From: "Alex Bennée" <alex.bennee@linaro.org>
To: Jon Doron <arilou@gmail.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v12 17/20] gdbstub: Implement generic set/query (Q/q pkt) with new infra
Date: Fri, 31 May 2019 15:10:20 +0100 [thread overview]
Message-ID: <87sgsu90kz.fsf@zen.linaroharston> (raw)
In-Reply-To: <20190529064148.19856-18-arilou@gmail.com>
Jon Doron <arilou@gmail.com> writes:
> The generic set/query packets contains implementation for varioius
> sub-commands which are required for GDB and also additional commands
> which are QEMU specific.
>
> To see which QEMU specific commands are available use the command
> gdb> maintenance packet qqemu.Supported
>
> Currently the only implemented QEMU specific command is the command
> that sets the single step behavior.
>
> gdb> maintenance packet qqemu.sstepbits
> Will display the MASK bits used to control the single stepping.
>
> gdb> maintenance packet qqemu.sstep
> Will display the current value of the mask used when single stepping.
>
> gdb> maintenance packet Qqemu.sstep:HEX_VALUE
> Will change the single step mask.
>
> Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> gdbstub.c | 559 ++++++++++++++++++++++++++++++++++++------------------
> 1 file changed, 373 insertions(+), 186 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 648191a3b0..80fe5b2d0c 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -1130,14 +1130,6 @@ static GDBThreadIdKind read_thread_id(const char *buf, const char **end_buf,
> return GDB_ONE_THREAD;
> }
>
> -static int is_query_packet(const char *p, const char *query, char separator)
> -{
> - unsigned int query_len = strlen(query);
> -
> - return strncmp(p, query, query_len) == 0 &&
> - (p[query_len] == '\0' || p[query_len] == separator);
> -}
> -
> /**
> * gdb_handle_vcont - Parses and handles a vCont packet.
> * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there is
> @@ -1918,18 +1910,368 @@ static void handle_v_commands(GdbCmdContext *gdb_ctx, void *user_ctx)
> }
> }
>
> -static int gdb_handle_packet(GDBState *s, const char *line_buf)
> +static void handle_query_qemu_sstepbits(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf),
> + "ENABLE=%x,NOIRQ=%x,NOTIMER=%x", SSTEP_ENABLE,
> + SSTEP_NOIRQ, SSTEP_NOTIMER);
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> +}
> +
> +static void handle_set_qemu_sstep(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + if (!gdb_ctx->num_params) {
> + return;
> + }
> +
> + sstep_flags = gdb_ctx->params[0].val_ul;
> + put_packet(gdb_ctx->s, "OK");
> +}
> +
> +static void handle_query_qemu_sstep(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "0x%x", sstep_flags);
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> +}
> +
> +static void handle_query_curr_tid(GdbCmdContext *gdb_ctx, void *user_ctx)
> {
> CPUState *cpu;
> GDBProcess *process;
> + char thread_id[16];
> +
> + /*
> + * "Current thread" remains vague in the spec, so always return
> + * the first thread of the current process (gdb returns the
> + * first thread).
> + */
> + process = gdb_get_cpu_process(gdb_ctx->s, gdb_ctx->s->g_cpu);
> + cpu = get_first_cpu_in_process(gdb_ctx->s, process);
> + gdb_fmt_thread_id(gdb_ctx->s, cpu, thread_id, sizeof(thread_id));
> + snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "QC%s", thread_id);
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> +}
> +
> +static void handle_query_threads(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + char thread_id[16];
> +
> + if (!gdb_ctx->s->query_cpu) {
> + put_packet(gdb_ctx->s, "l");
> + return;
> + }
> +
> + gdb_fmt_thread_id(gdb_ctx->s, gdb_ctx->s->query_cpu, thread_id,
> + sizeof(thread_id));
> + snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "m%s", thread_id);
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> + gdb_ctx->s->query_cpu =
> + gdb_next_attached_cpu(gdb_ctx->s, gdb_ctx->s->query_cpu);
> +}
> +
> +static void handle_query_first_threads(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + gdb_ctx->s->query_cpu = gdb_first_attached_cpu(gdb_ctx->s);
> + handle_query_threads(gdb_ctx, user_ctx);
> +}
> +
> +static void handle_query_thread_extra(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + CPUState *cpu;
> + int len;
> +
> + if (!gdb_ctx->num_params ||
> + gdb_ctx->params[0].thread_id.kind == GDB_READ_THREAD_ERR) {
> + put_packet(gdb_ctx->s, "E22");
> + return;
> + }
> +
> + cpu = gdb_get_cpu(gdb_ctx->s, gdb_ctx->params[0].thread_id.pid,
> + gdb_ctx->params[0].thread_id.tid);
> + if (!cpu) {
> + return;
> + }
> +
> + cpu_synchronize_state(cpu);
> +
> + if (gdb_ctx->s->multiprocess && (gdb_ctx->s->process_num > 1)) {
> + /* Print the CPU model and name in multiprocess mode */
> + ObjectClass *oc = object_get_class(OBJECT(cpu));
> + const char *cpu_model = object_class_get_name(oc);
> + char *cpu_name = object_get_canonical_path_component(OBJECT(cpu));
> + len = snprintf((char *)gdb_ctx->mem_buf, sizeof(gdb_ctx->str_buf) / 2,
> + "%s %s [%s]", cpu_model, cpu_name,
> + cpu->halted ? "halted " : "running");
> + g_free(cpu_name);
> + } else {
> + /* memtohex() doubles the required space */
> + len = snprintf((char *)gdb_ctx->mem_buf, sizeof(gdb_ctx->str_buf) / 2,
> + "CPU#%d [%s]", cpu->cpu_index,
> + cpu->halted ? "halted " : "running");
> + }
> + trace_gdbstub_op_extra_info((char *)gdb_ctx->mem_buf);
> + memtohex(gdb_ctx->str_buf, gdb_ctx->mem_buf, len);
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> +}
> +
> +#ifdef CONFIG_USER_ONLY
> +static void handle_query_offsets(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + TaskState *ts;
> +
> + ts = gdb_ctx->s->c_cpu->opaque;
> + snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf),
> + "Text=" TARGET_ABI_FMT_lx ";Data=" TARGET_ABI_FMT_lx
> + ";Bss=" TARGET_ABI_FMT_lx,
> + ts->info->code_offset,
> + ts->info->data_offset,
> + ts->info->data_offset);
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> +}
> +#else
> +static void handle_query_rcmd(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + int len;
> +
> + if (!gdb_ctx->num_params) {
> + put_packet(gdb_ctx->s, "E22");
> + return;
> + }
> +
> + len = strlen(gdb_ctx->params[0].data);
> + if (len % 2) {
> + put_packet(gdb_ctx->s, "E01");
> + return;
> + }
> +
> + len = len / 2;
> + hextomem(gdb_ctx->mem_buf, gdb_ctx->params[0].data, len);
> + gdb_ctx->mem_buf[len++] = 0;
> + qemu_chr_be_write(gdb_ctx->s->mon_chr, gdb_ctx->mem_buf, len);
> + put_packet(gdb_ctx->s, "OK");
> +
> +}
> +#endif
> +
> +static void handle_query_supported(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> CPUClass *cc;
> +
> + snprintf(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), "PacketSize=%x",
> + MAX_PACKET_LENGTH);
> + cc = CPU_GET_CLASS(first_cpu);
> + if (cc->gdb_core_xml_file) {
> + pstrcat(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf),
> + ";qXfer:features:read+");
> + }
> +
> + if (gdb_ctx->num_params &&
> + strstr(gdb_ctx->params[0].data, "multiprocess+")) {
> + gdb_ctx->s->multiprocess = true;
> + }
> +
> + pstrcat(gdb_ctx->str_buf, sizeof(gdb_ctx->str_buf), ";multiprocess+");
> + put_packet(gdb_ctx->s, gdb_ctx->str_buf);
> +}
> +
> +static void handle_query_xfer_features(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + GDBProcess *process;
> + CPUClass *cc;
> + unsigned long len, total_len, addr;
> + const char *xml;
> const char *p;
> - uint32_t pid, tid;
> - int ch, type;
> +
> + if (gdb_ctx->num_params < 3) {
> + put_packet(gdb_ctx->s, "E22");
> + return;
> + }
> +
> + process = gdb_get_cpu_process(gdb_ctx->s, gdb_ctx->s->g_cpu);
> + cc = CPU_GET_CLASS(gdb_ctx->s->g_cpu);
> + if (!cc->gdb_core_xml_file) {
> + put_packet(gdb_ctx->s, "");
> + return;
> + }
> +
> + gdb_has_xml = true;
> + p = gdb_ctx->params[0].data;
> + xml = get_feature_xml(gdb_ctx->s, p, &p, process);
> + if (!xml) {
> + put_packet(gdb_ctx->s, "E00");
> + return;
> + }
> +
> + addr = gdb_ctx->params[1].val_ul;
> + len = gdb_ctx->params[2].val_ul;
> + total_len = strlen(xml);
> + if (addr > total_len) {
> + put_packet(gdb_ctx->s, "E00");
> + return;
> + }
> +
> + if (len > (MAX_PACKET_LENGTH - 5) / 2) {
> + len = (MAX_PACKET_LENGTH - 5) / 2;
> + }
> +
> + if (len < total_len - addr) {
> + gdb_ctx->str_buf[0] = 'm';
> + len = memtox(gdb_ctx->str_buf + 1, xml + addr, len);
> + } else {
> + gdb_ctx->str_buf[0] = 'l';
> + len = memtox(gdb_ctx->str_buf + 1, xml + addr, total_len - addr);
> + }
> +
> + put_packet_binary(gdb_ctx->s, gdb_ctx->str_buf, len + 1, true);
> +}
> +
> +static void handle_query_attached(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + put_packet(gdb_ctx->s, GDB_ATTACHED);
> +}
> +
> +static void handle_query_qemu_supported(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + put_packet(gdb_ctx->s, "sstepbits;sstep");
> +}
> +
> +static GdbCmdParseEntry gdb_gen_query_set_common_table[] = {
> + /* Order is important if has same prefix */
> + {
> + .handler = handle_query_qemu_sstepbits,
> + .cmd = "qemu.sstepbits",
> + },
> + {
> + .handler = handle_query_qemu_sstep,
> + .cmd = "qemu.sstep",
> + },
> + {
> + .handler = handle_set_qemu_sstep,
> + .cmd = "qemu.sstep=",
> + .cmd_startswith = 1,
> + .schema = "l0"
> + },
> +};
> +
> +static GdbCmdParseEntry gdb_gen_query_table[] = {
> + {
> + .handler = handle_query_curr_tid,
> + .cmd = "C",
> + },
> + {
> + .handler = handle_query_threads,
> + .cmd = "sThreadInfo",
> + },
> + {
> + .handler = handle_query_first_threads,
> + .cmd = "fThreadInfo",
> + },
> + {
> + .handler = handle_query_thread_extra,
> + .cmd = "ThreadExtraInfo,",
> + .cmd_startswith = 1,
> + .schema = "t0"
> + },
> +#ifdef CONFIG_USER_ONLY
> + {
> + .handler = handle_query_offsets,
> + .cmd = "Offsets",
> + },
> +#else
> + {
> + .handler = handle_query_rcmd,
> + .cmd = "Rcmd,",
> + .cmd_startswith = 1,
> + .schema = "s0"
> + },
> +#endif
> + {
> + .handler = handle_query_supported,
> + .cmd = "Supported:",
> + .cmd_startswith = 1,
> + .schema = "s0"
> + },
> + {
> + .handler = handle_query_supported,
> + .cmd = "Supported",
> + .schema = "s0"
> + },
> + {
> + .handler = handle_query_xfer_features,
> + .cmd = "Xfer:features:read:",
> + .cmd_startswith = 1,
> + .schema = "s:l,l0"
> + },
> + {
> + .handler = handle_query_attached,
> + .cmd = "Attached:",
> + .cmd_startswith = 1
> + },
> + {
> + .handler = handle_query_attached,
> + .cmd = "Attached",
> + },
> + {
> + .handler = handle_query_qemu_supported,
> + .cmd = "qemu.Supported",
> + },
> +};
> +
> +static GdbCmdParseEntry gdb_gen_set_table[] = {
> + /* Order is important if has same prefix */
> + {
> + .handler = handle_set_qemu_sstep,
> + .cmd = "qemu.sstep:",
> + .cmd_startswith = 1,
> + .schema = "l0"
> + },
> +};
> +
> +static void handle_gen_query(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + if (!gdb_ctx->num_params) {
> + return;
> + }
> +
> + if (!process_string_cmd(gdb_ctx->s, NULL, gdb_ctx->params[0].data,
> + gdb_gen_query_set_common_table,
> + ARRAY_SIZE(gdb_gen_query_set_common_table))) {
> + return;
> + }
> +
> + if (process_string_cmd(gdb_ctx->s, NULL, gdb_ctx->params[0].data,
> + gdb_gen_query_table,
> + ARRAY_SIZE(gdb_gen_query_table))) {
> + put_packet(gdb_ctx->s, "");
> + }
> +}
> +
> +static void handle_gen_set(GdbCmdContext *gdb_ctx, void *user_ctx)
> +{
> + if (!gdb_ctx->num_params) {
> + return;
> + }
> +
> + if (!process_string_cmd(gdb_ctx->s, NULL, gdb_ctx->params[0].data,
> + gdb_gen_query_set_common_table,
> + ARRAY_SIZE(gdb_gen_query_set_common_table))) {
> + return;
> + }
> +
> + if (process_string_cmd(gdb_ctx->s, NULL, gdb_ctx->params[0].data,
> + gdb_gen_set_table,
> + ARRAY_SIZE(gdb_gen_set_table))) {
> + put_packet(gdb_ctx->s, "");
> + }
> +}
> +
> +static int gdb_handle_packet(GDBState *s, const char *line_buf)
> +{
> + const char *p;
> + int ch;
> uint8_t mem_buf[MAX_PACKET_LENGTH];
> char buf[sizeof(mem_buf) + 1 /* trailing NUL */];
> char thread_id[16];
> - target_ulong addr, len;
> const GdbCmdParseEntry *cmd_parser = NULL;
>
> trace_gdbstub_io_command(line_buf);
> @@ -2131,183 +2473,28 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
> }
> break;
> case 'q':
> - case 'Q':
> - /* parse any 'q' packets here */
> - if (!strcmp(p,"qemu.sstepbits")) {
> - /* Query Breakpoint bit definitions */
> - snprintf(buf, sizeof(buf), "ENABLE=%x,NOIRQ=%x,NOTIMER=%x",
> - SSTEP_ENABLE,
> - SSTEP_NOIRQ,
> - SSTEP_NOTIMER);
> - put_packet(s, buf);
> - break;
> - } else if (is_query_packet(p, "qemu.sstep", '=')) {
> - /* Display or change the sstep_flags */
> - p += 10;
> - if (*p != '=') {
> - /* Display current setting */
> - snprintf(buf, sizeof(buf), "0x%x", sstep_flags);
> - put_packet(s, buf);
> - break;
> - }
> - p++;
> - type = strtoul(p, (char **)&p, 16);
> - sstep_flags = type;
> - put_packet(s, "OK");
> - break;
> - } else if (strcmp(p,"C") == 0) {
> - /*
> - * "Current thread" remains vague in the spec, so always return
> - * the first thread of the current process (gdb returns the
> - * first thread).
> - */
> - cpu = get_first_cpu_in_process(s, gdb_get_cpu_process(s, s->g_cpu));
> - snprintf(buf, sizeof(buf), "QC%s",
> - gdb_fmt_thread_id(s, cpu, thread_id, sizeof(thread_id)));
> - put_packet(s, buf);
> - break;
> - } else if (strcmp(p,"fThreadInfo") == 0) {
> - s->query_cpu = gdb_first_attached_cpu(s);
> - goto report_cpuinfo;
> - } else if (strcmp(p,"sThreadInfo") == 0) {
> - report_cpuinfo:
> - if (s->query_cpu) {
> - snprintf(buf, sizeof(buf), "m%s",
> - gdb_fmt_thread_id(s, s->query_cpu,
> - thread_id, sizeof(thread_id)));
> - put_packet(s, buf);
> - s->query_cpu = gdb_next_attached_cpu(s, s->query_cpu);
> - } else
> - put_packet(s, "l");
> - break;
> - } else if (strncmp(p,"ThreadExtraInfo,", 16) == 0) {
> - if (read_thread_id(p + 16, &p, &pid, &tid) == GDB_READ_THREAD_ERR) {
> - put_packet(s, "E22");
> - break;
> - }
> - cpu = gdb_get_cpu(s, pid, tid);
> - if (cpu != NULL) {
> - cpu_synchronize_state(cpu);
> -
> - if (s->multiprocess && (s->process_num > 1)) {
> - /* Print the CPU model and name in multiprocess mode */
> - ObjectClass *oc = object_get_class(OBJECT(cpu));
> - const char *cpu_model = object_class_get_name(oc);
> - char *cpu_name =
> - object_get_canonical_path_component(OBJECT(cpu));
> - len = snprintf((char *)mem_buf, sizeof(buf) / 2,
> - "%s %s [%s]", cpu_model, cpu_name,
> - cpu->halted ? "halted " : "running");
> - g_free(cpu_name);
> - } else {
> - /* memtohex() doubles the required space */
> - len = snprintf((char *)mem_buf, sizeof(buf) / 2,
> - "CPU#%d [%s]", cpu->cpu_index,
> - cpu->halted ? "halted " : "running");
> - }
> - trace_gdbstub_op_extra_info((char *)mem_buf);
> - memtohex(buf, mem_buf, len);
> - put_packet(s, buf);
> - }
> - break;
> - }
> -#ifdef CONFIG_USER_ONLY
> - else if (strcmp(p, "Offsets") == 0) {
> - TaskState *ts = s->c_cpu->opaque;
> -
> - snprintf(buf, sizeof(buf),
> - "Text=" TARGET_ABI_FMT_lx ";Data=" TARGET_ABI_FMT_lx
> - ";Bss=" TARGET_ABI_FMT_lx,
> - ts->info->code_offset,
> - ts->info->data_offset,
> - ts->info->data_offset);
> - put_packet(s, buf);
> - break;
> - }
> -#else /* !CONFIG_USER_ONLY */
> - else if (strncmp(p, "Rcmd,", 5) == 0) {
> - int len = strlen(p + 5);
> -
> - if ((len % 2) != 0) {
> - put_packet(s, "E01");
> - break;
> - }
> - len = len / 2;
> - hextomem(mem_buf, p + 5, len);
> - mem_buf[len++] = 0;
> - qemu_chr_be_write(s->mon_chr, mem_buf, len);
> - put_packet(s, "OK");
> - break;
> - }
> -#endif /* !CONFIG_USER_ONLY */
> - if (is_query_packet(p, "Supported", ':')) {
> - snprintf(buf, sizeof(buf), "PacketSize=%x", MAX_PACKET_LENGTH);
> - cc = CPU_GET_CLASS(first_cpu);
> - if (cc->gdb_core_xml_file != NULL) {
> - pstrcat(buf, sizeof(buf), ";qXfer:features:read+");
> - }
> -
> - if (strstr(p, "multiprocess+")) {
> - s->multiprocess = true;
> - }
> - pstrcat(buf, sizeof(buf), ";multiprocess+");
> -
> - put_packet(s, buf);
> - break;
> - }
> - if (strncmp(p, "Xfer:features:read:", 19) == 0) {
> - const char *xml;
> - target_ulong total_len;
> -
> - process = gdb_get_cpu_process(s, s->g_cpu);
> - cc = CPU_GET_CLASS(s->g_cpu);
> - if (cc->gdb_core_xml_file == NULL) {
> - goto unknown_command;
> - }
> -
> - gdb_has_xml = true;
> - p += 19;
> - xml = get_feature_xml(s, p, &p, process);
> - if (!xml) {
> - snprintf(buf, sizeof(buf), "E00");
> - put_packet(s, buf);
> - break;
> - }
> -
> - if (*p == ':')
> - p++;
> - addr = strtoul(p, (char **)&p, 16);
> - if (*p == ',')
> - p++;
> - len = strtoul(p, (char **)&p, 16);
> -
> - total_len = strlen(xml);
> - if (addr > total_len) {
> - snprintf(buf, sizeof(buf), "E00");
> - put_packet(s, buf);
> - break;
> - }
> - if (len > (MAX_PACKET_LENGTH - 5) / 2)
> - len = (MAX_PACKET_LENGTH - 5) / 2;
> - if (len < total_len - addr) {
> - buf[0] = 'm';
> - len = memtox(buf + 1, xml + addr, len);
> - } else {
> - buf[0] = 'l';
> - len = memtox(buf + 1, xml + addr, total_len - addr);
> - }
> - put_packet_binary(s, buf, len + 1, true);
> - break;
> + {
> + static const GdbCmdParseEntry gen_query_cmd_desc = {
> + .handler = handle_gen_query,
> + .cmd = "q",
> + .cmd_startswith = 1,
> + .schema = "s0"
> + };
> + cmd_parser = &gen_query_cmd_desc;
> }
> - if (is_query_packet(p, "Attached", ':')) {
> - put_packet(s, GDB_ATTACHED);
> - break;
> + break;
> + case 'Q':
> + {
> + static const GdbCmdParseEntry gen_set_cmd_desc = {
> + .handler = handle_gen_set,
> + .cmd = "Q",
> + .cmd_startswith = 1,
> + .schema = "s0"
> + };
> + cmd_parser = &gen_set_cmd_desc;
> }
> - /* Unrecognised 'q' command. */
> - goto unknown_command;
> -
> + break;
> default:
> - unknown_command:
> /* put empty packet */
> buf[0] = '\0';
> put_packet(s, buf);
--
Alex Bennée
next prev parent reply other threads:[~2019-05-31 14:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 6:41 [Qemu-devel] [PATCH v12 00/20] gdbstub: Refactor command packets handler Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 01/20] gdbstub: Add infrastructure to parse cmd packets Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 02/20] gdbstub: Implement deatch (D pkt) with new infra Jon Doron
2019-05-31 13:33 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 03/20] gdbstub: Implement thread_alive (T " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 04/20] gdbstub: Implement continue (c " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 05/20] gdbstub: Implement continue with signal (C " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 06/20] gdbstub: Implement set_thread (H " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 07/20] gdbstub: Implement breakpoint commands (Z/z " Jon Doron
2019-05-31 13:34 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 08/20] gdbstub: Implement set register (P " Jon Doron
2019-05-31 13:37 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 09/20] gdbstub: Implement get register (p " Jon Doron
2019-05-31 13:38 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 10/20] gdbstub: Implement write memory (M " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 11/20] gdbstub: Implement read memory (m " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 12/20] gdbstub: Implement write all registers (G " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 13/20] gdbstub: Implement read all registers (g " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 14/20] gdbstub: Implement file io (F " Jon Doron
2019-05-31 13:39 ` Alex Bennée
2019-05-31 13:41 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 15/20] gdbstub: Implement step (s " Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 16/20] gdbstub: Implement v commands " Jon Doron
2019-05-31 13:42 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 17/20] gdbstub: Implement generic set/query (Q/q pkt) " Jon Doron
2019-05-31 14:10 ` Alex Bennée [this message]
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 18/20] gdbstub: Implement target halted (? " Jon Doron
2019-05-31 14:11 ` Alex Bennée
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 19/20] gdbstub: Clear unused variables in gdb_handle_packet Jon Doron
2019-05-29 6:41 ` [Qemu-devel] [PATCH v12 20/20] gdbstub: Implement qemu physical memory mode Jon Doron
2019-05-31 14:24 ` [Qemu-devel] [PATCH v12 00/20] gdbstub: Refactor command packets handler Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87sgsu90kz.fsf@zen.linaroharston \
--to=alex.bennee@linaro.org \
--cc=arilou@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.