dts/k3-am62-verdin-dev.dtsi | 50 +++++++++
> arch/arm/dts/k3-am62-verdin.dtsi | 45 +++++++-
> arch/arm/dts/k3-am62.dtsi | 8 ++
> arch/arm/dts/k3-am625-beagleplay.dts | 154 ++++++++++++++++++++++++++-
> arch/arm/dts/k3-am625-sk.dts | 2 +-
> 7 files changed, 325 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
> index 2488e3a537fe..284b90c94da8 100644
> --- a/arch/arm/dts/k3-am62-main.dtsi
> +++ b/arch/arm/dts/k3-am62-main.dtsi
> @@ -55,11 +55,29 @@
> #phy-cells = <1>;
> };
>
> - epwm_tbclk: clock@4130 {
> - compatible = "ti,am62-epwm-tbclk", "syscon";
> + epwm_tbclk: clock-controller@4130 {
> + compatible = "ti,am62-epwm-tbclk";
> reg = <0x4130 0x4>;
> #clock-cells = <1>;
> };
> +
> + audio_refclk0: clock-controller@82e0 {
> + compatible = "ti,am62-audio-refclk";
> + reg = <0x82e0 0x4>;
> + clocks = <&k3_clks 157 0>;
> + assigned-clocks = <&k3_clks 157 0>;
> + assigned-clock-parents = <&k3_clks 157 8>;
> + #clock-cells = <0>;
> + };
> +
> + audio_refclk1: clock-controller@82e4 {
> + compatible = "ti,am62-audio-refclk";
> + reg = <0x82e4 0x4>;
> + clocks = <&k3_clks 157 10>;
> + assigned-clocks = <&k3_clks 157 10>;
> + assigned-clock-parents = <&k3_clks 157 18>;
> + #clock-cells = <0>;
> + };
> };
>
> dmss: bus@48000000 {
> @@ -174,7 +192,6 @@
> crypto: crypto@40900000 {
> compatible = "ti,am62-sa3ul";
> reg = <0x00 0x40900000 0x00 0x1200>;
> - power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
> @@ -590,7 +607,7 @@
>
> usb0: usb@31000000 {
> compatible = "snps,dwc3";
> - reg =<0x00 0x31000000 0x00 0x50000>;
> + reg = <0x00 0x31000000 0x00 0x50000>;
> interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
> interrupt-names = "host", "peripheral";
> @@ -613,7 +630,7 @@
>
> usb1: usb@31100000 {
> compatible = "snps,dwc3";
> - reg =<0x00 0x31100000 0x00 0x50000>;
> + reg = <0x00 0x31100000 0x00 0x50000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
> interrupt-names = "host", "peripheral";
> @@ -718,6 +735,31 @@
> };
> };
>
> + dss: dss@30200000 {
> + compatible = "ti,am625-dss";
> + reg = <0x00 0x30200000 0x00 0x1000>, /* common */
> + <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
> + <0x00 0x30206000 0x00 0x1000>, /* vid */
> + <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
> + <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
> + <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
> + <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
> + reg-names = "common", "vidl1", "vid",
> + "ovr1", "ovr2", "vp1", "vp2";
> + power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 186 6>,
> + <&dss_vp1_clk>,
> + <&k3_clks 186 2>;
> + clock-names = "fck", "vp1", "vp2";
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> +
> + dss_ports: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> hwspinlock: spinlock@2a000000 {
> compatible = "ti,am64-hwspinlock";
> reg = <0x00 0x2a000000 0x00 0x1000>;
> diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
> index 19fc38157d94..80a3e1db26a9 100644
> --- a/arch/arm/dts/k3-am62-mcu.dtsi
> +++ b/arch/arm/dts/k3-am62-mcu.dtsi
> @@ -147,4 +147,28 @@
> /* Tightly coupled to M4F */
> status = "reserved";
> };
> +
> + mcu_mcan0: can@4e08000 {
> + compatible = "bosch,m_can";
> + reg = <0x00 0x4e08000 0x00 0x200>,
> + <0x00 0x4e00000 0x00 0x8000>;
> + reg-names = "m_can", "message_ram";
> + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
> + clock-names = "hclk", "cclk";
> + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> +
> + mcu_mcan1: can@4e18000 {
> + compatible = "bosch,m_can";
> + reg = <0x00 0x4e18000 0x00 0x200>,
> + <0x00 0x4e10000 0x00 0x8000>;
> + reg-names = "m_can", "message_ram";
> + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
> + clock-names = "hclk", "cclk";
> + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> };
> diff --git a/arch/arm/dts/k3-am62-verdin-dev.dtsi b/arch/arm/dts/k3-am62-verdin-dev.dtsi
> index 846caee7dfa4..6701cb8974bb 100644
> --- a/arch/arm/dts/k3-am62-verdin-dev.dtsi
> +++ b/arch/arm/dts/k3-am62-verdin-dev.dtsi
> @@ -8,6 +8,42 @@
> * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
> */
>
> +/ {
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,bitclock-master = <&codec_dai>;
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&codec_dai>;
> + simple-audio-card,name = "verdin-nau8822";
> + simple-audio-card,routing =
> + "Headphones", "LHP",
> + "Headphones", "RHP",
> + "Speaker", "LSPK",
> + "Speaker", "RSPK",
> + "Line Out", "AUXOUT1",
> + "Line Out", "AUXOUT2",
> + "LAUX", "Line In",
> + "RAUX", "Line In",
> + "LMICP", "Mic In",
> + "RMICP", "Mic In";
> + simple-audio-card,widgets =
> + "Headphones", "Headphones",
> + "Line Out", "Line Out",
> + "Speaker", "Speaker",
> + "Microphone", "Mic In",
> + "Line", "Line In";
> +
> + codec_dai: simple-audio-card,codec {
> + clocks = <&audio_refclk1>;
> + sound-dai = <&nau8822_1a>;
> + };
> +
> + simple-audio-card,cpu {
> + sound-dai = <&mcasp0>;
> + };
> + };
> +};
> +
> /* Verdin ETHs */
> &cpsw3g {
> pinctrl-names = "default";
> @@ -65,6 +101,15 @@
> &main_i2c1 {
> status = "okay";
>
> + /* Audio Codec */
> + nau8822_1a: audio-codec@1a {
> + compatible = "nuvoton,nau8822";
> + reg = <0x1a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2s1_mclk>;
> + #sound-dai-cells = <0>;
> + };
> +
> /* IO Expander */
> gpio_expander_21: gpio@21 {
> compatible = "nxp,pcal6416";
> @@ -144,6 +189,11 @@
> status = "okay";
> };
>
> +/* Verdin CAN_2 */
> +&mcu_mcan0 {
> + status = "okay";
> +};
> +
> /* Verdin UART_4 */
> &mcu_uart0 {
> status = "okay";
> diff --git a/arch/arm/dts/k3-am62-verdin.dtsi b/arch/arm/dts/k3-am62-verdin.dtsi
> index 57dd061911ab..40992e7e4c30 100644
> --- a/arch/arm/dts/k3-am62-verdin.dtsi
> +++ b/arch/arm/dts/k3-am62-verdin.dtsi
> @@ -19,6 +19,8 @@
> };
>
> aliases {
> + can0 = &main_mcan0;
> + can1 = &mcu_mcan0;
> ethernet0 = &cpsw_port1;
> ethernet1 = &cpsw_port2;
> i2c0 = &main_i2c0;
> @@ -732,6 +734,14 @@
> >;
> };
>
> + /* Verdin CAN_2 */
> + pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
> + pinctrl-single,pins = <
> + AM62X_MCU_IOPAD(0x0038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ /* SODIMM 26 */
> + AM62X_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ /* SODIMM 24 */
> + >;
> + };
> +
> /* Verdin UART_4 - Reserved to Cortex-M4 */
> pinctrl_mcu_uart0: mcu-uart0-default-pins {
> pinctrl-single,pins = <
> @@ -758,6 +768,11 @@
> };
> };
>
> +/* VERDIN I2S_1_MCLK */
> +&audio_refclk1 {
> + assigned-clock-rates = <25000000>;
> +};
> +
> &cpsw3g {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_rgmii1>;
> @@ -800,6 +815,26 @@
> };
> };
>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_parallel_rgb>;
> + status = "disabled";
> +};
> +
> +&dss_ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* VP2: DPI Output */
> + port@1 {
> + reg = <1>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&rgb_in>;
> + };
> + };
> +};
> +
> /* Verdin PWM_1, PWM_2 */
> &epwm0 {
> pinctrl-names = "default";
> @@ -1036,6 +1071,7 @@
>
> rgb_in: endpoint {
> data-lines = <18>;
> + remote-endpoint = <&dpi_out>;
> };
> };
>
> @@ -1238,8 +1274,6 @@
> status = "disabled";
> };
>
> -/* Verdin CAN_2 - Reserved to Cortex-M4 */
> -
> /* Verdin SPI_1 */
> &main_spi1 {
> pinctrl-names = "default";
> @@ -1333,6 +1367,13 @@
> "";
> };
>
> +/* Verdin CAN_2 */
> +&mcu_mcan0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mcu_mcan0>;
> + status = "disabled";
> +};
> +
> /* Verdin UART_4 - Cortex-M4 UART */
> &mcu_uart0 {
> pinctrl-names = "default";
> diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
> index 5e72c445f37a..11f14eef2d44 100644
> --- a/arch/arm/dts/k3-am62.dtsi
> +++ b/arch/arm/dts/k3-am62.dtsi
> @@ -102,6 +102,14 @@
> };
> };
>
> + dss_vp1_clk: clock-divider-oldi {
> + compatible = "fixed-factor-clock";
> + clocks = <&k3_clks 186 0>;
> + #clock-cells = <0>;
> + clock-div = <7>;
> + clock-mult = <1>;
> + };
> +
> #include "k3-am62-thermal.dtsi"
> };
>
> diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
> index 589bf998bc52..7cfdf562b53b 100644
> --- a/arch/arm/dts/k3-am625-beagleplay.dts
> +++ b/arch/arm/dts/k3-am625-beagleplay.dts
> @@ -14,7 +14,7 @@
> #include "k3-am625.dtsi"
>
> / {
> - compatible = "beagle,am625-beagleplay", "ti,am625";
> + compatible = "beagle,am625-beagleplay", "ti,am625";
> model = "BeagleBoard.org BeaglePlay";
>
> aliases {
> @@ -192,6 +192,34 @@
>
> };
>
> + hdmi0: connector-hdmi {
> + compatible = "hdmi-connector";
> + label = "hdmi";
> + type = "a";
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&it66121_out>;
> + };
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "it66121 HDMI";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
> + simple-audio-card,frame-master = <&hdmi_dailink_master>;
> +
> + hdmi_dailink_master: simple-audio-card,cpu {
> + sound-dai = <&mcasp1>;
> + system-clock-direction-out;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&it66121>;
> + };
> + };
> +
> /* Workaround for errata i2329 - just use mdio bitbang */
> mdio0: mdio {
> compatible = "virtual,mdio-gpio";
> @@ -422,6 +450,57 @@
> AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
> >;
> };
> +
> + hdmi_gpio_pins_default: hdmi-gpio-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
> + AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
> + >;
> + };
> +
> + mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
> + AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
> + AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
> + AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
> + AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
> + AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
> + >;
> + };
> +
> + dss0_pins_default: dss0-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> + AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> + AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> + AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> + AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> + AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> + AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> + AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> + AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> + AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> + AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> + AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> + AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> + AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> + AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> + AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> + AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> + AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> + AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> + AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> + AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
> + AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
> + AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
> + AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
> + AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
> + AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
> + AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
> + AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
> + >;
> + };
> };
>
> &mcu_pmx0 {
> @@ -432,7 +511,7 @@
> >;
> };
>
> - gbe_pmx_obsclk: gbe-pmx-clk-default {
> + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
> pinctrl-single,pins = <
> AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
> >;
> @@ -670,6 +749,42 @@
> pinctrl-0 = <&i2c2_1v8_pins_default>;
> clock-frequency = <100000>;
> status = "okay";
> +
> + it66121: bridge-hdmi@4c {
> + compatible = "ite,it66121";
> + reg = <0x4c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_gpio_pins_default>;
> + vcn33-supply = <&vdd_3v3>;
> + vcn18-supply = <&buck2_reg>;
> + vrf12-supply = <&buck3_reg>;
> + reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
> + interrupt-parent = <&main_gpio0>;
> + interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
> + #sound-dai-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + it66121_in: endpoint {
> + bus-width = <24>;
> + remote-endpoint = <&dpi1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + it66121_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> + };
> + };
> + };
> };
>
> &main_i2c3 {
> @@ -756,3 +871,38 @@
> pinctrl-0 = <&wifi_debug_uart_pins_default>;
> status = "okay";
> };
> +
> +&dss {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dss0_pins_default>;
> +};
> +
> +&dss_ports {
> + /* VP2: DPI Output */
> + port@1 {
> + reg = <1>;
> +
> + dpi1_out: endpoint {
> + remote-endpoint = <&it66121_in>;
> + };
> + };
> +};
> +
> +&mcasp1 {
> + status = "okay";
> + #sound-dai-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcasp_hdmi_pins_default>;
> + auxclk-fs-ratio = <2177>;
> + op-mode = <0>; /* MCASP_IIS_MODE */
> + tdm-slots = <2>;
> + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> + 1 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + >;
> + tx-num-evt = <32>;
> + rx-num-evt = <32>;
> +};
> diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
> index 3f9ef4053aa6..7c98c1b855d1 100644
> --- a/arch/arm/dts/k3-am625-sk.dts
> +++ b/arch/arm/dts/k3-am625-sk.dts
> @@ -212,7 +212,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&ospi0_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> --
> 2.40.0
next prev parent reply other threads:[~2023-09-12 12:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-11 14:02 [PATCH 0/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1 Nishanth Menon
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
2023-09-12 7:04 ` Dhruva Gole
2023-09-12 12:08 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
2023-09-12 6:47 ` Dhruva Gole
2023-09-12 12:11 ` Mattijs Korpershoek [this message]
2023-09-19 15:14 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r0n3lhgj.fsf@baylibre.com \
--to=mkorpershoek@baylibre.com \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=emanuele.ghidoli@toradex.com \
--cc=francesco.dolcini@toradex.com \
--cc=jan.kiszka@siemens.com \
--cc=marcel@ziswiler.com \
--cc=n-francis@ti.com \
--cc=nm@ti.com \
--cc=praneeth@ti.com \
--cc=robertcnelson@gmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.