Re: [PATCH] hw/nvme: Add CLI options for PCI vendor/device IDs and IEEE-OUI ID

[Markus Armbruster <armbru@redhat.com>]

Saif Abrar <saif.abrar@linux.vnet.ibm.com> writes:

> Add CLI options for user specified
> - PCI vendor, device, subsystem vendor and subsystem IDs
> - IEEE-OUI ID
>
> e.g. PCI IDs to be specified as follows:
> -device nvme,id_vendor=0xABCD,id_device=0xA0B0,id_subsys_vendor=0xEF00,id_subsys=0xEF01
>
> IEEE-OUI ID (Identify Controller bytes 75:73) is to be
> specified in LE format.
> (e.g. ieee_oui=0xABCDEF => Byte[73]=0xEF, Byte[74]=0xCD, Byte[75]=0xAB).
>
> Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com>

[...]

> diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
> index 127c3d2383..35aeb48e0b 100644
> --- a/hw/nvme/ctrl.c
> +++ b/hw/nvme/ctrl.c

[...]

> @@ -8451,6 +8480,13 @@ static Property nvme_props[] = {
>                        params.sriov_max_vq_per_vf, 0),
>      DEFINE_PROP_BOOL("msix-exclusive-bar", NvmeCtrl, params.msix_exclusive_bar,
>                       false),
> +    DEFINE_PROP_UINT16("id_vendor", NvmeCtrl, params.id_vendor, 0),
> +    DEFINE_PROP_UINT16("id_device", NvmeCtrl, params.id_device, 0),
> +    DEFINE_PROP_UINT16("id_subsys_vendor", NvmeCtrl,
> +                                                    params.id_subsys_vendor, 0),
> +    DEFINE_PROP_UINT16("id_subsys", NvmeCtrl, params.id_subsys, 0),
> +    DEFINE_PROP("ieee_oui", NvmeCtrl, params.ieee_oui, nvme_prop_ieee,
> +                                                                      uint32_t),
>      DEFINE_PROP_END_OF_LIST(),
>  };

You add properties, not CLI options.  Properties are accessible via CLI
-device, but also via monitor device_add, qom-set, qom-get.

Please rephrase your commit message like "Add properties for".