Re: [tcpdump-workers] vlan tagged packets and libpcap breakage

[ebiederm@xmission.com (Eric W. Biederman)]

Ani Sinha <ani@aristanetworks.com> writes:

> On Sat, Nov 17, 2012 at 3:33 PM, Eric W. Biederman
> <ebiederm@xmission.com> wrote:
>> the vlan header in packets as we receive them.
>>
>> The code is correct except for the case of packets in vlan 0.  Currently
>> the packet reconstruction is ambiguous.  The most recent kernels have
>> a TP_STATUS_VLAN_VALID flag that can be checked to see if the packet was
>> in vlan 0 or if there was no vlan at all.  libpcap probably should be
>> taught how to handle TP_STATUS_VLAN_VALID so that it can get the vlan 0
>> handling correct.
>>
>
> May be this?

Two things.

- TP_STATUS_VLAN_VALID lives in the tp_status field not the tp_vlan_tci field.
- To work on older kernels with binaries compiled with newer headers you
  first want to test for tp_vlan_tci == 0 and then look at the status field for
  TP_STATUS_VALID.

Which means the tests need to look something like:

- if (aux->tp_vlan_tci == 0)
+#if defined(TP_STATUS_VLAN_VALID)
+ if ((aux->tp_vlan_tci == 0) && !(aux->tp_status & TP_STATUS_VLAN_VALID))
+#else
+ if (aux->tp_vlan_tci == 0) /* this is ambigious but without the
+
TP_STATUS_VLAN_VALID flag, there is
+                                                      nothing that we can do */
+#endif

 #ifdef HAVE_TPACKET2
- if (handle->md.tp_version == TPACKET_V2 && h.h2->tp_vlan_tci &&
+ if (handle->md.tp_version == TPACKET_V2 &&
+#if defined(TP_STATUS_VLAN_VALID)
+     (h.h2->tp_vlan_tci || (h.h2->tp_status & TP_STATUS_VALID)) &&
+#else
+     h.h2->tp_vlan_tci &&
+#endif

Eric