From: "Alex Bennée" <alex.bennee@linaro.org>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-devel@nongnu.org, peter.maydell@linaro.org, qemu-stable@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v4 05/11] target/arm: Introduce and use read_fp_hreg
Date: Tue, 15 May 2018 11:39:05 +0100 [thread overview]
Message-ID: <87tvr9fbjq.fsf@linaro.org> (raw)
In-Reply-To: <20180512003217.9105-6-richard.henderson@linaro.org>
Richard Henderson <richard.henderson@linaro.org> writes:
> Cc: qemu-stable@nongnu.org
> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> target/arm/translate-a64.c | 30 ++++++++++++++----------------
> 1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
> index d0ed125442..78f12daaf6 100644
> --- a/target/arm/translate-a64.c
> +++ b/target/arm/translate-a64.c
> @@ -615,6 +615,14 @@ static TCGv_i32 read_fp_sreg(DisasContext *s, int reg)
> return v;
> }
>
> +static TCGv_i32 read_fp_hreg(DisasContext *s, int reg)
> +{
> + TCGv_i32 v = tcg_temp_new_i32();
> +
> + tcg_gen_ld16u_i32(v, cpu_env, fp_reg_offset(s, reg, MO_16));
> + return v;
> +}
> +
> /* Clear the bits above an N-bit vector, for N = (is_q ? 128 : 64).
> * If SVE is not enabled, then there are only 128 bits in the vector.
> */
> @@ -4881,11 +4889,9 @@ static void disas_fp_csel(DisasContext *s, uint32_t insn)
> static void handle_fp_1src_half(DisasContext *s, int opcode, int rd, int rn)
> {
> TCGv_ptr fpst = NULL;
> - TCGv_i32 tcg_op = tcg_temp_new_i32();
> + TCGv_i32 tcg_op = read_fp_hreg(s, rn);
> TCGv_i32 tcg_res = tcg_temp_new_i32();
>
> - read_vec_element_i32(s, tcg_op, rn, 0, MO_16);
> -
> switch (opcode) {
> case 0x0: /* FMOV */
> tcg_gen_mov_i32(tcg_res, tcg_op);
> @@ -7784,13 +7790,10 @@ static void disas_simd_scalar_three_reg_diff(DisasContext *s, uint32_t insn)
> tcg_temp_free_i64(tcg_op2);
> tcg_temp_free_i64(tcg_res);
> } else {
> - TCGv_i32 tcg_op1 = tcg_temp_new_i32();
> - TCGv_i32 tcg_op2 = tcg_temp_new_i32();
> + TCGv_i32 tcg_op1 = read_fp_hreg(s, rn);
> + TCGv_i32 tcg_op2 = read_fp_hreg(s, rm);
> TCGv_i64 tcg_res = tcg_temp_new_i64();
>
> - read_vec_element_i32(s, tcg_op1, rn, 0, MO_16);
> - read_vec_element_i32(s, tcg_op2, rm, 0, MO_16);
> -
> gen_helper_neon_mull_s16(tcg_res, tcg_op1, tcg_op2);
> gen_helper_neon_addl_saturate_s32(tcg_res, cpu_env, tcg_res, tcg_res);
>
> @@ -8331,13 +8334,10 @@ static void disas_simd_scalar_three_reg_same_fp16(DisasContext *s,
>
> fpst = get_fpstatus_ptr(true);
>
> - tcg_op1 = tcg_temp_new_i32();
> - tcg_op2 = tcg_temp_new_i32();
> + tcg_op1 = read_fp_hreg(s, rn);
> + tcg_op2 = read_fp_hreg(s, rm);
> tcg_res = tcg_temp_new_i32();
>
> - read_vec_element_i32(s, tcg_op1, rn, 0, MO_16);
> - read_vec_element_i32(s, tcg_op2, rm, 0, MO_16);
> -
> switch (fpopcode) {
> case 0x03: /* FMULX */
> gen_helper_advsimd_mulxh(tcg_res, tcg_op1, tcg_op2, fpst);
> @@ -12235,11 +12235,9 @@ static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn)
> }
>
> if (is_scalar) {
> - TCGv_i32 tcg_op = tcg_temp_new_i32();
> + TCGv_i32 tcg_op = read_fp_hreg(s, rn);
> TCGv_i32 tcg_res = tcg_temp_new_i32();
>
> - read_vec_element_i32(s, tcg_op, rn, 0, MO_16);
> -
> switch (fpop) {
> case 0x1a: /* FCVTNS */
> case 0x1b: /* FCVTMS */
--
Alex Bennée
next prev parent reply other threads:[~2018-05-15 10:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-12 0:32 [Qemu-devel] [PATCH v4 00/11] target/arm: Fixups for ARM_FEATURE_V8_FP16 Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 01/11] target/arm: Implement FMOV (general) for fp16 Richard Henderson
2018-05-15 10:37 ` Alex Bennée
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 02/11] target/arm: Early exit after unallocated_encoding in disas_fp_int_conv Richard Henderson
2018-05-15 10:37 ` Alex Bennée
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 03/11] target/arm: Implement FCVT (scalar, integer) for fp16 Richard Henderson
2018-05-13 7:21 ` Alex Bennée
2018-05-14 15:01 ` Richard Henderson
2018-05-14 15:52 ` Alex Bennée
2018-05-15 10:42 ` Alex Bennée
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 04/11] target/arm: Implement FCVT (scalar, fixed-point) " Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 05/11] target/arm: Introduce and use read_fp_hreg Richard Henderson
2018-05-15 10:39 ` Alex Bennée [this message]
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 06/11] target/arm: Implement FP data-processing (2 source) for fp16 Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 07/11] target/arm: Implement FP data-processing (3 " Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 08/11] target/arm: Implement FCMP " Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 09/11] target/arm: Implement FCSEL " Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 10/11] target/arm: Implement FMOV (immediate) " Richard Henderson
2018-05-12 0:32 ` [Qemu-devel] [PATCH v4 11/11] target/arm: Fix sqrt_f16 exception raising Richard Henderson
2018-05-13 7:22 ` [Qemu-devel] [PATCH v4 00/11] target/arm: Fixups for ARM_FEATURE_V8_FP16 Alex Bennée
2018-05-14 15:16 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tvr9fbjq.fsf@linaro.org \
--to=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.