From: Jani Nikula <jani.nikula@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>,
Takashi Iwai <tiwai@suse.de>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
"Peres, Martin" <martin.peres@intel.com>,
"Kaskinen, Tanu" <tanu.kaskinen@intel.com>,
Liam Girdwood <liam.r.girdwood@intel.com>,
Daniel Vetter <daniel.vetter@intel.com>
Subject: Re: [PATCH] drm/i915: Enable runtime pm
Date: Tue, 07 Nov 2017 18:45:36 +0200 [thread overview]
Message-ID: <87tvy6avgv.fsf@intel.com> (raw)
In-Reply-To: <20171107161821.7747-1-daniel.vetter@ffwll.ch>
On Tue, 07 Nov 2017, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
> Now that we have CI, and that pm_rpm fully passes (I guess the audio
> folks have implemented proper runtime pm for snd-hda, hooray, pls
> confirm) it's time to enable this again by default.
>
> Real goal here is to have 1 configuration only that we fully support,
> instead of tons of different codes with every user/customer tuning it
> differently. And really, power stuff should work by default, and
> should be enabled by everywhere where it is save to do so.
>
> v2: Completely new commit message, a few years passed since v1 ...
I suppose this is something that could use more than a single round of
IGT CI before merging...?
BR,
Jani.
>
> Cc: Takashi Iwai <tiwai@suse.de>
> Cc: Liam Girdwood <liam.r.girdwood@intel.com>
> Cc: "Yang, Libin" <libin.yang@intel.com>
> Cc: "Lin, Mengdong" <mengdong.lin@intel.com>
> Cc: "Li, Jocelyn" <jocelyn.li@intel.com>
> Cc: "Kaskinen, Tanu" <tanu.kaskinen@intel.com>
> Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> ---
> drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 8315499452dc..dc24d008d8d4 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3232,7 +3232,7 @@ void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
> struct pci_dev *pdev = dev_priv->drm.pdev;
> struct device *kdev = &pdev->dev;
>
> - pm_runtime_set_autosuspend_delay(kdev, 10000); /* 10s */
> + pm_runtime_set_autosuspend_delay(kdev, 100);
> pm_runtime_mark_last_busy(kdev);
>
> /*
> @@ -3251,6 +3251,8 @@ void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
> pm_runtime_use_autosuspend(kdev);
> }
>
> + pm_runtime_allow(kdev);
> +
> /*
> * The core calls the driver load handler with an RPM reference held.
> * We drop that here and will reacquire it during unloading in
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-11-07 16:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-07 16:18 [PATCH] drm/i915: Enable runtime pm Daniel Vetter
2017-11-07 16:38 ` ✗ Fi.CI.BAT: failure for " Patchwork
2017-11-07 16:45 ` Jani Nikula [this message]
2017-11-07 16:53 ` [PATCH] " Daniel Vetter
2017-11-08 12:24 ` ✗ Fi.CI.BAT: warning for " Patchwork
2017-11-08 14:25 ` [PATCH] " David Weinehall
2017-11-16 18:24 ` David Weinehall
2017-11-16 20:45 ` Paulo Zanoni
2017-11-16 21:11 ` Chris Wilson
2017-11-17 8:39 ` David Weinehall
-- strict thread matches above, loose matches on Subject: below --
2015-05-08 18:51 Daniel Vetter
2015-05-09 14:59 ` shuang.he
2015-05-12 17:40 ` Jesse Barnes
2015-06-16 8:34 ` Daniel Vetter
2015-06-16 10:42 ` Liam Girdwood
2015-06-18 7:46 ` Yang, Libin
2015-06-16 12:23 ` Paulo Zanoni
2015-06-16 12:26 ` Paulo Zanoni
2015-06-16 18:40 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tvy6avgv.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=liam.r.girdwood@intel.com \
--cc=martin.peres@intel.com \
--cc=paulo.r.zanoni@intel.com \
--cc=tanu.kaskinen@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.