From: Vagrant Cascadian <vagrant@debian.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 5/5] sunxi: DT: add support for Pinebook
Date: Thu, 18 Oct 2018 09:32:17 -0700 [thread overview]
Message-ID: <87r2gn43n2.fsf@aikidev.net> (raw)
In-Reply-To: <20181018055651.10249-6-anarsoul@gmail.com>
On 2018-10-17, Vasily Khoruzhick <anarsoul@gmail.com> wrote:
> Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
> USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
> bridge from Analogix.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
> Cc: Vagrant Cascadian <vagrant@debian.org>
Working great on my pinebook! Thanks!
Depends on the sunxi-pwm fixes recently posted for working LCD backlight
at the u-boot prompt:
https://patchwork.ozlabs.org/project/uboot/list/?series=71167
Tested-by: Vagrant Cascadian <vagrant@debian.org>
live well,
vagrant
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 +
> arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++
> configs/pinebook_defconfig | 22 ++
> 4 files changed, 332 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
> create mode 100644 configs/pinebook_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index dfe9335a04..6b8ee81059 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -404,6 +404,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
> sun50i-a64-orangepi-win.dtb \
> sun50i-a64-pine64-plus.dtb \
> sun50i-a64-pine64.dtb \
> + sun50i-a64-pinebook.dtb \
> sun50i-a64-sopine-baseboard.dtb
> dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-optimus.dtb \
> diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> new file mode 100644
> index 0000000000..a99b7171d0
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
> + *
> + */
> +
> +/* The ANX6345 eDP-bridge is on r_i2c */
> +&r_i2c {
> + anx6345: edp-bridge at 38 {
> + compatible = "analogix,anx6345";
> + reg = <0x38>;
> + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
> + status = "okay";
> + };
> +};
> diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
> new file mode 100644
> index 0000000000..a3b0526ef6
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-a64-pinebook.dts
> @@ -0,0 +1,294 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
> + * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "Pinebook";
> + compatible = "pine64,pinebook", "allwinner,sun50i-a64";
> +
> + aliases {
> + serial0 = &uart0;
> + ethernet0 = &rtl8723cs;
> + };
> +
> + vdd_bl: regulator at 0 {
> + compatible = "regulator-fixed";
> + regulator-name = "bl-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
> + enable-active-high;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm 0 50000 0>;
> + brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
> + default-brightness-level = <2>;
> + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
> + power-supply = <&vdd_bl>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> +
> + framebuffer-lcd {
> + panel-supply = <®_dc1sw>;
> + dvdd25-supply = <®_dldo2>;
> + dvdd12-supply = <®_fldo1>;
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> +
> + lid_switch {
> + label = "Lid Switch";
> + gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
> + };
> +};
> +
> +&ehci0 {
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins>;
> + vmmc-supply = <®_dcdc1>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins>;
> + vmmc-supply = <®_dldo4>;
> + vqmmc-supply = <®_eldo1>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + rtl8723cs: wifi at 1 {
> + reg = <1>;
> + };
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_pins>;
> + vmmc-supply = <®_dcdc1>;
> + vqmmc-supply = <®_eldo1>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + mmc-hs200-1_8v;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + phys = <&usbphy 0>;
> + phy-names = "usb";
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&pwm {
> + status = "okay";
> +};
> +
> +&r_rsb {
> + status = "okay";
> +
> + axp803: pmic at 3a3 {
> + compatible = "x-powers,axp803";
> + reg = <0x3a3>;
> + interrupt-parent = <&r_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +/* The ANX6345 eDP-bridge is on r_i2c */
> +&r_i2c {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&r_i2c_pins_a>;
> + status = "okay";
> +};
> +
> +#include "axp803.dtsi"
> +
> +®_aldo1 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-name = "vcc-csi";
> +};
> +
> +®_aldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-pl";
> +};
> +
> +®_aldo3 {
> + regulator-always-on;
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-pll-avcc";
> +};
> +
> +®_dc1sw {
> + regulator-name = "vcc-lcd";
> +};
> +
> +®_dcdc1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-3v3";
> +};
> +
> +®_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-name = "vdd-cpux";
> +};
> +
> +/* DCDC3 is polyphased with DCDC2 */
> +
> +®_dcdc5 {
> + regulator-always-on;
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-name = "vcc-dram";
> +};
> +
> +®_dcdc6 {
> + regulator-always-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-name = "vdd-sys";
> +};
> +
> +®_dldo1 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-hdmi";
> +};
> +
> +®_dldo2 {
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-name = "vcc-edp";
> +};
> +
> +®_dldo3 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avdd-csi";
> +};
> +
> +®_dldo4 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-wifi";
> +};
> +
> +®_eldo1 {
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "cpvdd";
> +};
> +
> +®_eldo3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vdd-1v8-csi";
> +};
> +
> +®_fldo1 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-name = "vcc-1v2-hsic";
> +};
> +
> +®_fldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-name = "vdd-cpus";
> +};
> +
> +®_ldo_io0 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-usb";
> + status = "okay";
> +};
> +
> +®_rtc_ldo {
> + regulator-name = "vcc-rtc";
> +};
> +
> +&simplefb_hdmi {
> + vcc-hdmi-supply = <®_dldo1>;
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "host";
> +};
> +
> +&usbphy {
> + usb0_vbus-supply = <®_ldo_io0>;
> + usb1_vbus-supply = <®_ldo_io0>;
> + status = "okay";
> +};
> diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
> new file mode 100644
> index 0000000000..5294dbd2eb
> --- /dev/null
> +++ b/configs/pinebook_defconfig
> @@ -0,0 +1,22 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN50I=y
> +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
> +CONFIG_DRAM_CLK=552
> +CONFIG_DRAM_ZQ=3881949
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_R_I2C_ENABLE=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_PWM=y
> +CONFIG_PWM_SUNXI=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
> +# CONFIG_USB_GADGET is not set
> +CONFIG_VIDEO_BRIDGE=y
> +CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
> --
> 2.19.0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181018/d69ed8ca/attachment.sig>
prev parent reply other threads:[~2018-10-18 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-18 5:56 [U-Boot] [PATCH v3 0/5] Add support for Pinebook Vasily Khoruzhick
2018-10-18 5:56 ` [U-Boot] [PATCH v3 1/5] mmc: sunxi: add support for automatic delay calibration Vasily Khoruzhick
2018-10-18 14:18 ` Andre Przywara
2018-10-18 5:56 ` [U-Boot] [PATCH v3 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing Vasily Khoruzhick
2018-10-18 14:18 ` Andre Przywara
2018-10-18 5:56 ` [U-Boot] [PATCH v3 3/5] sunxi: DT: A64: update device tree file for Allwinner A64 SoC Vasily Khoruzhick
2018-10-22 18:22 ` Jagan Teki
2018-10-18 5:56 ` [U-Boot] [PATCH v3 4/5] sun50i: A64: add support for R_I2C controller Vasily Khoruzhick
2018-10-18 5:56 ` [U-Boot] [PATCH v3 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
2018-10-18 16:32 ` Vagrant Cascadian [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r2gn43n2.fsf@aikidev.net \
--to=vagrant@debian.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.