All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 5/5] drm/i915: Move dsc/joiner enable into hsw_crtc_enable()
Date: Tue, 25 Jan 2022 07:40:04 +0200	[thread overview]
Message-ID: <87tuds1ih7.fsf@intel.com> (raw)
In-Reply-To: <20220124192638.26262-5-ville.syrjala@linux.intel.com>

On Mon, 24 Jan 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Lift the dsc/joiner enable up from the wonky places where it
> currently sits (ddi .pre_enable() or icl_ddi_bigjoiner_pre_enable())
> into hsw_crtc_enable() where we write the other per-pipe stuff
> as well. Makes the transcoder vs. pipe split less confusing.
>

What about the enable call in DSI?

BR,
Jani.

> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c     |  6 ------
>  drivers/gpu/drm/i915/display/intel_display.c | 12 +++++-------
>  2 files changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 2f20abc5122d..5d1f7d6218c5 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -2425,9 +2425,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
>  	intel_ddi_enable_fec(encoder, crtc_state);
>  
>  	intel_dsc_dp_pps_write(encoder, crtc_state);
> -
> -	if (!crtc_state->bigjoiner)
> -		intel_dsc_enable(crtc_state);
>  }
>  
>  static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
> @@ -2493,9 +2490,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
>  		intel_ddi_enable_pipe_clock(encoder, crtc_state);
>  
>  	intel_dsc_dp_pps_write(encoder, crtc_state);
> -
> -	if (!crtc_state->bigjoiner)
> -		intel_dsc_enable(crtc_state);
>  }
>  
>  static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index d2906434ab3f..13b1de03640d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -1974,7 +1974,6 @@ static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state)
>  static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
>  					 const struct intel_crtc_state *crtc_state)
>  {
> -	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
>  	struct intel_crtc_state *master_crtc_state;
>  	struct intel_crtc *master_crtc;
>  	struct drm_connector_state *conn_state;
> @@ -2004,12 +2003,6 @@ static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
>  
>  	if (crtc_state->bigjoiner_slave)
>  		intel_encoders_pre_enable(state, master_crtc);
> -
> -	/* need to enable VDSC, which we skipped in pre-enable */
> -	intel_dsc_enable(crtc_state);
> -
> -	if (DISPLAY_VER(dev_priv) >= 13)
> -		intel_uncompressed_joiner_enable(crtc_state);
>  }
>  
>  static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state)
> @@ -2057,6 +2050,11 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
>  		icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
>  	}
>  
> +	intel_dsc_enable(new_crtc_state);
> +
> +	if (DISPLAY_VER(dev_priv) >= 13)
> +		intel_uncompressed_joiner_enable(new_crtc_state);
> +
>  	intel_set_pipe_src_size(new_crtc_state);
>  	if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
>  		bdw_set_pipemisc(new_crtc_state);

-- 
Jani Nikula, Intel Open Source Graphics Center

  reply	other threads:[~2022-01-25  5:40 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-24 19:26 [Intel-gfx] [PATCH 1/5] drm/i915: Skip dsc readout if the transcoder is disabled Ville Syrjala
2022-01-24 19:26 ` [Intel-gfx] [PATCH 2/5] drm/i915: Simplify intel_dsc_source_support() Ville Syrjala
2022-01-24 19:26 ` [Intel-gfx] [PATCH 3/5] drm/i915: Use per-device debugs for bigjoiner stuff Ville Syrjala
2022-01-24 19:26 ` [Intel-gfx] [PATCH 4/5] drm/i915: Extract hsw_configure_cpu_transcoder() Ville Syrjala
2022-01-25  5:38   ` Jani Nikula
2022-01-24 19:26 ` [Intel-gfx] [PATCH 5/5] drm/i915: Move dsc/joiner enable into hsw_crtc_enable() Ville Syrjala
2022-01-25  5:40   ` Jani Nikula [this message]
2022-01-25  5:59     ` Ville Syrjälä
2022-01-25  6:39   ` [Intel-gfx] [PATCH v2 " Ville Syrjala
2022-01-25  6:50     ` Jani Nikula
2022-01-25  7:07       ` Ville Syrjälä
2022-01-24 23:59 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Skip dsc readout if the transcoder is disabled Patchwork
2022-01-25  5:36 ` [Intel-gfx] [PATCH 1/5] " Jani Nikula
2022-01-25  5:38 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [1/5] " Patchwork
2022-01-25  8:20 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [1/5] drm/i915: Skip dsc readout if the transcoder is disabled (rev2) Patchwork
2022-01-26  7:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Skip dsc readout if the transcoder is disabled (rev3) Patchwork
2022-01-26 10:00 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87tuds1ih7.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.